Lotus meilleur examen 190-955 190-841 190-510, questions et réponses

La Q&A Lotus 190-955 de Pass4Test est liée bien avec le test réel de Lotus 190-955. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Lotus 190-955 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

Le Certificat de Lotus 190-841 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Lotus 190-841, c'est-à-dire avoir une grande fortune. Le Certificat Lotus 190-841 peut bien tester des connaissances professionnelles IT. La Q&A Lotus 190-841 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Choisir le Pass4Test peut vous aider à réussir 100% le test Lotus 190-510 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.

Code d'Examen: 190-955
Nom d'Examen: Lotus (IBM WebSphere Portal 6.1 Deployment and Administration)
Questions et réponses: 158 Q&As

Code d'Examen: 190-841
Nom d'Examen: Lotus (IBM Lotus Notes Domino 8 Implementing and Administering Security)
Questions et réponses: 112 Q&As

Code d'Examen: 190-510
Nom d'Examen: Lotus (Domino R5 Designer Fundamentals)
Questions et réponses: 105 Q&As

Si vous êtes intéressé par l'outil formation Lotus 190-955 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Lotus 190-841 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Lotus 190-841 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Lotus 190-841 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

190-955 Démo gratuit à télécharger: http://www.pass4test.fr/190-955.html

NO.1 When an administrator uses an xml export from a complete page and changes the create-oids to "true",
which of the following occurs when the xml file is imported again?
A.All portlets are deleted from the page and the layout is created again
B.XMLaccess commands will issue an an error because it cannot find the page
C.All portlets are deleted from the page and the layout is created again unless the administrator has also
set preserve-old-layout="true"
D.All portlets that are referenced in the xml file and are already on the page, remain untouched, additional
portlets are put on the page in their place from the portlet catalog
Answer: C

certification Lotus   certification 190-955   190-955   190-955 examen

NO.2 In order to implement a highly available END-TO-END security solution for a production portal
environment, which of the following sets of components would be most useful?
A.Netegrity SiteMinder, Credentials vault, Dynamic Cache, Deployment Manager hot standby
B.Tivoli Access Manager, Load Balancing Edge component, Portal Cluster, LDAP server cluster
C.Tivoli Access Manager, Portal Cluster, Credential vault, Network-Attached Storage devices
D.Tivoli Access Manager, Netegrity SiteMinder, WebSphere Information Integrator, LDAP server cluster
Answer: B

Lotus examen   190-955 examen   190-955 examen   190-955 examen

NO.3 Jeremy has connected his WebSphere Portal instance to an IBM Tivoli Directory Server repository for
authentication purposes. However, while the majority of users are able to authenticate, certain users are
not. Jeremy confirmed that the users are attempting to authenticate with the correct user id and password.
What is the most likely cause of this issue?
A.The users should log in with an email address instead of a user id.
B.The location of the accounts in the LDAP tree is outside the scope of where Portal looks for accounts.
C.The accounts are not members of the All Authenticated Portal Users group.
D.The LDAP bind password is configured incorrectly.
Answer: B

certification Lotus   certification 190-955   certification 190-955   190-955   190-955 examen

NO.4 Which of the following statements correctly describes how WebSphere Portal's functionality is
implemented on the WebSphere Application Server?
A.WebSphere Portal is deployed as a stand-alone Java application using WebSphere Application Server
client libraries.
B.WebSphere Portal is deployed as an Enterprise Application on the WebSphere Application Server
C.WebSphere Portal is a stand-alone web server framework and is not related to WebSphere Application
Server
D.WebSphere Portal is deployed as a portlet to WebSphere Application Server's Portlet Container
Answer: B

Lotus examen   190-955 examen   190-955 examen

NO.5 Matt is creating a Portal solution for a client who mentions that they would like to expose information
from their mainframe system to Web users. What should Matt do?
A.Ignore the question because WebSphere Portal does not support mainframe systems
B.Agree with the requirement because WebSphere Portal supports mainframe systems such as System Z
C.Proceed cautiously because mainframe integration could affect the performance of other portal
applications
D.Explain that portal is an interface service in his larger Service Oriented Architecture design and should
be used to expose data from backend systems such as the mainframe
Answer: D

Lotus examen   certification 190-955   certification 190-955   190-955   certification 190-955

NO.6 Composite applications can be defined by which of the following?
A.A group of applications that share a common theme
B.A list of applications available to the personalization server
C.A cluster of WebSphere Portal servers that share a common database
D.A compiled set of components that address a particular business need
Answer: D

certification Lotus   certification 190-955   190-955 examen   certification 190-955   190-955

NO.7 Your WebSphere Portal environment is supposed to access a remote LDAP directory that is supported
by another group in your organization. However, they will not allow changes to be made to their LDAP
directory structure. Portal has requirements that cannot be met by their structure. Which of the following is
the best possible solution?
A.Do not utilize the remote LDAP directory and create a local Cloudscape directory
B.Utilize the remote LDAP directory and disable all features that require customization
C.Utilize the remote LDAP directory and create a look-aside database for additional profile information
D.Copy the remote LDAP directory into a local LDAP source and make the necessary customization
needed to utilize the local source
Answer: C

certification Lotus   190-955 examen   190-955 examen   certification 190-955   190-955 examen

NO.8 Members of a WebSphere Portal cluster exist on multiple physical machines to distribute the workload
of a single logical WebSphere Portal image. What is this called?
A.Vertical scaling
B.Horizontal scaling
C.Multi-machine design
D.HTTP server separation
Answer: B

Lotus examen   190-955 examen   certification 190-955

Le meilleur matériel de formation examen Lotus 190-835

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Lotus 190-835 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Lotus 190-835.

Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Lotus 190-835, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Lotus 190-835. Vous aurez une space plus grande à se développer.

Code d'Examen: 190-835
Nom d'Examen: Lotus (IBM Lotus Notes Domino 8 App Development Intermediate Skills)
Questions et réponses: 108 Q&As

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test Lotus 190-835 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Le test Certificat Lotus 190-835 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Lotus 190-835. Vous allez prendre toutes essences du test Lotus 190-835 dans une courte terme.

Le test Certification Lotus 190-835 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Lotus 190-835. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Lotus 190-835.

190-835 Démo gratuit à télécharger: http://www.pass4test.fr/190-835.html

NO.1 Andre has hidden the design of a database. Which one of the following describes how to re-sign the
database with a different ID?
A. Once the design of a database has been hidden, the database cannot be re-signed.
B. Deselect the 'Hide formulas and LotusScript' database property and re-sign the database.
C. Make a copy of the database without the ACL. This will unhide the design, and allow re-signing.
D. Sign the design template using the new ID, and replace the design of the database with this template.
Answer: D

certification Lotus   certification 190-835   190-835 examen   190-835

NO.2 Jason coded and saved a scheduled Java server agent that should execute on ServerX. The agent
does not run at all, even though Jason signed it with his Notes ID. Given that the Agent Manager is
running on the server, which one of the following should Jason check first to diagnose the problem?
A. Check whether an Anonymous user is allowed to run agents on the server.
B. Check the Agent security tab to make sure that "Run as Web user" is selected.
C. Check whether Jason is in either the "restricted" or "unrestricted" agents list on the server.
D. Check whether Jason is in the "Database administrators" list on the server document.
Answer: C

Lotus   190-835 examen   certification 190-835   190-835 examen   190-835 examen

NO.3 Daniel is designing a Suggestions application and wants to minimize replication conflicts. Which one of
the following will accomplish this?
A. Assign users Editor access to the database. Create a form of type Document and name the form
'Suggestion'. Create a form of type Comment and name the form'Comments'.Use Authors fields on both
forms.
B. Assign users Author access to the database. Create a form of type Document and name the form
'Suggestion'. Create a form of type Comment and name the form'Comments'.Use Readers fields on both
forms.
C. Assign users Author access to the database. Create a form of type Document and name the form
'Suggestion'. Create a form of type Response and name the form'Comments'.Use Authors fields on both
forms.
D. Assign users Editor access to the database. Create a form of type Document and name the form
'Suggestion'. Create a form of type Response and name the form'Comments'.Use Readers fields on both
forms.
Answer: C

Lotus   190-835   190-835   190-835   190-835 examen   190-835

NO.4 If possible, Shannon would like to take advantage of the features of Composite Applications within a
single Notes database. She has no need to access data from any other application. Can she deploy a
Composite Application that includes the composite application definitions and the NSF component all
within a single NSF?
A. Yes. She can store the Composite Application definitions and the NSF component in the same
database. Whenspecifying the Notes URL of the Component Properties, Shannon should designate the
url as notes:///_self
B. Yes. She can store the Composite Application definitions and the NSF component in the same
database. Whenspecifying the Notes URL of the Component Properties, Shannon should designate the
url as notes:///0000000000000000
C. No, but although the Composite Application definitions and the NSF component cannot be stored in
the samedatabase, they can be referenced from the same database. From this composite application,
she can then refer to otherNotes databases and NSF components using Notes URLs.
D. No. Composite Applications are intended to leverage pieces of separate applications to combine in a
single context.There would be no benefit to be gained from placing the overhead of Composite
Applications on a single Notesapplication.
Answer: B

certification Lotus   190-835   certification 190-835   190-835 examen

NO.5 The disk space on the database properties Info tab of Len's database shows 4GB of space allocated
to the database, with only about 70% used. The database includes many file attachments. What can Len
do to minimize the storage consumed by his database?
A. On the Advanced tab of database properties, select "Use LZ1 compression for attachments". Click the
Compact button on the Info tab.
B. On the Advanced tab of database properties, select "Use LZ1 compression for attachments", and
select "Allow compression of database design". Click the Compact button on the Info tab.
C. On the Advanced tab of database properties, select "Use LZ1 compression for attachments", and
select "Allow compression of database design". From the server console or from the Domino
Administrator client run a copy-style compact on the database.
D. On the Advanced tab of database properties, select "Use LZ1 compression for attachments", select
"Allow compression of database design", and ensure that "Allow compression of database documents" is
selected. From the server console or from the Domino Administrator client run a copy-style compact on
the database.
Answer: C

Lotus   190-835   190-835

NO.6 The graphics department has sent Horacio a JPEG image to be used as the icon for his new database.
What should Horacio do so that this image appears as the database icon?
A. Use a graphics program to convert the image to a 16x16 pixel GIF. Copy the GIF to the Clipboard.
Open the database in Designer, and from the Design pane, select Other > Database Resources.
Double-click Icon and click Paste.
B. Use a graphics program to convert the image to a 32x32 pixel bitmap. Copy the bitmap to the
Clipboard. Open the database in Designer, and from the Design pane, select Other > Database
Resources. Double-click Icon and click Paste.
C. Use a graphics program to convert the image to a 32x32 pixel GIF. Open the database in Designer,
and from the Design pane, select Shared Resources > Images. Click "New Image Resource" and select
the filename of the image. From the Design pane, select Other > Database Resources. Double-click Icon,
click "Select from Image Resource" and select the image.
D. Use a graphics program to convert the image to a 16x16 or larger square image. Open the database in
Designer, and from the Design pane, select Shared Resources > Images. Click "New Image Resource"
and select the filename of the image. From the Design pane, select Other > Database Resources.
Double-click Icon, click "Select from Image Resource" and select the image.
Answer: B

certification Lotus   190-835 examen   190-835 examen   190-835   certification 190-835   190-835

NO.7 Donna would like to examine the actual WSDL for the Wiring Properties/Action Definition of her
CompositeApplication. How can she do this?
A. Open the Domino application using Domino Designer. Select Composite Applications > Wiring
Properties. Double-click on the desired Wiring Properties.
B. Open the Composite Application using Composite Designer. Select Wiring Properties. Select the
desired Wiring Properties and click the Open File button.
C. Open the Domino application using Domino Designer. Select Composite Applications > Wiring
Properties. Select the desired Wiring Properties, and click the Open With... button, and select a text editor
(such as Windows Notepad).
D. Open the Composite Application using Composite Designer. Select Wiring Properties. Select the
desired Wiring Properties and click the Export WSDL button to save the WSDL as an external file. Open
the saved file using a text editor.
Answer: C

Lotus examen   190-835   190-835 examen

NO.8 Cindy locked a design element and left on vacation. The design element has to be changed. Who can
change it?
A. Only Cindy
B. Anyone with Designer access or higher
C. Only those with Manager access
D. Anyone with Editor access or higher
Answer: C

certification Lotus   certification 190-835   190-835   certification 190-835   190-835

NO.9 Susan creates a sales reporting database that has information downloaded daily from a host
application.
1. Each document contains the monthly sales for 10,000 products, entered by part number.
2. Because Susan gets a complete set of data every day, her agent deletes all of the documents in
the database.
3. New documents with the same part numbers are created so they are identical in the views.
4. The application is used globally and resides on many servers.
Which one of the following describes a problem this will cause?
A. There will be a heavy replication burden.
B. The maximum view index size will be exceeded in less than a year.
C. The users will not be able to easily find the same information from day to day.
D. There will be replication conflicts because many of the documents will be exactly the same.
Answer: A

Lotus   certification 190-835   190-835 examen

NO.10 Roselia changed the "By Status" view in her workflow database. She selected the "Don't show empty
categories" row property for the view. Why would she have done this?
A. Database performance needs to be improved. Roselia has set this property so that the view index will
be smaller, allowing for faster indexing and faster opening of the view.
B. Document access is restricted with Readers fields. Roselia needs to ensure that each Status category
only displays when the category contains at least one document to which the user has access.
C. There are 5 different values possible for the Status field, but often all documents have a Status of
"Closed". Roselia wants to show each category only when there is at least one request with that Status.
D. Many new requests entered into this database every week. Roselia is worried about the database size.
She has set this property to reduce the size of the index of the main view of the database to save disk
space.
Answer: B

Lotus examen   certification 190-835   190-835   190-835 examen

NO.11 Jason supports a suite of Notes applications related to the sales process. For a user to see a list of
product alerts pertaining to a given customer's order, the user will currently open a Customer document
from a view, then open an Order document from an embedded view, and then select a line item from the
order and click a button to open a list of any product alerts. How could the user experience change if
Jason were to offer his users a Composite Application?
A. Composite Applications are used to wire Notes and non-Notes applications. Since Jason's applications
are entirely Notes-based, Composite Applications are not applicable.
B. The user could select a Customer in one pane, see a list of orders display in a second pane, and select
an order to see the line items display in a 3rd pane. This could all be in a single context within the Notes
client.
C. The user could hover the mouse over a Customer in one pane, see a list of orders display in a second
pane, and hover the mouse over an order to see the line items display in a 3rd pane. This could all be in a
single context within the Notes client.
D. Composite Applications allow the use of AJAX features for a richer user experience and
subjectively-faster data transfers. Using OnMouseOver and other JavaScript events enables
context-sensitive popup displays. This results in a more Web-like interface from within the Notes client.
Answer: B

certification Lotus   certification 190-835   190-835   190-835 examen

NO.12 Greg has created a form with several fields that get their data from an external relational database
system based on a key field. DECS is installed. Which one of the following must he have done to achieve
this functionality?
A. Created an embedded RDBMS link
B. Created a data connection resource
C. Created an ODBC connection resource
D. Manually imported the data from the relational database
Answer: B

Lotus   190-835   190-835   190-835

NO.13 Norah wants to provide navigation on the left side of the screen and content on the right side. The
navigation should have links to views, with some links inside collapsed folders. It should also have links
for actions, using custom icons for the links. Can this be done?
A. No. Notes navigators are no longer supported, and Pages, Frames, and Framesets are for Web
applications.
B. No. Most of this can be built using outlines, pages, frames, and framesets. But icon graphics must be
selected from those provided in the notes\data\domino\icons folder.
C. Yes. Create an outline with links for views and actions. Custom icons can be used. Put the outline on a
page. Put the page in the left-hand frame of a frameset. The right-hand frame will hold the content.
D. Yes. Create a Notes navigator object with an image bitmap for the navigation, placing an embedded
editor on the right for the content. Create clickable areas on the navigator image to link to views and
actions.
Answer: C

Lotus   190-835   certification 190-835   190-835 examen   190-835

NO.14 Jim created a discussion database with documents and response documents. When changes are
made to a response document, Jim wants to update the parent document. Which one of the following
system fields in the response document indicates the associated parent document?
A. $Ref
B. $Doc
C. $ParentDoc
D. $ParentRef
Answer: A

Lotus   190-835   190-835

NO.15 Felix has been receiving a number of support calls from users who have customized the Monthly
Sales view, reordering and resizing columns and setting color options to the point where the view is hard
to use. What can Felix do to prevent these problems in the future?
A. Deselect the "Allow customizations" option on the Info tab of the view properties.
B. Deselect the "Editable column" option on the column properties for each column that needs to retain its
formatting.
C. Deselect the "Resizable" option on the column properties for each column that needs to retain its
formatting, and delete the hidden columns that have the "Use value as color" option selected.
D. Ask the Notes administrators to push a profile to the users to lock the "Disable View updates as a
background task" as selected, and the "Retain View column sorting" as deselected in User Preferences.
Answer: A

Lotus   certification 190-835   190-835   190-835
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.

NO.16 Marie's Windows PC has recently been upgraded to use Notes 8 Standard edition. She is preparing to
develop herfirst Composite Applications. Marie notices that Eclipse is not listed among the applications on
her PC. What stepsshould Marie follow so that Eclipse is properly installed and configured for use with her
Notes environment?
A. Run the Notes setup program and enable the options for "Eclipse runtime" and "Eclipse Developer
tools".
B. Marie should back up her files, uninstall Notes, and then install Notes 8 Basic edition. Eclipse will be
integratedautomatically.
C. There is nothing Marie needs to do. Eclipse was automatically integrated into her Notes environment
when Notes 8 Standard edition was installed.
D. Marie should back up her files, uninstall Notes, and then install Notes 8 Basic edition. During the install
process,enable the options for "Eclipse runtime" and "Eclipse Developer tools".
Answer: C

Lotus   190-835   190-835   190-835 examen   190-835

NO.17 Susan has enabled document locking on her Lotus Domino server. She wants to lock a document
using an action button formula in a document that is currently being read. Which one of the following
formulas will accomplish this?
A. @DocLock([LOCK])
B. @DocLock([LOCKINGENABLED])
C. @Command( [EditDocument] ); @DocLock([LOCK])
D. @Command( [EditDocument] ); @Lock(@ThisDoc)
Answer: A

Lotus   190-835   190-835 examen   190-835 examen   190-835

NO.18 Which one of the following contains data types stored as summary data by default?
A. Text, number, date/time, reader names
B. Text, text lists, rich text
C. All data types are stored in the summary buffer
D. Rich text, file attachments, embedded OLE objects
Answer: A

Lotus examen   190-835   190-835

NO.19 The "Job Opportunities" database is accessed regularly by many employees at Gayla's company. The
database hasbeen replicated to local servers at each of the company's 20 locations. Although Gayla has
created a full-text index (including the indexing of attachments) on a hub server and verified that the hub
replicates to all of the distributedservers, her users complain that searches are very slow, and they are
unable to use the "Fill out example form" search feature that they CAN use in some other databases.
What could be done to fix this problem?
A. Gayla needs to click the Create index button on the Full Text tab of the database Properties on each of
the replica databases.
B. Gayla needs to select the "Replicate view search indices" parameter on the database Properties
Advanced tab on eachof the replica databases.
C. The Notes administrator needs to increase the number of minutes specified by the
ReplicationTimeLimit parameter in the hub server's Notes.ini file.
D. Gayla needs to select the "Replicate view search indices" parameter on the database Properties
Advanced tab on the
database on the hub server.
Answer: A

Lotus   certification 190-835   certification 190-835

NO.20 Jim is designing a new application that will be deployed to multiple sites using database replicas.
Which one of the following will he be able to replicate?
A. View indexes
B. Database launch properties
C. Full text indexes
D. Database file names
Answer: B

Lotus   190-835   190-835   190-835 examen

Vous aurez une assurance 100% à réussir le test Lotus 190-835 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Pass4Test offre une formation sur Lotus 190-829 matériaux examen

Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test 190-829 est lequel très important dans les tests de Certification Lotus. Pour être qualifié de Lotus, on doit obtenir le passport de test Lotus 190-829.

Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Lotus 190-829, et aussi une meilleure assurance du succès du test 190-829. Vous choisissez Pass4Test, vous choisissez le succès.

Code d'Examen: 190-829
Nom d'Examen: Lotus (IBM WebSphere Protal V6 Application Development)
Questions et réponses: 104 Q&As

Pass4Test vous promet de vous aider à passer le test Lotus 190-829, vous pouvez télécharger maintenant les Q&As partielles de test Lotus 190-829 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Le programme de formation Lotus 190-829 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

190-829 Démo gratuit à télécharger: http://www.pass4test.fr/190-829.html

NO.1 Bethany is creating a custom mail portlet service for use by several portlets. She has defined the
interface, written the code for her services, and created and installed the service's .jar file on her portal
server. Before she can code her portlets to access the service, what final step must be taken?
A. Register the service
B. Extend the PortletService interface
C. Specify action processing for the service
D. Modify the credential vault slot for the service user role
Answer: A

Lotus   190-829   190-829 examen

NO.2 Hallie is developing a custom theme for her portal project. What is unique about the style sheets
associated with a WebSphere Portal theme?
A. Style sheets are saved as JSPs
B. CSS files must be deployed as portlet WARs
C. All styles must be prepended with "portal-theme"
D. The default css must begin with a portal style class declaration
Answer: A

Lotus   190-829   190-829 examen   certification 190-829   certification 190-829

NO.3 Mary is developing a composite application, in which one of the components requires access to a
back-end system.
Which of the following is the WebSphere Portal mechanism for managing user access to back end
systems without having to continuously provide new credentials?
A. Siteminder
B. Credential Vault Service
C. Tivoli Application Security
D. WEBSeal Authentication Proxy
Answer: B

certification Lotus   190-829   190-829   190-829
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.

NO.4 Inez is developing a composite application and wishes to leverage the related public interfaces
available to her as a developer. Which of the following interfaces contains a method to provide supported
parameters during creation of a business component?
A. Lifecycle
B. Membership
C. Templatable
D. DisplayInfo
Answer: A

Lotus   190-829   certification 190-829

NO.5 A developer needs to export a portlet from a portal installation so that a collaborative world-wide team
can test it. What is the BEST out-of-box option that the developer can choose to export this Portlet?
A. Use Export XML Portlet
B. Use Upload and Export Portlet C. Use Manage Pages Portlet
D. Copy and Paste the Portlet across machines
Answer: C

Lotus   190-829   190-829

NO.6 Tony is just beginning to work with a Faces portlet in RAD. Since RAD automatically switched to the
Web Perspective when he started the project, where can he find Enhanced Faces Components (such as
a Data Table) to 'drag and drop" onto the page editor?
A. In the Palette
B. In the Quick Edit view
C. In the Page Data view
D. In the Project Explorer
Answer: A

Lotus   190-829   190-829 examen   190-829 examen

NO.7 Xavier is working with a IBM Workplace Web Content Management application, extending it with the
API. Which item is the primary focus of the API?
A. The library
B. The workspace
C. The property broker
D. The document manager component
Answer: B

Lotus   190-829 examen   190-829 examen   190-829 examen

NO.8 Will is developing a business process application, and is at the point where he is initiating the process
instance. He has used a JNDI lookup to obtain a reference to the process server remote EJB interface.
Next he codes the portlet to start the process with an input message. Once the process starts, what is
returned to the caller by the operation?
A. The process-instance name
B. The process template name
C. The object ID of the new process instance
D. A reference to the BusinessProcess session bean
Answer: C

certification Lotus   190-829 examen   190-829 examen   190-829

NO.9 Which of the following actions is required in order to launch the Wireless Markup Language (WML)
device emulator when using WebSphere Portal?
A. Specify Wireless Markup Language the markup in portlet.xml file
B. Select "Enable Wireless Markup Language Setting" option
C. Enable Transcoding
D. Enable Wireless Markup Language Markup
Answer: C

Lotus   190-829   190-829   190-829 examen   certification 190-829

NO.10 Nell is using RAD 7 and would like to minimize the startup time of her local WebSphere Portal 6 server.
Which approach should she take to accomplish this?
A. Deselect all portlets that do not need to be started for testing
B. Enable "Optimize server for testing and developing" in the servers view
C. Modify the batch file that starts WebSphere Portal to include -Xquickstart
D. Modify the JAVA_Size environment variable for the development machine
Answer: B

Lotus   certification 190-829   190-829   190-829

NO.11 The Personalization resource wizard in Rational Application Developer is used to generate the
content spot classes and resource collection classes. If the content spot and resource collection will be
used by multiple applications, then those classes should be:
A. Deployed together with the related portlets in the portlet application WAR file.
B. Placed in the WebSphere Application Server shared library.
C. Placed directly in the pzn_root/pzn/v6.0/lib directory.
D. Uploaded using the Personalization interface.
Answer: B

Lotus   190-829   190-829 examen   190-829   certification 190-829

NO.12 Tracy is building a composite application for WebSphere Portal 6. What are the two fundamental
aspects of composite applications?
A. Libraries and instances
B. Applications and workflow
C. Templates and applications
D. Templates and business components
Answer: C

Lotus examen   190-829 examen   190-829 examen

NO.13 A team of developers must improve Portal layout and navigational features. What tool in Rational
Application Developer V7.0 should they use?
A. Portlet Designer
B. Page Designer
C. Portal Designer
D. Customization Designer
Answer: C

certification Lotus   certification 190-829   certification 190-829

NO.14 Which of the following is valid about the IBM Workplace Solutions Catalog?
A. Portlet technology previews developed outside of IBM may be made available through the IBM
Workplace Solutions Catalog.
B. Developers need to download the Rational Application Developer from IBM the Workplace Solutions
Catalog.
C. All portlets on the IBM Workplace Solutions Catalog are available as open source so developers can
use the code as a basis for new portlets.
D. Portlets created by vendors like are available through the IBM Workplace Solutions Catalog.
Answer: D

Lotus   certification 190-829   190-829   190-829 examen   190-829 examen   certification 190-829

NO.15 Andy is preparing to install Rational Application Developer 7. What level of authority must his ID have
on a Microsoft Windows installation?
A. Root access
B. Administrator
C. Read and Edit
D. Modify and Read
Answer: B

Lotus examen   190-829 examen   190-829   190-829

NO.16 Abigail is a developer working with the theme policy for her corporate theme for WebSphere Portal 6.
Theme policies are managed by administrators, but she can also use a theme policy in what other type of
design artifact?
A. JSP
B. POJO
C. Java class
D. Ajax requests
Answer: A

Lotus   190-829   190-829 examen   certification 190-829   190-829 examen   190-829

NO.17 Fiona is developing a series of portlets that will eventually work together and exchange data,
providing a more dynamic user experience. What portlet service does WebSphere Portal provide that will
allow her portlets to exchange data?
A. PUMA SPI
B. Property Broker
C. Credential Vault
D. Cooperative Interface
Answer: B

certification Lotus   190-829 examen   190-829   190-829

NO.18 For a web application with multiple Struts portlets, the BEST way to define the initial views of the
individual portlets is to specify them:
A. In the welcome file list in the application's web.xml.
B. In the viewMode.page preferences attributes in the individual portlet.xml.
C. As viewMode properties in the actions section in the individual struts-config.xml.
D. As view attributes in the supports section of the individual portlet.xml.
Answer: B

Lotus   certification 190-829   certification 190-829

NO.19 Ivan is configuring his local development machine with a deployment of WebSphere Portal 6 for
testing. Which list below describes the software that must be installed in order for his portal server to run?
A. WebSphere Application Server, an LDAP v3 server, and IBM DB2
B. WebSphere Application Server, IBM Cloudscape, and Lotus Domino
C. WebSphere Application Server, IBM Cloudscape, and a WebSphere Portal instance
D. WebSphere Application Server, an LDAP v3 server, IBM Cloudscape, and an external HTTP server
Answer: C

certification Lotus   certification 190-829   certification 190-829   190-829

NO.20 For portal business processes that should be processed within portal, what is used to lookup the task
page definition at runtime?
A. Client UI identifier
B. Process Template Name
C. Task instance object identifier (TKIID)
D. Staff activity identifier
Answer: A

certification Lotus   190-829 examen   190-829 examen

L'équipe de Pass4Test rehcerche la Q&A de test certification Lotus 190-829 en visant le test Lotus 190-829. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Lotus 190-829 sans aucune doute.

Meilleur Lotus 190-521 test formation guide

C'est sûr que le Certificat Lotus 190-521 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Lotus 190-521, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Lotus 190-521 peut bien tester la professionnalité de IT.

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Lotus 190-521. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Lotus 190-521.

Les produits de Pass4Test sont préparés pour le test Certification Lotus 190-521, y compris les formations et les informations ciblées au test Lotus 190-521. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Code d'Examen: 190-521
Nom d'Examen: Lotus ( Implementing a Domino R5 Infrastructure)
Questions et réponses: 49 Q&As

Est-ce que vous vous souciez encore de réussir le test Lotus 190-521? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.

190-521 Démo gratuit à télécharger: http://www.pass4test.fr/190-521.html

NO.1 Ann sent a message to Bill but used an incorrect address. She was terminated and her Mail
file was deleted.
Which one of the following describes what happened to the message sent to Bill?
A. It was held in the MAIL.BOX as dead mail.
B. It was returned to Susan as undeliverable.
C. It was forwarded to the mail administrator.
D. It was held in the MAIL.BOX as undelivered mail.
Answer: A

Lotus   190-521   190-521

NO.2 Which one of the following allows a server to become a passthru server?
A. A Passthru document.
B. A Passthru setting in the Server document.
C. A Connection document in the Domino Directory.
D. A Passthru setting in the server's Location document.
Answer: B

certification Lotus   190-521   190-521 examen   190-521

NO.3 The amount of information recorded in the Log file can be modified.
In which one of the following are these logging options set?
A. NAMES.NSF
B. NOTES.INI
C. CONFIG.CFG
D. DESKTOP.DSK
Answer: B

Lotus   190-521   190-521   certification 190-521

NO.4 In order for a Domino system to work, which one of the following must be set up on every
Domino server in the domain?
A. A copy of the Domino Directory.
B. The system's Organization certifier.
C. A replica copy of the Domain Catalog.
D. A replica copy of the Domino Directory.
Answer: D

Lotus examen   certification 190-521   190-521 examen   190-521

NO.5 Janosis a member of both the Bandits and the Administrators groups. The Bandits group is
listed in the server's Not Access Server field. The Administrators group is listed in the
server's Access Server field.
Which one of the following happens when Ove tries to access the server?
A. He is denied access.
B. He is allowed access.
C. Domino does not allow a person to appear in both groups.
D. Access is allowed depending upon the database being queried.
Answer: A

certification Lotus   190-521   certification 190-521   190-521 examen   190-521

NO.6 Ulf set up several server monitoring tasks.
Which one of the following did he NOT set up?
A. EVENT
B. REVIEW
C. COLLECTOR
D. STATISTICS
Answer: B

certification Lotus   190-521 examen   190-521

NO.7 Fred, a system administrator, is implementing a cluster of Domino servers for load
balancing.
Which type of server license should he install?
A. Domino IIS Server
B. Domino Mail Server
C. Domino Cluster Server
D. Domino Enterprise Server
Answer: D

certification Lotus   190-521   certification 190-521   190-521   190-521   190-521
Search the Domino 5 admin help with "Cluster Server".

NO.8 Marcus set up SMTP security using TCP/IP without SSL.
Which one of the following is used to authenticate the SMTP connection?
A. Data encryption
B. Message validation
C. Certificate authentication
D. Name-and-password security
Answer: D

Lotus   certification 190-521   certification 190-521   190-521   certification 190-521   certification 190-521

NO.9 A system administrator is setting up the Directory Catalog for a mobile user. Most of the
setup information is sent from the server to the mobile user.
Which one of the following steps must the mobile user perform?
A. Create a link to the Directory Catalog.
B. Create a Setup Profile name in the Mail file.
C. List the Directory Catalog file in User Preferences.
D. Enter the name of the server upon which the Directory Catalog is located.
Answer: C

Lotus   certification 190-521   190-521

NO.10 Petratried to create a unique user OU but could not do so,
Which one of the following hierarchical OU/O structures would prevent her from doing this?
A. OU1/0
B. /OU2/OU1/0
C. /OU3/OU2/OU1/0
D. /OU4/OU3/OU2/OU1/0
Answer: D

certification Lotus   190-521 examen   190-521   190-521 examen

Le Certificat de Lotus 190-521 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Lotus 190-521, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 190-521 sans aucun éffort, en même temps, le test de Lotus 190-521 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Lotus 190-521 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

Lotus meilleur examen 190-952, questions et réponses

Pour vous laisser savoir mieux que la Q&A Lotus 190-952 produit par Pass4Test est persuadante, le démo de Q&A Lotus 190-952 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Lotus 190-952 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.

Le test certification Lotus 190-952 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Lotus 190-952 puisse augmenter la compétition dans ce marché.

Le programme de formation Lotus 190-952 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Lotus 190-952 à se preuver. Mais le taux du succès et bien bas. Participer le test Lotus 190-952 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Lotus 190-952.

Code d'Examen: 190-952
Nom d'Examen: Lotus (IBM Lotus Notes Domino 8.5 Application Development Fundament)
Questions et réponses: 116 Q&As

190-952 Démo gratuit à télécharger: http://www.pass4test.fr/190-952.html

NO.1 Dora has a view with a column that shows the date and time at which the document was created. She
would like to show just the date and hide the time portion. How can she accomplish this task?
A.In the View Properties window, set the view style to Date/Time and format the date to be mm/dd/yyyy.
B.In the View Properties window, set the view style to Date/Time, and clear the Display Time option.
C.In the Column Properties window, set the column style to Date/Time and format the date to be
mm/dd/yyyy.
D.In the Column Properties window, set the column style to Date/Time, and clear the Display Time option.
Answer: D

Lotus   190-952   190-952   certification 190-952   190-952   190-952 examen

NO.2 Victor has a field that allows the user to enter the list price of a video. What type of field makes sure that
the value of that field is numeric?
A.Number
B.Dollar
C.Currency
D.Text field with @TextToCurrency Input Validation formula
Answer: A

Lotus examen   190-952   190-952 examen

NO.3 Jorge has built a Ticket Tracking application that is accessed using a Web browser. When users
bookmark a document in their browser, the bookmark title should show the date and status of the ticket.
How would Jorge accomplish this task?
A.Use a window title formula of @Text(TicketDate) + " - " + TicketStatus
B.Use a bookmark title formula of @Text(TicketDate) + " - " + TicketStatus
C.Create a $WindowTitle field with a formula of @Text(TicketDate) + " - " + TicketStatus
D.Create a $BrowserTitle field with a formula of @Text(TicketDate) + " - " + TicketStatus
Answer: A

Lotus examen   190-952   190-952

NO.4 Which one of the following can be printed from the Domino Designer IDE?
A.Current selection
B.Alternative language
C.Only LotusScript language
D.Other objects Alternative language
Answer: A

Lotus   190-952   certification 190-952

NO.5 Burt has been asked to create a unique key to identify each rental transaction in the Video Rental
database. What @Function can he use to create this key?
A.@Key
B.@Unique
C.@UniqueKey
D.@RandomKey
Answer: B

Lotus   certification 190-952   190-952   190-952 examen

NO.6 Mark can see every recipe document in the Kitchen Planning application. He can also edit recipes that
include his name in the Owner field. What level of ACL access does he have?
A.Owner
B.Author
C.Editor
D.Manager
Answer: B

Lotus   190-952 examen   190-952   certification 190-952

NO.7 Yuki wants to add a field to her form that allows multiple values to be selected or cleared by clicking
next to the item. What type of field should she use?
A.Text
B.Checkbox
C.Combobox
D.Radio Button
Answer: B

certification Lotus   certification 190-952   190-952   certification 190-952   190-952 examen

NO.8 Oscar has a database that is designed to be used by the Notes client and a Web browser. He's adding
a new view that should only be accessible by people using the Notes client. How can he accomplish this
task?
A.Set the "$HideFrom" design element field to a value of Web.
B.Select Hide design element from Web browsers in the Column Properties window.
C.Select Hide design element from Web browsers in the Design Document properties for the view.
D.Clear Web browsers from the Who can use this view?" ption in the View Properties window.
Answer: C

Lotus examen   190-952 examen   certification 190-952

NO.9 The Open Discussions view of the Brainstorming application should display main documents. The view
should also display all comments that have been submitted in response to the original postings or to other
comments. Gabriela has discovered that all main documents are displaying correctly in this view, but
neither the response documents nor the response to response documents are displaying. What could be
the problem?
A.On the Options tab of the View properties, the Show main documents only option is selected.
B.On the Info tab of the View properties, the Style option is currently set to Standard Outline.
C.On the Info tab of the View properties, the Style option is not currently set to Standard Outline.
D.On the Options tab of the View properties, the Show response documents in a hierarchy option is not
selected.
Answer: D

Lotus   190-952   certification 190-952

NO.10 Jonathan has built a view in the sales.nsf application. Jonathan wants the profit column in the view to
display in currency. Which one of the following should he do?
A.Write the column formula using the @function @Currency.
B.Select currency on the Numbers tab in the Field Properties of the cost field.
C.Select Number as the style on the Advanced tab of the Column Properties window, and Custom as the
Display Format.
D.Open the Column Properties window and click the Advanced tab. Select Number as the style, and
select Currency as the Number Format.
Answer: D

Lotus examen   190-952 examen   190-952 examen   certification 190-952

NO.11 When Nora creates a new document in the Suggestion application, a number of the fields have text
already displayed. But when she tabs to or clicks the field, the text disappears. What design feature has
been used to create this behavior?
A.Field Hint in the Field Properties window
B.Default Value in the Form Properties window
C.Help Description in the Field Properties window
D.Field Assistance in the Field Properties window
Answer: A

certification Lotus   190-952   190-952

NO.12 Tony wants to create a duplicate of the Video application. He wants to keep a version of the data on the
same server as the production application but does not want any new documents or document
modifications to be replicated into his new database after he creates it. Which one of the following should
Tony do to create his archive?
A.Create a new copy of the database.
B.Create a replica copy of the database.
C.Use Microsoft Windows Explorer to create a copy of the database file.
D.Create a replica copy of the database and disable replication on the database properties.
Answer: A

Lotus   190-952   190-952 examen   190-952

NO.13 When Eduardo tried to save a document, he got the following error message:
Incorrect data type for operator or @Function: Text Expected.
Which one of the following did he most likely do to cause this error to happen?
A.He entered text in a number field.
B.He neglected to place a formula in a validation event.
C.He neglected to place a formula in a translation event.
D.He combined a text field and a time field in a formula.
Answer: D

certification Lotus   190-952   190-952

NO.14 Robert does not want Authors in the Video database's ACL to be able to edit certain fields in
documents that they created. Which one of the following can he do to accomplish this task?
A.Set field security options to Must have at least Editor access to use.
B.Use a Readers field on the form to prevent access to existing documents.
C.Use an Authors field on the form to prevent access to existing documents.
D.Create a standard section on the form and put the restricted fields in the section.
Answer: A

Lotus   190-952 examen   190-952   190-952   certification 190-952

NO.15 Anna wants to add a field to her form that allows one or more values to be selected from a scrolling
fixed size field. What type of field should she use?
A.Listbox
B.Keyword
C.Combobox
D.Dialog List
Answer: A

Lotus   190-952   190-952 examen   190-952   190-952

NO.16 When Tony looks at his video due date in the Video Rental database main view, he sees a due date
time of 9 a.m. Bob is in a different time zone, and sees Tony's due date as 11 a.m. What setting causes
the times to be different for Bob and Tony?
A.The Column Properties window has Display Time set to Always show time zone.
B.The View Properties window has Display Time set to Adjust time to local zone.
C.The Column Properties window has Display Time set to Adjust time to local zone.
D.The View Properties window has Display Time set to Show only if zone not local.
Answer: C

certification Lotus   190-952   190-952   certification 190-952   190-952   certification 190-952

NO.17 Brett has written an action button that extends the due date of a video. When the due date has been
recomputed, he would like a pop-up box to display that shows the new due date. What @Function will
give him this functionality?
A.@Prompt
B.@Dialog
C.@Picklist
D.@Messagebox
Answer: A

certification Lotus   190-952   190-952

NO.18 Jamie needs to add a RestrictAccess field on a form in the Purchasing application. Only users with the
[Admin] role should be able to see this field. How should she write the hide/when formula to hide this
field?
A.@Show("[Admin]";@UserRoles)
B.@Elements("[Admin]";@UserRoles)
C.@IsContained("[Admin]";@UserRoles)
D.@IsNotMember("[Admin]";@UserRoles)
Answer: D

Lotus examen   certification 190-952   190-952   190-952

NO.19 Roberto has been asked to modify the Membership view in the Video Rental application. A green check
mark should display in the Approved view column for each document where membership has been
approved.
He set the view column property to Display values as icons, and now he needs to write a column formula.
What is the column formula he needs to use?
A.@If(Approved = "Yes"; 82; 0)
B.@If(Approved = "Yes"; @OpenImageResource("checkmark.gif"); "")
C.@If(Approved = "Yes"; @Icon(82); @Icon(0))
D.@If(Approved = "Yes"; @Column(82); @Column(0))
Answer: A

Lotus   190-952   certification 190-952   190-952 examen   190-952

NO.20 Rita has built an agent that changes documents with an Approved status to a status of Ready To Pay.
When creating a scheduled agent, what are her options for the schedule frequency?
A.Hourly, Daily, Weekly, Monthly, Annually
B.Once, Daily, Weekly, Monthly, Annually, Never
C.On Startup, On Shutdown, Daily, Weekly, Monthly
D.More than once a day, Daily, Weekly, Monthly, Never
Answer: D

Lotus   190-952   190-952   190-952   certification 190-952   certification 190-952

On peut voir que beaucoup de candidats ratent le test Lotus 190-952 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Lotus 190-952 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Lotus 190-952, Pass4Test peut offrir les Q&As des autres test Certification IT.

Le matériel de formation de l'examen de meilleur Lotus 190-803

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Lotus 190-803 juste avec la Q&A de Lotus 190-803 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

Avec la version plus nouvelle de Q&A Lotus 190-803, réussir le test Lotus 190-803 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

Pour réussir le test Lotus 190-803 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Lotus 190-803. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Lotus 190-803 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Code d'Examen: 190-803
Nom d'Examen: Lotus (Using LotusScript in IBM Lotus Domino 8 Applications)
Questions et réponses: 90 Q&As

Le test Lotus 190-803 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test Lotus 190-803. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test Lotus 190-803. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

Bien qu'il ne soit pas facile à réussir le test Lotus 190-803, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Lotus 190-803, mais encore à vous aider d'économiser votre temps.

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Lotus 190-803 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Lotus 190-803 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Lotus 190-803.

190-803 Démo gratuit à télécharger: http://www.pass4test.fr/190-803.html

NO.1 LS2J is a technology that allows you to access Java classes and libraries directly from LotusScript.
Part of this technology is that certain Java data types are mapped directly to LotusScript data types. What
does a Java String map to in LotusScript?
A.String
B.JavaString
C.Array of Bytes
D.Array of Strings
Answer:A

Lotus   190-803   certification 190-803   190-803 examen   190-803 examen

NO.2 Will is creating an archive script which will copy the document object (doc) from the current database
to an Archive database. The name of the archive database is ARCHIVE.NSF and it resides on the
Dunn_Hub/Dunn server. So far, the code he has written is: Dim s As New NotesSession Dim db As
NotesDatabase Set db=s.CurrentDatabase Dim adb As New
NotesDatabase("Dunn_Hub/Dunn","ARCHIVE.NSF") Dim doc As NotesDocument Dim col As
NotesDocumentCollection Set col=db.UnprocessedDocuments Set doc=col.GetFirstDocument do until
doc is nothing ======>MISSING LINE Set doc=col.GetNextDocument(doc) loop Which one of the
following lines of code should be placed on the MISSING LINE to copy the document to the Archive
database?
A.doc.CopyAllItems(doc)
B.doc.CopyToDatabase db
C.doc.CopyToDatabase col
D.doc.CopyToDatabase adb
Answer:D

Lotus   certification 190-803   190-803   190-803 examen

NO.3 Ichiro needs to write an agent to read a comma-delimited ASCII file of data about parts that his
company uses when building computers. The data is from one of the parts suppliers, and includes 10
fields in each record. Ichiro needs to extract the Part Number, Part Description, and Price from each input
record and update his company's Inventory database with the current data. How should Ichiro proceed?
A.Create a user-defined data Type to represent a Part. Write a 'getter' method for each of the 3 fields that
need to be accessed from the data Type.
B.Create a user-defined class to represent the ASCII file. Write a 'getter' method to retrieve each record,
and use the NotesStream.SplitText method to extract the fields.
C.Create a user-defined class to represent the Parts data. Use notesDOMTextNode.SplitText( "," ) to
parse each field into the appropriate member variable.
D.Create a user-defined data Type to represent the structure of the Parts data. Each field of a given input
record can be referenced using the appropriate member variable.
Answer:D

Lotus   190-803   certification 190-803   certification 190-803   certification 190-803   certification 190-803

NO.4 The error message "Error loading USE or USELSX module" can be caused by which of the following?
A.An improperly defined Const value
B.An ODBC connection that cannot be made
C.An attempt to use NotesUIWorkspace in a background scheduled agent
D.A script library that can't be found or needs to be recompiled using "Recompile All LotusScript"
Answer:D

Lotus examen   190-803 examen   190-803 examen   190-803   190-803

NO.5 For agents that run on new and modified documents, newly received mail documents, pasted
documents, or newly modified documents, what method can you use to mark each document as
"processed" to ensure that a document gets processed by the agent only once (unless it's modified,
mailed, or pasted again)?
A.NotesView.UpdateAll
B.NotesDocument.SetProcessed
C.NotesDocumentCollection.Stamp
D.NotesSession.UpdateProcessedDoc
Answer:D

Lotus   190-803 examen   certification 190-803

NO.6 What does the following code do? Dim session As New NotesSession Dim location As String location
= session.GetEnvironmentString("ENVLoc")
A.Gets the value of the Notes.ini variable called "ENVLoc"
B.Gets the value of the Notes registry entry called "ENVLoc"
C.Gets the value of the Notes.ini variable called "$ENVLoc"
D.Gets the value of the DOS environment variable called "ENVLoc"
Answer:C

certification Lotus   certification 190-803   190-803   190-803

NO.7 Pitr has a Notes Rich Text field on his Account Overview document that contains formatted text,
attachments, and images. He would like to use the textual information in that field in a view. What
NotesRichTextItem method could Pitr use to create a new field containing only the text information of the
original field?
A.TextOnly
B.ConvertToText
C.GetUnformattedText
D.RemoveEmbeddedObjects
Answer:C

certification Lotus   190-803 examen   190-803 examen   190-803

NO.8 Neala is using a hidden field on the Request form to store a temporary value for the request status.
Since this field will not be stored, Neala has created it as a Computed for display field. Neala is trying to
use the code below to set the tempStatus field to "Draft" when a new document is created with the
Request form. An error message displays whever a new Request is created. What could be the problem?
Sub Postopen(Source As Notesuidocument) If Source.IsNewDoc Then Call
Source.FieldSetText( "tempStatus", "Draft" ) End If End Sub
A.In order for the FieldSetText method to be used, a field must be editable. Hidden fields are not editable.
B.The Postopen event occurs before the user has input focus, so only back-end methods will work from
this event.
C.In order for the FieldSetText method to be used, a field must be editable. Computed for display fields
are not editable.
D.The Postopen event occurs after the document has opened, but Computed for display fields are not
available for manipulation until after the user has input focus.
Answer:C

Lotus   190-803 examen   190-803   certification 190-803   190-803 examen

NO.9 Given the following piece of code, where "doc" is a NotesDocument: fieldValue =
doc.GetItemValue("Title") Print "This document's title is " & fieldValue(0) Which of the following is a correct
example of using the "Extended class" syntax to replace the example code above?
A.Print "This document's title is " & doc.Title
B.Print "This document's title is " & doc.Title(0)
C.Print "This document's title is " & doc.GetField.Title
D.Print "This document's title is " & doc.GetField.Title(0)
Answer:B

certification Lotus   190-803   190-803   190-803 examen   190-803

NO.10 Avery has been asked to write a web service in his Domino application. The web service will allow an
Oracle application to query the Movie Rental database with a member identification number and receive a
list of all movies the member has rented in the last 30 days. What are the language options available to
Avery for writing this web service?
A.LotusScript and Java
B.LotusScript, but not Java
C.Java, but not LotusScript
D.LotusScript, Java, and @Formula
Answer:A

certification Lotus   190-803 examen   190-803 examen   190-803 examen   190-803

NO.11 Chris has imported a number of documents into a Notes database that contain MIME data. He now
needs to write an agent that will display the type of MIME encoding for the data. What code fragment
below will get the MIME entry and display the encoding type?
A.Set mime = doc.GetAllMIMEEntries Messagebox "Encoding type: " + mime.Encoding
B.Set mime = doc.GetMIMEEntry Messagebox "Encoding type: " + Cstr(mime.Encoding)
C.Set mime = doc.GetFirstItem(mime) Messagebox "Encoding type: " + mime.Encoding
D.Set mime = doc.GetFirstMIMEEntry Messagebox "Encoding type: " + Cstr(mime.Encoding)
Answer:B

certification Lotus   certification 190-803   190-803 examen

NO.12 Aitana is working in the company's Inventory database. She wants to create an array called 'Assembly'
that will be used to reference 10 instances of the Part class. Aitana can create a single instance of the
Part class using code like this: Dim myPart As New Part But she is having a problem creating the
'Assembly' array. What is wrong with the following line of code: Dim Assembly(9) As New Part
A.The New keyword cannot be used to declare an array of object reference variables.
B.'Assembly' is a reserved word in LotusScript, and cannot be used as a variable name.
C.If an array declared as Assembly(9) is to hold 10 elements, Option Base 0 must be used.
D.An array cannot be used to hold multiple Class instances.
Answer:A

Lotus   190-803   certification 190-803   190-803

NO.13 The Salary form needs an AuditHistory field. When documents are changed, Sahir's script must record
the date/time, editor's name, and values of all changed fields before and after the change. The solution
must also be usable in other forms, and must work without modification, even if new fields are added to
the forms. How can Sahir do this?
A.Write Entering event code for each field, recording field values. Write Exiting events to update
AuditHistory if the values change.
B.Write Postopen event code to populate a list with item names and item values as the document is
opened. Write Querysave event code to examine current item values, and update AuditHistory for any
changed items.
C.Write onFocus event code to populate a hidden temporary field with the item values. Write onChange
event code to update the AuditHistory if the field is changed.
D.Write onLoad event code to populate a list with item names and item values as the document is opened.
In the form onExit event, write code to examine current item values and update AuditHistory for any items
that have changed.
Answer:B

Lotus   certification 190-803   190-803   190-803 examen   190-803

NO.14 The NotesStream class is used to read and write which of the following?
A.Files
B.Network sockets
C.Domino server console commands
D.Binary data in NotesRichText fields (like attachments and inline images)
Answer:A

certification Lotus   190-803 examen   190-803   certification 190-803

NO.15 Devin's canonical Notes name is CN=Devin Smith/OU=Accounting/O=ACME. When he clicks an
action button in an email he received, a messagebox appears which includes this text: Devin Smith is
running Notes 7.0 What is the underlying code that produces this message?
A.Dim session As New NotesSession Messagebox session.UserName + " is running " +
session.NotesVersion
B.Dim session As New NotesSession Messagebox session.CommonUserName + " is running " +
session.NotesVersion
C.Dim session As New NotesSession Messagebox session.CommonUserName + " is running " +
session.NotesBuildVersion
D.Dim session As New NotesSession Dim db As NotesDatabase Set db = session.CurrentDatabase
Messagebox db.CommonUserName + " is running " + db.NotesVersion
Answer:B

certification Lotus   certification 190-803   certification 190-803   190-803

NO.16 Vicki has been asked to integrate device data from her company's network monitoring utilities into
Notes documents. The utilities produce data in an XML format. What strategy can Vicki use in her
LotusScript agent to parse the data for import into Notes?
A.Read the data using a NotesStream object,. Parse the XML data using classes derived from the
NotesXMLProcessor class.
B.Rename the XML file using an extension of ".dxl". Read and parse the data using methods of the
NotesDXLImporter class.
C.Rename the XML file using an extension of ".dxl". Insert a DOCTYPE definition pointing to:
'c:\notes\data\xmlschemas/domino_8_0.dtd' Read and parse the data using methods of the
NotesDXLImporter class.
D.LotusScript includes methods to parse the specific DXL format. Since this file is a more generic XML
format, Vicki will need to use a tool such as Excel to convert the XML to a format that can be processed
with COM classes.
Answer:A

Lotus   190-803 examen   190-803   190-803 examen   190-803   certification 190-803

NO.17 Which of the following methods will always return a collection of documents that are in the SAME order
that they appear in the view.
A.NotesView.Search
B.NotesView.GetCategory
C.NotesView.GetAllEntriesByKey
D.NotesView.GetAllDocumentsByKey
Answer:C

certification Lotus   190-803   190-803 examen   190-803

NO.18 Marvin wants to export a given Notes document to a DXL text file. How would he accomplish this task?
A.He would use the NotesXMLTransformer class to copy the document directly to a text file
B.He would use the ExportDXL method of the NotesDocument class to send the document to a
NotesStream that writes to a text file
C.He would create a NotesDXLExporter object, set the input to the Notes document in question, and set
the output to a NotesDXLOutput object that writes to a text file
D.He would create a NotesDXLExporter object, set the input to the Notes document in question, and set
the output to a string that indicates the path of the text file he wants to create.
Answer:D

Lotus   190-803 examen   190-803   190-803

NO.19 Victor is creating a script that will generate multiple values to be put into a single field. Which one of the
following strategies should he follow?
A.Define the field on the form to be multivalue.
B.Create a scalar identifier, and use a loop which writes the identifier's value to the field.
C.Create a string identifier which separates values with a carriage return, and write the identifier to the
field.
D.Create an array to contain the values, and assign the array to the item in the document using the
extended class syntax
Answer:D

certification Lotus   190-803 examen   190-803   190-803 examen

NO.20 Suzanne has built a view of all movie rentals sorted by Checkout Status. The possible values for
CheckoutStatus are "Available", "Checked Out", "Overdue", and "Overdue With Exceptions". None of
these categories is empty. Suzanne is writing an agent to retrieve all of the rental documents that have a
CheckoutStatus of "Overdue", and send out emails informing the renters of this status. What NotesView
method will build a collection of only the documents with a status of "Overdue"?
A.GetAllDocumentsByKey("Overdue")
B.GetDocumentsByKey("Overdue", True)
C.GetAllDocumentsByKey("Overdue", True)
D.GetAllDocumentsByKey("Overdue", False)
Answer:C

certification Lotus   190-803 examen   certification 190-803   190-803 examen

Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.

Les meilleures Lotus 190-801 examen pratique questions et réponses

Le Certificat Lotus 190-801 est un passport rêvé par beaucoup de professionnels IT. Le test Lotus 190-801 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test Lotus 190-801. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test Lotus 190-801 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A Lotus 190-801 pour prendre un essai.

Peut-être vous voyez les guides d'études similaires pour le test Lotus 190-801, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Lotus 190-801 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Vous allez choisir Pass4Test après essayer une partie de Q&A Lotus 190-801 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Lotus 190-801.

Vous Lotus 190-801 pouvez télécharger le démo Lotus 190-801 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.

Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Lotus 190-801 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Lotus 190-801 est le rêve pour les professionnels ambitieux.

Code d'Examen: 190-801
Nom d'Examen: Lotus (IBM Lotus Notes Domino 8 Application Development Update)
Questions et réponses: 120 Q&As

Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Lotus 190-801 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Lotus 190-801. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Lotus 190-801, vous aurez une meilleure préparation avec l'aide de Pass4Test.

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Lotus 190-801. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

190-801 Démo gratuit à télécharger: http://www.pass4test.fr/190-801.html

NO.1 Kyle is designing a Composite Application that can send a user namefrom aform to aview, by clickinga
buttonontheform. He knows hewants to definea WiringpropertycalledReceiveUserNamethat will beused
when the view is receiving a user name string that is published by the form. When he opens theProperty
Broker Editor to define "ReceiveUserName", what does he define it as?
A. Type
B. Action
C. Event
D. Property
Answer:B

Lotus   190-801   certification 190-801   certification 190-801   190-801 examen

NO.2 Thenew Rich Text Lite "Thumbnail" input type allows you to specify theheight and width of thethumbn
ail image, alongwithwhat other attribute?
A. File type
B. Color depth
C. Image resolution
D. Attachment name
Answer:D

Lotus   190-801 examen   190-801   190-801 examen

NO.3 Thedefault view in the Notes 8 Contacts database allows you todisplay the information in the view eit
heronasingle line(as withatraditional Notesview)orin a"business card"styleformat witheachentry displayed
in an individual box and the boxes arranged in columns, scrollingvertically. To create a view that allows t
his sort of "business card"format,what type of Layout Viewer do you need to specify in theView Propertie
s?
A. Tiled
B. Boxed
C. Vertical
D. Composite
Answer:A

Lotus   190-801 examen   190-801

NO.4 Luigi hascreatedaviewforhis mailfilethat shows thesize ofthe document. In thatcolumn, hewould like t
o display the size as either kilobytes or megabytes. How can Luigi accomplish this?
A. Set thenumberformat for the column to Size(K/M/G)
B. Set thenumberformat for the column to Bytes(K/M/G)
C. Set the Preferences For Display format for the column to Size(K/M/G)
D. Set the Additional Display Formattingfor the column to Bytes(K/M/G)
Answer:B

Lotus   190-801   190-801   190-801 examen
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.

NO.5 Bonnie has a Customerview in her application that has the following columns (in order): CustomerNa
me, Customer Address, Customer Phone, Customer Comments, Last Contacted. She would like tomaxi
mize the amount of column space for the Customer Comments field. Howwould Bonnie accomplishthis in
Designer?
A. Select the "MaximumWidth"property for the CustomerComment column.
B. Set the Height indicator to 9 lines for the Customer Comments column.
C. Select the extend to useavailable windowwidth property for the Customer Comment column
D. Add the column name to the xtend to use available windowwidth property in the Customerview.
Answer:C

Lotus examen   190-801 examen   certification 190-801   190-801 examen   190-801

NO.6 Victor has a Movie Rental Notes application witha Movie Inventory view. The database is not fulltext i
ndexed, and users are complaining about the long search times when they attempt to search thedatabas
e. How can Victor prevent searching in this database if no fulltext index has been created?
A. Select thedon't allow simple search option in theDatabase properties.
B. Deselect the allow simple search option in the Movie Inventory viewproperties.
C. Deselect theallow simple search option in the Movie Inventory document properties.
D. Select the ponfirmfull text index before search option in the Database properties.
Answer:A

Lotus examen   190-801   190-801   certification 190-801

NO.7 Timmy is designing a View and he wants to use the new "Split Action Button" option for one of his Ac
tions. He creates anActionwithsubactions andchecks the"Displayas split button"box, but theActiondoesn't
work as a Split button when he looks at the view in his Notes client.Why is this?
A. Split Action buttons work only for SharedActions.
B. Split Action buttons work only for Forms.
C. Split Action buttons work only for Composite Applications.
D. The "Enable Advanced Action Bar" setting in theViewproperties has not been checked.
Answer:C

Lotus   190-801 examen   190-801 examen

NO.8 Clarisa's agentneeds torunevery timetheAPP012serveris rebooted. Thereis noharmtodataiftheagent r
uns repeatedly, but Clarisa would like to minimize the impact to serverperformance. How should Clarisa t
rigger the agent to run?
A. Set the Runtime Trigger option to "On event", and select "When server starts".
B. Set the Runtime Trigger option to "On event", and select "On agent manager start".
C. Set the Runtime Trigger option to "On schedule". Select "Run once", and select the schedule option"
On serverboot".
D. Set the Runtime Trigger option to "On schedule". Select "More thanoncea day". Clarisa should determ
ine how soon after a serverboot theagent must be run. The schedule frequency should be set tothat amo
unt of time.
Answer:A

certification Lotus   certification 190-801   190-801 examen   certification 190-801

NO.9 Thomas has utilized the rightclick menu option feature inhis application to show his custom actions.
He would like to present users with just the custom actions when they rightclick with theirmouse. How ca
n heaccomplish this?
A. Remove the default menu items from the Action Bar of the view.
B. Deselect include action in ActionBar in the Action button properties of the view.
C. Deselect show default items in rightmousemenu in the Action Bar properties of the view.
D. Select emove default items in rightmousemenu?in the Action button properties of the view.
Answer:C

Lotus examen   190-801   certification 190-801   190-801   190-801 examen

NO.10 Maxie is using thenew "Defer index creation until first use" option in her views that have sortable colu
mns, in order to delay creation of these extra indices until they are needed. She notices that the extracol
umn indices are still being built immediately instead of being deferred. Why is this?
A. This option works only for categorized columns.
B. This option is related to the database's fulltext index, not the view index.
C. This option is valid only when the view is used ina composite application.
D. The server administrator needs to set the ENABLE_ON_DEMAND_COLLATIONS=1 setting in theser
ver's Notes.ini file.
Answer:D

Lotus   190-801 examen   190-801   certification 190-801

NO.11 Thenew "Composite Settings" option in a View column Properties box allows you to specifywhat?
A. An Action to performwhen a row in the view is selected
B. A Property to publishwhen a row in the view is selected
C. Whether or not to display the columnwhen the view is used in a Composite Application
D. An alternate font type, size, and color to use for that columnwhen the view is used in a CompositeApp
lication
Answer:B

Lotus examen   190-801   190-801   certification 190-801

NO.12 When Bert is designing his Composite Application, he wants tohave a Notes view that publishes aUse
rName property to another view and also to a Notes form that is open in edit mode. How does he dothis?
A. He simply uses the Composite Application Editor to wire all three components together.
B. He creates oneCompositeApplicationthat wires thetwoviews together, andthenasecondCompositeAppl
ication that incorporates the first one, with the first viewwired to the form.
C. Becauseeach component can only publish a single property, he has to wire the first viewpublish theus
er name to the second view, and then wire the second view to publish the user name to the form.
D. Becausehe can publish a property only to a single component,he has to make his first viewpublish tw
o properties (e.g. UserName1 and UserName2) that both have the same data, so that one of theproperti
es is wired to the second view and the other is wired to the form.
Answer:A

Lotus   190-801   190-801

NO.13 Scotthas just createda new NSFbased Composite Application. He has addedtwo components to his a
pplication and is about to close the Composite Application Editor (CAE). What does heneed to do if heno
wwants to see how his Composite Application appears in the user interface?
A. Scott will not be able to open the Composite Application within the user interface yet. Thedatabaselau
nch properties must first be set to "Launchas Composite Application".
B. Nothing. The CAE is opened fromwithin the Composite Application. When Scott exits the CAE, he is a
utomatically presented again with the Composite Application, open in the user interface.
C. Scott will not be able to openthe Composite Application within the user interface yet. He will first needt
o open the Composite Application using Domino Designer and set theWiring Properties.
D. When Scott exits the CAE, he is back at the Notes Workspace, just as when exiting other NSFbaseda
pplications. Doubleclick on the Composite Application's icon on theWorkspace to open it in the userinterf
ace.
Answer:B

Lotus examen   190-801   190-801   190-801

NO.14 Linda has selected the database property Support Response Thread History for her Call Logapplicati
on. When she looks at thedocument fields in the Document Properties dialog box, she notices a
new field has been added toeachnew document.What field does Linda see?
A. $TUA
B. $REF
C. $SRTH
D. $REF2
Answer:A

Lotus examen   certification 190-801   190-801 examen

NO.15 Beatricecreated a newCompositeApplicationdatabasein theNotes 8client, but whensheopens itupshe s
ees a grey page that says "This Application page does not contain any content."What does shehave to d
onext?
A. Click the menu option "View Design" to open the database in Domino Designer to edit the Composite
Application definition.
B. Click the menu option "Actions Edit Application"to open the database inthe Composite ApplicationEdit
or to edit the Composite Application definition.
C. Doubleclick the grey page to open the database in the Composite Application Editor to edit theCompo
site Application definition.
D. Rightclick the grey page to open the database inDomino Designer to edit the Composite Applicationd
efinition.
Answer:B

certification Lotus   190-801   190-801

NO.16 Kristen has been asked to develop a Composite Application to "wire" the Customer, Orders, andInvent
ory applications together. She understands that this will result in communication among thedifferent piec
es of the new application. How does this communication work?
A. Components use the Composite Application Broker to communicate with each other. The CompositeA
pplication Editor is used to define Actions and their parameters, and to configure Property Broker options
B. Components use the Composite Application Broker to communicate with each other. The CompositeA
pplication Editor is launched fromDominoDesigner to define Broker Properties and configure Actions and
their parameters.
C. Components use the Property Broker to communicate with each other. TheProperty Broker Editor is l
aunched directly from Domino Designer (orcan be launched via the CAE) to define Properties and config
ure Actions and their parameters.
D. Components use the Property Broker to communicate with each other. Domino Designermust first be
used to define theWiring Properties. Composite Application Broker options can then be configured using
the Composite Application Editor orfromwithin Domino Designer.
Answer:C

certification Lotus   certification 190-801   190-801   certification 190-801   190-801 examen   190-801

NO.17 Barry has just closed theProperty Broker Editor after specifying input and output Action parameters for
his Composite Application Editor (CAE). He notices a curved arrow icon in Domino Designer next to then
ame of theWiring Property. What should Barry do to ensurethat his changes are saved within his Domino
application?
A. Click the "Refresh"button, and then click the "Open" button in the window that displays.
B. Nothing. The Property Broker automatically saves changes inside the Domino application.
C. Click the "MergeWSDLs" button and click "OK" in the confirmation prompt that thendisplays.
D. Open theWiring Property properties and ensure that the "Store in NSF" option is selected. Thechange
s will be saved within the Domino application when Domino Designer is closed.
Answer:A

certification Lotus   190-801   certification 190-801   190-801

NO.18 Samirwants to designanddeploy aCompositeApplicationthat consists ofcomponents fromtwoLotus Not
es databases that both reside on the same Domino Server. He would like to include the CompositeApplic
ation definition inside one of the Lotus Notes databases, to make it easier to deploy and replicate. Can h
edo this?
A. No, a Composite Application definitionmust be hosted on aWebSphere Portal server.
B. No, a Composite Application definitionmust reside in a Lotus Notes database that is based on the"Bla
nk Composite Application" template.
C. Yes, he simply needs to click the "NewComposite Application"button in the Composite Applications A
pplication section of the Database design and begin writing the definition.
D. Yes, but first he needs to define the Composite Application in the Composite Application Editor andsa
ve the resulting XML file. Thenhe can createa new definition in the Composite Applications Application s
ection of the Database design and import the XML.
Answer:D

Lotus   190-801   190-801

NO.19 Myrtleis modifyingthedesignofaViewin aNotesdatabase,soit canupdateapublishedProperty that the oth
er components in a Composite Application can respond to. Where does she write code that updates a Pr
operty?
A. In a view action
B. In the OnSelect event of the view
C. In theQueryModeChange event of the view
D. In theInitialize subroutine of the Global section of the view
Answer: B

Lotus   190-801   190-801 examen   190-801 examen

NO.20 Nina has been asked toadd several views to theSales.nsf database, manyof which are to includemulti
plesortedcolumns andmultipleusersortable columns. Howcanshe helpminimize theimpact totheserverfro
m these new views?
A. Select the "Defer index creationuntil first use" Advanced Option from the Advanced tab of thedatabase
properties.
B. Open each view that includes sorted or usersortable columns. Select the "Defer index creation until fir
st use" Index option from the Advanced tab of theviewproperties.
C. Open each view that includes sorted columns. From the Sorting tab of the column properties of eachs
orted column, select the "Defer index creation until first use" option.
D. Open each view that includes a usersortable column. From the Sorting tab of the columnproperties of
each usersortable column, select the "Defer index creation until first use" option.
Answer:D

Lotus examen   certification 190-801   190-801 examen   190-801   190-801   190-801

Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.