Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test IBM 000-129.
Code d'Examen: 000-129
Nom d'Examen: IBM (IBM i 7.1 Administration)
Questions et réponses: 82 Q&As
Selon les feedbacks offerts par les candidats, c'est facile à réussir le test IBM 000-129 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification IBM 000-129. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test IBM 000-129, vous aurez une meilleure préparation avec l'aide de Pass4Test.
Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification IBM 000-129, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.
Le programme de formation IBM 000-129 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test IBM 000-129, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat IBM 000-129. Vous aurez une space plus grande à se développer.
L'importance de la position de Certificat IBM 000-129 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen IBM 000-129 par votre première fois.
000-129 Démo gratuit à télécharger: http://www.pass4test.fr/000-129.html
NO.1 An administrator needs to restore a physical file DATALIB/SMALLFILE from a Save 21 backup of
library DATALIB. DATALIB has several hundred large database files plus other objects.
The administrator has the job log and output from the last full save of DATALIB.
What should the administrator do to restore SMALLFILE in the shortest time?
A. Run the RST command for object /QSYS.LIB/DATALIB.LIB/SMALLFILE.FILE
B. Delete SMALLFILE, run RSTLIB specifying *NEW objects, and specify library DATALIB as the
starting library.
C. Run RSTLIB for library DATALIB specifying the position parameter for SMALLFILEin library
DATALIB from the output of the save.
D. Run RSTOBJ for DATALIB/SMALLFILEspecifying the position and sequence number for
SMALLFILEin library DATALIB from the output of the save.
Answer: D
IBM examen 000-129 000-129 000-129
NO.2 A batch job runs daily in the QBATCH subsystem with a run priority of 50. The job normally
takes
an hour to complete and no other batch jobs run during this time.
The administrator needs to reduce the run time and requests the run priority be lowered to 40.
However1 after the change, run time does not decrease.
What is the likely reason that the run time did not decrease?
A. The run priority applies to only interactive jobs.
B. D82 Symmetric Multiprocessing has not been installed.
C. The run priority represents only the relative importance of the job.
D. The system value QPFRADJ (Performance Adjustment) is set to No adjustment.
Answer: C
IBM 000-129 examen 000-129 examen certification 000-129
NO.3 Which graphical tool will help identity additional details about activity on the system, to
isolate the
root cause of performance problems?
A. PEX
B. iDoctor
C. Performance Monitor
D. Communications Trace
Answer: B
certification IBM 000-129 certification 000-129 000-129 examen certification 000-129 000-129 examen
NO.4 Due to an application problem, management has requested the IPL of a partition running IBM
i
7.1. The administrator initiates the IPL, and during the restart phase notices the IPL is running in
manual mode even though the HMC partition settings indicate B NORMAL.
Why is the IPL running in manual mode?
A. The PWRDWNSYS command restart parameter is set to *MANUAL.
B. Manual is the default IPL mode when there is a console problem.
C. The QIPLTYPE system value is set to Attended IPL, Console in debug mode.
D. Manual is the default IPL mode when the previous system end indicator is abnormal.
Answer: C
certification IBM 000-129 examen certification 000-129 000-129 examen
NO.5 A company has just purchased a new POWER7 server running IBM i 7.1 to replace an older
system running V5R4M5. Due to a mistake by a programmer on the V5R4 system, data was
accidently deleted. To recover, the administrator backs up the deleted data to virtual tape on the
7.1 server and attempts to restore it on the V5R4 server. The restore on the V5R4 server fails with
a message stating the data was saved from a more recent release of the operating system.
Which option will solve this problem?
A. Save the data to physical media.
B. Set the target release parameter to V5R4M0 when saving the data.
C. ETP the virtual tape image catalog from the 7.1 server using binary mode.
D. Use the target release parameter *RECOVER and the access path parameter set to VSR4MO.
Answer: B
certification IBM 000-129 000-129 000-129
NO.6 Journaling of a large library is running on SYSTEMA and the journal is system managed.
Remote
journaling to
SYSTEMB has been configured. Due to a communications problem between SYSTEMA and
SYSTEMB, remote journaling is not working and cannot be quickly restarted.
Disk utilization on SYSTEMA is increasing rapidly. To reduce disk utilization the administrator tries
to delete journal receivers on SYSTEMA. Attempts fail and the following message displays:
CPF705F: Receiver not replicated to 1 remote journals.
What must the administrator do to delete journal receivers on SYSTEMA?
A. Delete and recreate only the journal, and then delete the receivers.
B. Stop journaling, as this must be ended first, and then delete the receivers.
C. Use the DLTJRNRCV command and change the delete option parameter to ignore target
receivers.
D. Use the CHGJRN command to change the Manage Receivers parameter to allow user
management of journal receivers and then delete the receivers.
Answer: C
IBM 000-129 000-129 examen
NO.7 What are the key benefits provided by database journaling?
A. Can send updates concurrently to a second system
Can back out incomplete transactions
Can reduce system I/O workload
B. Can reduce application complexity
Can back out incomplete transactions
Can maintain database integrity in the case of an unexpected outage
C. Can send updates concurrently to a second system Can increase performance
Can maintain database integrity in the case of an unexpected outage
D. Can send updates concurrently to a second system
Can back out incomplete transactions and commitment control
Can maintain database integrity in the case of an unexpected outage
Answer: D
IBM examen certification 000-129 certification 000-129 000-129
NO.8 An administrator has been asked to update an IBM i 7.1 system to the most current
Technology
Refresh available from IBM. Which method is the most appropriate to achieve the update?
A. Perform a D-mode IPL using the Technology Group PTF package SF99707.
B. Perform a slip install using the most current 1_Base_01 resave media available.
C. Perform a scratch install using the most current 1_Base_01 resave media available.
D. Perform an install of the Technology Group PTF package SF99707 using the GO PTF menu.
Answer: D
IBM examen 000-129 000-129 examen 000-129 000-129
NO.9 The threshold limit has been reached for the system ASP on a system running IBM i 7.1 . There
are some disk units configured to a user ASP available. Business continuing policy prevents the
administrator from stopping the system.
How could the system administrator correct the storage problem in the system ASP?
A. Increase the ASP threshold above the currently utilized storage.
B. Concurrently remove available disk units from user ASP using the Remove units from
configuration SST option and add them to system ASP.
C. Switch to the backup system using an HA solution and restart the original system to DST.
Remove the available disk units from user ASP and add them to system ASP.
D. Initiate a control panel function 21 to activate DST on the system console for the affected
partition. Use the DST feature to compress the parity stripe to increase available storage.
Answer: B
certification IBM certification 000-129 certification 000-129 certification 000-129
NO.10 A disaster recovery test is being performed, using backups from a production system. The
backup
process is as follows:
Full system save, using GO SAVE Option 21, for weekly backup
SAVCHGOBJ LIB(*ALL) is used for daily library backup, in addition to DLO and IFS saves
The disaster recovery test is at the point where libraries are ready to be restored
Which pair of actions will restore the libraries to the most recent save point, in the minimum
amount of time?
A. Use RSTLIB(*NONSYS) to restore all libraries and object from the SAVE 21 weekly save. For
each daily tape, run a RSTLIB for each library saved by SAVCHGOBJ.
B. Use RSTLIB(*NONSYS) to restore all libraries and object from the SAVE 21 weekly save. Then
run a RSTOBJ for each library saved by SAVCHGOBJ on the most recent daily tape.
C. Run RSTOBJ for each library saved by SAVCHGOBJ on the most recent daily tape.
Then run RSTLIB(*NONSYS) OPTION(*NEW) to restore the remaining libraries and objects from
the SAVE 21 weekly save.
D. For each daily tape, run RSTOBJ for each library saved by SAVCHGOBJ on the daily tapes.
Then run RSTOBJ(*NONSYS) OPTION(*NEW) to restore the remaining libraries and objects from
the SAVE 21 weekly save.
Answer: B
IBM examen 000-129 examen 000-129 certification 000-129 certification 000-129
Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.
没有评论:
发表评论