Vous avez aussi la possibilité à réussir le test IBM C2180-270. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.
Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo IBM C2180-270 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test IBM C2180-270 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test IBM C2180-270.
L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification IBM C2180-270. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification IBM C2180-270.
Code d'Examen: C2180-270
Nom d'Examen: IBM (IBM Business Process Manager Advanced V7.5, Integration Development )
Questions et réponses: 56 Q&As
Le test de Certification IBM C2180-270 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.
Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test IBM C2180-270. La ressourece providée par Pass4Test peut juste s'accorder votre demande.
C2180-270 Démo gratuit à télécharger: http://www.pass4test.fr/C2180-270.html
NO.1 A business analyst has made several runtime changes to deployed business rules that were
implemented in IBM Integration Designer (IID). Which task should the integration developer perform so
that the rule group can be imported using IID, and the changes are reflected in the project source?
A. Use the administrative console to export the rule group.
B. Use the Business Rule Manager application to export the rule group.
C. Use the Business Rules widget in Business Space to export the rule group.
D. Use the Business Process Choreographer (BPC) Explorer to export the rule group information.
Answer: A
IBM C2180-270 examen certification C2180-270 C2180-270 certification C2180-270
NO.2 An integration developer has developed the following business process, as shown in the exhibit: The
invoke activities Invoke1 and Invoke2 are synchronous invocations and execute in a few seconds. A
compensation handler needs to be defined for Snippet2 following a business action from the customer.
The customer considers performance to be a key requirement. How would the integration developer
implement these requirements? The business process needs to be a:
A. long-running process because of the required fault handler.
B. long-running process because of the required compensation handler.
C. microflow because no human tasks are required.
D. microflow for best performance as every invoke activity uses synchronous invocation and executes
quickly.
Answer: B
certification IBM C2180-270 examen certification C2180-270
NO.3 An integration developer needs to rewrite business rule logic written in Java using a business rule
component. The integration developer has implemented the selector shown in the exhibits below.
What behavior will the integration developer observe with the configured selector?
A. The module will fail to compile because there is no wiring between the selector and the destination
components.
B. The module will fail to compile because the destination of the selector can only be rule logic or decision
table.
C. The runtime exception will be thrown because there is no default component configured.
D. The runtime exception will be thrown if the date when the selector is invoked does not fall in any of the
specified date ranges.
Answer: D
IBM C2180-270 certification C2180-270 C2180-270
NO.4 An integration developer has configured a business state machine, as shown below:
What behavior will the integration developer observe when executing the flow?
A. If Condition3 is false, then Exit1 will execute after Timeout2 expires.
B. If Condition1 and Condition2 are both true, then a runtime exception will be thrown.
C. If Condition1 is false, then Timeout1 will not be evaluated.
D. If Condition1 and Condition2 are both false, then operation2 will be called by the business state
machine.
Answer: A
certification IBM C2180-270 examen C2180-270
NO.5 An integration developer is testing the process shown in the following exhibits.
If the integration developer starts an instance of the ProcessA process with an input of "HELLO", which of
the following strings will the LogSnippet snippet write to System.out?
A. output1=ORIGINAL :: aString=ORIGINAL
B. output1=ORIGINAL :: aString=MODIFIED
C. output1=MODIFIED :: aString=ORIGINAL
D. output1=MODIFIED :: aString=MODIFIED
Answer: C
IBM C2180-270 examen C2180-270
NO.6 An integration developer has configured a BPEL business process for a customer, as shown below:
Assume that max is greater than min. What should the integration developer take into account when
implementing this for each loop?
A. There must be an array associated with the for each loop.
B. It is possible to exit the loop before Index is equal to max.
C. The values of min and max cannot be changed once the for each activity begins.
D. If the scope inside of the for each activity is set to isolated, then the activities will run sequentially.
Answer: D
IBM certification C2180-270 C2180-270 examen C2180-270 C2180-270 C2180-270
NO.7 An integration developer needs to check which Common Event Infrastructure (CEI) events have been
generated for a business process and review the information contained inside each event. Where will the
integration developer find this information?
A. In the Common Base Event browser application.
B. In the monitoring widgets in Business Space.
C. In the administrative console -> Service Integration -> Common Event Infrastructure -> Event Service
D. In the Business Process Choreographer Explorer -> Views tab -> Process Instances -> Events
generated
Answer: A
certification IBM C2180-270 C2180-270
NO.8 An integration developer has configured a BPEL business process for a customer, as shown below:
What behavior will the integration developer observe when executing the flow?
A. It is possible for both Snippet2 and Snippet3 to execute.
B. The execution order of the links entering Snippet2 and Snippet3 has no impact on the process flow.
C. The gateway leading into Snippet5 will cause an error because the navigation behavior is not set
correctly.
D. The gateway leading into Snippet4 will cause an error because the link exiting Snippet2 has no
condition.
Answer: C
IBM examen C2180-270 examen C2180-270 certification C2180-270 C2180-270 C2180-270 examen
NO.9 A client requires that a new BPEL process return a fault message to the requester in case the process
does not complete correctly. The integration developer has added a fault handler to the process to catch
all exceptions. How should the integration developer return the fault message?
A. Use a throw activity of a business fault.
B. Use a reply activity using a standard fault.
C. Use a reply activity using a business fault defined in the interface.
D. Use a rethrow activity in the fault handler on the process scope using a fault defined in the interface.
Answer: C
IBM examen certification C2180-270 C2180-270 C2180-270 C2180-270 C2180-270
NO.10 An integration developer has configured a BPEL business process for a customer, as shown below:
What should the integration developer consider when implementing this flow?
A. An Otherwise element must be added to the Choice activity.
B. A Timeout element must be added to the ReceiveChoice activity.
C. It is possible for Snippet1 and Snippet2 to run concurrently in the same instance of the process.
D. If Snippet1 is invoked in an instance of the process, that instance will not receive messages sent to the
Service2 interface.
Answer: D
IBM examen C2180-270 C2180-270 C2180-270
Pass4Test peut vous fournir un raccourci à passer le test IBM C2180-270: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test IBM C2180-270. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.
没有评论:
发表评论