显示标签为“HP2-K01”的博文。显示所有博文
显示标签为“HP2-K01”的博文。显示所有博文

2013年12月15日星期日

HP HP2-K01 examen pratique questions et réponses

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test HP HP2-K01. Ajoutez la Q&A au panier.

Pass4Test vous promet de vous aider à passer le test HP HP2-K01, vous pouvez télécharger maintenant les Q&As partielles de test HP HP2-K01 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Si vous voulez ne se soucier plus à passer le test HP HP2-K01, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test HP HP2-K01. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A HP HP2-K01 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.

Vous pouvez télécharger tout d'abord une partie de Q&A Certification HP HP2-K01 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test HP HP2-K01. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A HP HP2-K01 comme votre guide d'étude.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test HP HP2-K01, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test HP HP2-K01 coûtant un peu d'argent.

Code d'Examen: HP2-K01
Nom d'Examen: HP (Servicing HP BladeSystem)
Questions et réponses: 126 Q&As

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification HP HP2-K01. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test HP HP2-K01. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

HP2-K01 Démo gratuit à télécharger: http://www.pass4test.fr/HP2-K01.html

NO.1 You work with an enclosure equipped with ten fans and sixteen half-height servers. Two fans
failed.
In which slots must you insert the remaining fans to keep all sixteen servers working?
A. 1, 2, 3, 4, 6, 7, 8, 9
B. 2, 3, 4, 5, 7, 8, 9, 10
C. 1, 2, 4, 5, 6, 7, 9, 10
D. 1, 2, 3, 4, 7, 8, 9, 10
Answer: C

HP   certification HP2-K01   certification HP2-K01

NO.2 You added an interconnect switch in an HP BladeSystem c-Class and the switch does not power
up. What should you check? (Select three.)
A. interconnect type and location
B. position of the mezzanine cards
C. position of the power supplies in the enclosure
D. status of the first full-height server blade in the enclosure
E. enclosure and switch status in the Onboard Administrator
F. whether interconnect bay has been activated for the bay the switch is in
Answer: A,B,E

HP   HP2-K01   certification HP2-K01

NO.3 A customer wants to install five full-height blade servers into a c-Class enclosure that is running
N+N power supply redundancy mode.
How many power supplies are required to support this configuration?
A. 3
B. 4
C. 5
D. 6
Answer: D

certification HP   HP2-K01   certification HP2-K01

NO.4 What is the maximum number of DIMMs that can be installed into an HP Integrity BL860c Server
Blade?
A. 6
B. 8
C. 10
D. 12
E. 16
Answer: D

HP examen   HP2-K01   certification HP2-K01   certification HP2-K01   HP2-K01   certification HP2-K01

NO.5 You installed new server blades into an HP BladeSystem c-Class enclosure.
How does the enclosure indicate if a server blade is not installed correctly?
A. The HPBladeSystem Insight Display will flash blue.
B. The interconnect will display errors when you configure it.
C. The Onboard Administrator will not allow the interconnect to power on.
D. The Onboard Administrator will not allow the incorrectly placed server blade to power on.
Answer: D

HP   certification HP2-K01   certification HP2-K01

NO.6 You need to update Integrated Lights-Outs (iLO) card firmware, but you do not have physical
access to the server.
How can you accomplish this task?
A. useiLO web interface
B. use System Software Manager
C. use Version Control Repository Manager (VCRM)
D. use Instant Support Enterprise Edition (ISEE) software
Answer: A

certification HP   HP2-K01   HP2-K01   HP2-K01

NO.7 You are performing maintenance at a customer's site and they are booting an HP BladeSystem p-
Class server from a storage area network (SAN). You must configure the server with a virtual boot
device that enables the server to fetch boot-loading instructions from the SAN.
How is the virtual boot device presented to the host server?
A. as a Logical Unit Number (LUN) on the disk array
B. as a Pre-boot Execution Environment (PXE) NIC
C. as aFibre channel Host Bus Adapter (HBA) on the target server
D. as a Deployment Server database attached to the target server
Answer: A

certification HP   certification HP2-K01   certification HP2-K01   certification HP2-K01

NO.8 Which HP remote application continuously monitors hardware and sends an alert to HP when an
error occurs?
A. HP Systems Insight Manager
B. Open Service Event Manager
C. Instant SupportEnterprise Edition
D. Integrated Management Log Viewer
Answer: C

HP   HP2-K01   HP2-K01 examen   HP2-K01 examen   HP2-K01 examen   HP2-K01

NO.9 Which HP StorageWorks arrays can be used with the HP BladeSystem c-Class? (Select two.)
A. MSA 20
B. MSA 30
C. MSA 500
D. MSA 1000
E. MSA 1500cs
Answer: D,E

certification HP   HP2-K01   certification HP2-K01   HP2-K01   HP2-K01

NO.10 Your customer requires software that will help keep HP software and drivers installed on c-Class
blade servers up-to-date. They want a low-cost solution.
What should you recommend to this customer? (Select two)
A. HP Client Manager
B. HP Virtualization Software
C. Version Control Agent (VCA)
D. Version Control Repository Manager (VCRM)
E. Vulnerability and Patch Management Pack (VPM)
Answer: C,D

HP   certification HP2-K01   HP2-K01 examen   HP2-K01   HP2-K01

NO.11 Your customer wants a solution that allows them to remotely deploy operating systems without
having to interact directly with each server blade or hiring additional IT staff.
Which product should they install to accomplish this goal?
A. HP Version Control Agent
B. HP Rapid Deployment Pack
C. HP Remote Deployment Utility
D. HP Vulnerability and Patch Management
E. HP Version Control Repository Manager
Answer: B

HP   HP2-K01   HP2-K01 examen   HP2-K01 examen

NO.12 Your customer has eight BL20p G3 servers all with Fibre Channel mezzanine cards. They also
have a GbE2 switch installed with a Brocade switch attached.
None of their servers can access external shared storage (MSA1500cs). What should you verify
first?
A. if the BL20p G3 has a 4Gb or fasterFibre Channel card
B. if the Brocade switch has an IP address assigned by DHCP
C. ifFibre Channel pass through is installed on the GbE2 switches
D. if Selective Storage Presentation (SSP) is enabled on the MSA1500cs
Answer: C

certification HP   HP2-K01 examen   HP2-K01

NO.13 How many BL30p servers can be supported by a fully populated 1U p-Class power enclosure?
A. 4
B. 8
C. 12
D. 16
Answer: D

HP   HP2-K01   HP2-K01   HP2-K01   certification HP2-K01

NO.14 During which portion of the HP Troubleshooting Methodology do you carefully observe and record
the results of each step including any error messages or changes in functionality?
A. Step 1 - Collect data
B. Step 3 - Develop the action plan
C. Step 4 - Execute the action plan
D. Step 6 - Implement preventative measures
Answer: C

certification HP   HP2-K01 examen   HP2-K01 examen   certification HP2-K01   HP2-K01

NO.15 In which situation are qualified rack options covered by the HP BladeSystem c-Class Care Pack
services?
A. when the options are installed in the same rack
B. when the rack is fully populated with p-Class blades
C. when the options are used only with blade equipment
D. when the options are purchased with the c7000 enclosure
Answer: A

HP   certification HP2-K01   HP2-K01 examen

NO.16 Which ProLiant Essentials Foundation Pack CD can run the Array Diagnostic Utility (ADU)?
A. Diagnostic CD
B. SmartStart CD
C. Management CD
D. Firmware Maintenance CD
Answer: B

certification HP   certification HP2-K01   HP2-K01   certification HP2-K01   HP2-K01   HP2-K01 examen

NO.17 Which item is required to power on and troubleshoot a single p-Class blade server that has been
removed from its enclosure?
A. Diagnostic Station and adapter
B. Server Blade Management Module
C. Integrated Lights-Out remote console
D. You cannot power on and troubleshoot a p-Class blade that has been removed from its
enclosure
Answer: A

HP examen   HP2-K01 examen   certification HP2-K01   HP2-K01   HP2-K01 examen

NO.18 What happens if a server blade is moved from an enclosure managed by Virtual Connect to an
enclosure that is not managed by Virtual Connect?
A. MAC address and WWNs must be changed manually for the server blade.
B. Local MAC addresses are automatically returned to the original factory defaults.
C. After boot, server blades will gain access to the network as soon as the server and interconnect
modules are ready.
D. The configuration of the server blade is automatically updated before it is allowed to power on
and connect to the network.
Answer: B

HP   certification HP2-K01   certification HP2-K01   HP2-K01 examen

NO.19 Which utility allows you to easily install and provision one or many blade servers in an unattended,
automated fashion?
A. Virtual Install Disk
B. Rapid Deployment Pack (RDP)
C. ROM-Based Setup Utility (RBSU)
D. HP Systems Insight Manager (HP SIM)
Answer: B

HP   HP2-K01 examen   certification HP2-K01   HP2-K01 examen   HP2-K01   HP2-K01 examen

NO.20 If you suspect the hard drive or hard drive subsystem may be at fault in a system, which HP tools
can isolate the source of the problem? (Select two.)
A. Onboard Administrator
B. Array Diagnostics Utility (ADU)
C. ROM-Based Setup Utility (RBSU)
D. Insight Diagnostics Online Edition
E. Option ROM Configuration for Arrays (ORCA)
Answer: B,D

certification HP   HP2-K01   HP2-K01   HP2-K01 examen   HP2-K01 examen

NO.21 Which HP cooling technology uses power management to control CPU power state automatically
based on application demand?
A. Active Cool fans
B. Dynamic Power Saver
C. Modular Cooling System
D. ProLiant Power Regulator
Answer: D

HP examen   HP2-K01   HP2-K01 examen   HP2-K01 examen   HP2-K01

NO.22 Which GUI utility diagnoses system bottlenecks and is easily integrated with HP Systems Insight
Manager?
A. HP Control Tower for HPBladeSystem
B. HPProLiant Essentials Workload Management Pack
C. HPProLiant Essentials Performance Management Pack
D. HPProLiant Essentials Vulnerability and Patch Management Pack
Answer: C

HP   HP2-K01   HP2-K01 examen

NO.23 Some servers within a customer data center turn off because of overheating. You have an air
conditioning specification and want to compare this information with the amount of heat generated
by the servers.
Which HP tool provides this information?
A. Product Bulletin
B. Power Calculator
C. Data Center Sizer
D. Performance Quick Reference Tool (PQRT)
Answer: B

HP examen   HP2-K01   certification HP2-K01

NO.24 You are installing a new InifiniBand Mezzanine card into a customer's BL480c server blade. The
mezzanine card is installed into mezzanine slot 2.
Which interconnect location must the InifiniBand controller be installed into?
A. bays 3-4
B. bays 5-6
C. bays 7-8
D. Placement of the controller does not matter. The Onboard Administrator will properly map
theInifiniband mezzanine card to the installed Infiniband Interconnect.
Answer: B

HP   certification HP2-K01   HP2-K01   HP2-K01 examen

NO.25 Which online tool can be utilized to plan the power requirements for an HP Integrity BL860c
Blade?
A. HP Part Surfer
B. HP Knowledge Base
C. HPBladeSystem Sizer
D. HP Power Analysis & Planner
Answer: C

HP   HP2-K01   HP2-K01

NO.26 Which task of the HP Troubleshooting Methodology do you accomplish when performing Step 2?
A. Determine which subsystem could cause the problem.
B. Identify the steps necessary to implement each solution.
C. Identify the possible solution for each possible root cause.
D. Determine and use the most appropriate tools for each situation.
Answer: A

HP   HP2-K01   HP2-K01   certification HP2-K01

NO.27 Which c-Class BL series server blade supports 4 internal SAS drives?
A. BL460c
B. BL480c
C. BL685c
D. BL860c
Answer: B

HP examen   HP2-K01   HP2-K01 examen

NO.28 Which processor types are offered on the BL460c? (Select two)
A. AMDOpteron Processor
B. Dual-Core Intel EM64T processor
C. Intel Itanium 2 Madison processor
D. Intel Itanium 2 Montecito processor
E. Quad-Core Intel EM64T processor
Answer: B,E

certification HP   HP2-K01   certification HP2-K01   HP2-K01   certification HP2-K01

NO.29 Which management functionality is provided by the Onboard Administrator? (Select two.)
A. manages shared power and cooling for the enclosure
B. provides management Ethernet fabric for the enclosure
C. provides HP SIM (System Insight Manager) functionality for Blade servers
D. activates Remote Deployment Pack (RDP) when an in-service server fails
E. automates the process of deploying server operating systems and software
Answer: A,B

HP   HP2-K01   HP2-K01   certification HP2-K01

NO.30 A customer reports that an InfiniBand switch does not power on. What is a possible cause of this
problem?
A. Dynamic Power Saver is not activated on theInfiniBand switch.
B. A three-phase power system should be used withInfiniBand switches.
C. At least one server blade is not equipped with Host Channel Adapter (HCA) card.
D. The Onboard Administrator version firmware does not supportInfiniBand switches.
Answer: D

HP   certification HP2-K01   HP2-K01 examen   certification HP2-K01   certification HP2-K01

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de HP après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.

2013年9月6日星期五

Pass4Test offre de HP HP2-K01 matériaux d'essai

La Q&A HP HP2-K01 de Pass4Test est liée bien avec le test réel de HP HP2-K01. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test HP HP2-K01 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test HP HP2-K01.

Code d'Examen: HP2-K01
Nom d'Examen: HP (Servicing HP BladeSystem)
Questions et réponses: 126 Q&As

La population de la Certification HP HP2-K01 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test HP HP2-K01 à se preuver. Mais le taux du succès et bien bas. Participer le test HP HP2-K01 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Le test HP HP2-K01 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test HP HP2-K01 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat HP HP2-K01 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test HP HP2-K01 avec l'aide de Pass4Test.

HP2-K01 Démo gratuit à télécharger: http://www.pass4test.fr/HP2-K01.html

NO.1 You installed new server blades into an HP BladeSystem c-Class enclosure.
How does the enclosure indicate if a server blade is not installed correctly?
A. The HPBladeSystem Insight Display will flash blue.
B. The interconnect will display errors when you configure it.
C. The Onboard Administrator will not allow the interconnect to power on.
D. The Onboard Administrator will not allow the incorrectly placed server blade to power on.
Answer: D

HP   HP2-K01   HP2-K01   HP2-K01 examen

NO.2 Your customer requires software that will help keep HP software and drivers installed on c-Class
blade servers up-to-date. They want a low-cost solution.
What should you recommend to this customer? (Select two)
A. HP Client Manager
B. HP Virtualization Software
C. Version Control Agent (VCA)
D. Version Control Repository Manager (VCRM)
E. Vulnerability and Patch Management Pack (VPM)
Answer: C,D

HP examen   HP2-K01 examen   HP2-K01 examen

NO.3 You are performing maintenance at a customer's site and they are booting an HP BladeSystem p-
Class server from a storage area network (SAN). You must configure the server with a virtual boot
device that enables the server to fetch boot-loading instructions from the SAN.
How is the virtual boot device presented to the host server?
A. as a Logical Unit Number (LUN) on the disk array
B. as a Pre-boot Execution Environment (PXE) NIC
C. as aFibre channel Host Bus Adapter (HBA) on the target server
D. as a Deployment Server database attached to the target server
Answer: A

HP   certification HP2-K01   HP2-K01 examen

NO.4 What is the maximum number of DIMMs that can be installed into an HP Integrity BL860c Server
Blade?
A. 6
B. 8
C. 10
D. 12
E. 16
Answer: D

HP   HP2-K01 examen   HP2-K01 examen   HP2-K01

NO.5 Which processor types are offered on the BL460c? (Select two)
A. AMDOpteron Processor
B. Dual-Core Intel EM64T processor
C. Intel Itanium 2 Madison processor
D. Intel Itanium 2 Montecito processor
E. Quad-Core Intel EM64T processor
Answer: B,E

certification HP   HP2-K01   certification HP2-K01   certification HP2-K01

NO.6 Which management functionality is provided by the Onboard Administrator? (Select two.)
A. manages shared power and cooling for the enclosure
B. provides management Ethernet fabric for the enclosure
C. provides HP SIM (System Insight Manager) functionality for Blade servers
D. activates Remote Deployment Pack (RDP) when an in-service server fails
E. automates the process of deploying server operating systems and software
Answer: A,B

certification HP   HP2-K01   HP2-K01 examen   HP2-K01

NO.7 A customer wants to install five full-height blade servers into a c-Class enclosure that is running
N+N power supply redundancy mode.
How many power supplies are required to support this configuration?
A. 3
B. 4
C. 5
D. 6
Answer: D

HP   HP2-K01   certification HP2-K01   certification HP2-K01   HP2-K01

NO.8 Which item is required to power on and troubleshoot a single p-Class blade server that has been
removed from its enclosure?
A. Diagnostic Station and adapter
B. Server Blade Management Module
C. Integrated Lights-Out remote console
D. You cannot power on and troubleshoot a p-Class blade that has been removed from its
enclosure
Answer: A

HP   HP2-K01   HP2-K01 examen   HP2-K01   certification HP2-K01

NO.9 You need to update Integrated Lights-Outs (iLO) card firmware, but you do not have physical
access to the server.
How can you accomplish this task?
A. useiLO web interface
B. use System Software Manager
C. use Version Control Repository Manager (VCRM)
D. use Instant Support Enterprise Edition (ISEE) software
Answer: A

HP   certification HP2-K01   HP2-K01   HP2-K01

NO.10 During which portion of the HP Troubleshooting Methodology do you carefully observe and record
the results of each step including any error messages or changes in functionality?
A. Step 1 - Collect data
B. Step 3 - Develop the action plan
C. Step 4 - Execute the action plan
D. Step 6 - Implement preventative measures
Answer: C

HP   certification HP2-K01   HP2-K01   HP2-K01 examen   HP2-K01

NO.11 Your customer wants a solution that allows them to remotely deploy operating systems without
having to interact directly with each server blade or hiring additional IT staff.
Which product should they install to accomplish this goal?
A. HP Version Control Agent
B. HP Rapid Deployment Pack
C. HP Remote Deployment Utility
D. HP Vulnerability and Patch Management
E. HP Version Control Repository Manager
Answer: B

HP   certification HP2-K01   certification HP2-K01   HP2-K01 examen

NO.12 If you suspect the hard drive or hard drive subsystem may be at fault in a system, which HP tools
can isolate the source of the problem? (Select two.)
A. Onboard Administrator
B. Array Diagnostics Utility (ADU)
C. ROM-Based Setup Utility (RBSU)
D. Insight Diagnostics Online Edition
E. Option ROM Configuration for Arrays (ORCA)
Answer: B,D

HP   HP2-K01 examen   certification HP2-K01   certification HP2-K01

NO.13 Which HP StorageWorks arrays can be used with the HP BladeSystem c-Class? (Select two.)
A. MSA 20
B. MSA 30
C. MSA 500
D. MSA 1000
E. MSA 1500cs
Answer: D,E

certification HP   certification HP2-K01   HP2-K01   HP2-K01   HP2-K01

NO.14 Your customer has eight BL20p G3 servers all with Fibre Channel mezzanine cards. They also
have a GbE2 switch installed with a Brocade switch attached.
None of their servers can access external shared storage (MSA1500cs). What should you verify
first?
A. if the BL20p G3 has a 4Gb or fasterFibre Channel card
B. if the Brocade switch has an IP address assigned by DHCP
C. ifFibre Channel pass through is installed on the GbE2 switches
D. if Selective Storage Presentation (SSP) is enabled on the MSA1500cs
Answer: C

HP   HP2-K01   HP2-K01   HP2-K01 examen   HP2-K01 examen   HP2-K01

NO.15 Which task of the HP Troubleshooting Methodology do you accomplish when performing Step 2?
A. Determine which subsystem could cause the problem.
B. Identify the steps necessary to implement each solution.
C. Identify the possible solution for each possible root cause.
D. Determine and use the most appropriate tools for each situation.
Answer: A

certification HP   HP2-K01 examen   HP2-K01   certification HP2-K01

NO.16 Some servers within a customer data center turn off because of overheating. You have an air
conditioning specification and want to compare this information with the amount of heat generated
by the servers.
Which HP tool provides this information?
A. Product Bulletin
B. Power Calculator
C. Data Center Sizer
D. Performance Quick Reference Tool (PQRT)
Answer: B

HP   HP2-K01 examen   HP2-K01

NO.17 What happens if a server blade is moved from an enclosure managed by Virtual Connect to an
enclosure that is not managed by Virtual Connect?
A. MAC address and WWNs must be changed manually for the server blade.
B. Local MAC addresses are automatically returned to the original factory defaults.
C. After boot, server blades will gain access to the network as soon as the server and interconnect
modules are ready.
D. The configuration of the server blade is automatically updated before it is allowed to power on
and connect to the network.
Answer: B

HP   certification HP2-K01   HP2-K01   certification HP2-K01

NO.18 You added an interconnect switch in an HP BladeSystem c-Class and the switch does not power
up. What should you check? (Select three.)
A. interconnect type and location
B. position of the mezzanine cards
C. position of the power supplies in the enclosure
D. status of the first full-height server blade in the enclosure
E. enclosure and switch status in the Onboard Administrator
F. whether interconnect bay has been activated for the bay the switch is in
Answer: A,B,E

HP   HP2-K01 examen   HP2-K01

NO.19 Which HP cooling technology uses power management to control CPU power state automatically
based on application demand?
A. Active Cool fans
B. Dynamic Power Saver
C. Modular Cooling System
D. ProLiant Power Regulator
Answer: D

HP examen   certification HP2-K01   HP2-K01

NO.20 You are installing a new InifiniBand Mezzanine card into a customer's BL480c server blade. The
mezzanine card is installed into mezzanine slot 2.
Which interconnect location must the InifiniBand controller be installed into?
A. bays 3-4
B. bays 5-6
C. bays 7-8
D. Placement of the controller does not matter. The Onboard Administrator will properly map
theInifiniband mezzanine card to the installed Infiniband Interconnect.
Answer: B

HP examen   HP2-K01 examen   HP2-K01 examen   certification HP2-K01   HP2-K01

NO.21 In which situation are qualified rack options covered by the HP BladeSystem c-Class Care Pack
services?
A. when the options are installed in the same rack
B. when the rack is fully populated with p-Class blades
C. when the options are used only with blade equipment
D. when the options are purchased with the c7000 enclosure
Answer: A

HP examen   HP2-K01   HP2-K01   certification HP2-K01

NO.22 Which online tool can be utilized to plan the power requirements for an HP Integrity BL860c
Blade?
A. HP Part Surfer
B. HP Knowledge Base
C. HPBladeSystem Sizer
D. HP Power Analysis & Planner
Answer: C

HP   HP2-K01   HP2-K01   HP2-K01 examen

NO.23 You work with an enclosure equipped with ten fans and sixteen half-height servers. Two fans
failed.
In which slots must you insert the remaining fans to keep all sixteen servers working?
A. 1, 2, 3, 4, 6, 7, 8, 9
B. 2, 3, 4, 5, 7, 8, 9, 10
C. 1, 2, 4, 5, 6, 7, 9, 10
D. 1, 2, 3, 4, 7, 8, 9, 10
Answer: C

certification HP   HP2-K01   HP2-K01 examen   HP2-K01   HP2-K01

NO.24 Which HP remote application continuously monitors hardware and sends an alert to HP when an
error occurs?
A. HP Systems Insight Manager
B. Open Service Event Manager
C. Instant SupportEnterprise Edition
D. Integrated Management Log Viewer
Answer: C

HP examen   HP2-K01 examen   certification HP2-K01

NO.25 A customer reports that an InfiniBand switch does not power on. What is a possible cause of this
problem?
A. Dynamic Power Saver is not activated on theInfiniBand switch.
B. A three-phase power system should be used withInfiniBand switches.
C. At least one server blade is not equipped with Host Channel Adapter (HCA) card.
D. The Onboard Administrator version firmware does not supportInfiniBand switches.
Answer: D

HP   certification HP2-K01   certification HP2-K01   HP2-K01   HP2-K01 examen   HP2-K01

NO.26 Which GUI utility diagnoses system bottlenecks and is easily integrated with HP Systems Insight
Manager?
A. HP Control Tower for HPBladeSystem
B. HPProLiant Essentials Workload Management Pack
C. HPProLiant Essentials Performance Management Pack
D. HPProLiant Essentials Vulnerability and Patch Management Pack
Answer: C

HP   HP2-K01   HP2-K01 examen

NO.27 Which ProLiant Essentials Foundation Pack CD can run the Array Diagnostic Utility (ADU)?
A. Diagnostic CD
B. SmartStart CD
C. Management CD
D. Firmware Maintenance CD
Answer: B

HP   certification HP2-K01   HP2-K01 examen   HP2-K01

NO.28 Which utility allows you to easily install and provision one or many blade servers in an unattended,
automated fashion?
A. Virtual Install Disk
B. Rapid Deployment Pack (RDP)
C. ROM-Based Setup Utility (RBSU)
D. HP Systems Insight Manager (HP SIM)
Answer: B

HP   HP2-K01   HP2-K01 examen   certification HP2-K01

NO.29 Which c-Class BL series server blade supports 4 internal SAS drives?
A. BL460c
B. BL480c
C. BL685c
D. BL860c
Answer: B

certification HP   HP2-K01   certification HP2-K01   certification HP2-K01

NO.30 How many BL30p servers can be supported by a fully populated 1U p-Class power enclosure?
A. 4
B. 8
C. 12
D. 16
Answer: D

certification HP   HP2-K01   HP2-K01   HP2-K01   HP2-K01   HP2-K01

Finalement, la Q&A HP HP2-K01 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test HP HP2-K01 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification HP, vous aurez un meilleur salaire et une plus grande space à se développer.

2013年8月23日星期五

Meilleur HP HP2-K01 test formation guide

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test HP HP2-K01, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

L'importance de la position de Certificat HP HP2-K01 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen HP HP2-K01 par votre première fois.

Pass4Test est un catalyseur de votre succès de test HP HP2-K01. En visant la Certification de HP, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test HP HP2-K01, la Q&A HP HP2-K01 est un bon choix pour vous.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test HP HP2-K01. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Si vous traviallez dur encore pour préparer le test de HP HP2-K01 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test HP HP2-K01.

Code d'Examen: HP2-K01
Nom d'Examen: HP (Servicing HP BladeSystem)
Questions et réponses: 126 Q&As

Certification HP HP2-K01 est un des tests plus importants dans le système de Certification HP. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test HP HP2-K01 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.

Selon les feedbacks offerts par les candidats, c'est facile à réussir le test HP HP2-K01 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification HP HP2-K01. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test HP HP2-K01, vous aurez une meilleure préparation avec l'aide de Pass4Test.

HP2-K01 Démo gratuit à télécharger: http://www.pass4test.fr/HP2-K01.html

NO.1 Which HP cooling technology uses power management to control CPU power state automatically
based on application demand?
A. Active Cool fans
B. Dynamic Power Saver
C. Modular Cooling System
D. ProLiant Power Regulator
Answer: D

HP examen   HP2-K01   certification HP2-K01   HP2-K01

NO.2 Your customer wants a solution that allows them to remotely deploy operating systems without
having to interact directly with each server blade or hiring additional IT staff.
Which product should they install to accomplish this goal?
A. HP Version Control Agent
B. HP Rapid Deployment Pack
C. HP Remote Deployment Utility
D. HP Vulnerability and Patch Management
E. HP Version Control Repository Manager
Answer: B

certification HP   HP2-K01   HP2-K01   certification HP2-K01   HP2-K01 examen   HP2-K01

NO.3 Which management functionality is provided by the Onboard Administrator? (Select two.)
A. manages shared power and cooling for the enclosure
B. provides management Ethernet fabric for the enclosure
C. provides HP SIM (System Insight Manager) functionality for Blade servers
D. activates Remote Deployment Pack (RDP) when an in-service server fails
E. automates the process of deploying server operating systems and software
Answer: A,B

HP   HP2-K01 examen   HP2-K01   HP2-K01 examen

NO.4 Which utility allows you to easily install and provision one or many blade servers in an unattended,
automated fashion?
A. Virtual Install Disk
B. Rapid Deployment Pack (RDP)
C. ROM-Based Setup Utility (RBSU)
D. HP Systems Insight Manager (HP SIM)
Answer: B

HP   HP2-K01   HP2-K01   HP2-K01 examen   HP2-K01 examen   certification HP2-K01

NO.5 A customer reports that an InfiniBand switch does not power on. What is a possible cause of this
problem?
A. Dynamic Power Saver is not activated on theInfiniBand switch.
B. A three-phase power system should be used withInfiniBand switches.
C. At least one server blade is not equipped with Host Channel Adapter (HCA) card.
D. The Onboard Administrator version firmware does not supportInfiniBand switches.
Answer: D

certification HP   HP2-K01   HP2-K01

NO.6 What happens if a server blade is moved from an enclosure managed by Virtual Connect to an
enclosure that is not managed by Virtual Connect?
A. MAC address and WWNs must be changed manually for the server blade.
B. Local MAC addresses are automatically returned to the original factory defaults.
C. After boot, server blades will gain access to the network as soon as the server and interconnect
modules are ready.
D. The configuration of the server blade is automatically updated before it is allowed to power on
and connect to the network.
Answer: B

HP   HP2-K01 examen   HP2-K01 examen   HP2-K01   HP2-K01

NO.7 Which GUI utility diagnoses system bottlenecks and is easily integrated with HP Systems Insight
Manager?
A. HP Control Tower for HPBladeSystem
B. HPProLiant Essentials Workload Management Pack
C. HPProLiant Essentials Performance Management Pack
D. HPProLiant Essentials Vulnerability and Patch Management Pack
Answer: C

HP   HP2-K01   HP2-K01 examen   certification HP2-K01   HP2-K01

NO.8 Which processor types are offered on the BL460c? (Select two)
A. AMDOpteron Processor
B. Dual-Core Intel EM64T processor
C. Intel Itanium 2 Madison processor
D. Intel Itanium 2 Montecito processor
E. Quad-Core Intel EM64T processor
Answer: B,E

certification HP   HP2-K01 examen   certification HP2-K01   HP2-K01 examen

NO.9 Which HP remote application continuously monitors hardware and sends an alert to HP when an
error occurs?
A. HP Systems Insight Manager
B. Open Service Event Manager
C. Instant SupportEnterprise Edition
D. Integrated Management Log Viewer
Answer: C

HP examen   HP2-K01 examen   HP2-K01 examen

NO.10 How many BL30p servers can be supported by a fully populated 1U p-Class power enclosure?
A. 4
B. 8
C. 12
D. 16
Answer: D

HP   HP2-K01   HP2-K01   HP2-K01 examen   HP2-K01   certification HP2-K01

NO.11 Which online tool can be utilized to plan the power requirements for an HP Integrity BL860c
Blade?
A. HP Part Surfer
B. HP Knowledge Base
C. HPBladeSystem Sizer
D. HP Power Analysis & Planner
Answer: C

HP examen   HP2-K01   certification HP2-K01   certification HP2-K01

NO.12 You installed new server blades into an HP BladeSystem c-Class enclosure.
How does the enclosure indicate if a server blade is not installed correctly?
A. The HPBladeSystem Insight Display will flash blue.
B. The interconnect will display errors when you configure it.
C. The Onboard Administrator will not allow the interconnect to power on.
D. The Onboard Administrator will not allow the incorrectly placed server blade to power on.
Answer: D

HP examen   HP2-K01   HP2-K01   HP2-K01

NO.13 You work with an enclosure equipped with ten fans and sixteen half-height servers. Two fans
failed.
In which slots must you insert the remaining fans to keep all sixteen servers working?
A. 1, 2, 3, 4, 6, 7, 8, 9
B. 2, 3, 4, 5, 7, 8, 9, 10
C. 1, 2, 4, 5, 6, 7, 9, 10
D. 1, 2, 3, 4, 7, 8, 9, 10
Answer: C

certification HP   HP2-K01   HP2-K01

NO.14 Which task of the HP Troubleshooting Methodology do you accomplish when performing Step 2?
A. Determine which subsystem could cause the problem.
B. Identify the steps necessary to implement each solution.
C. Identify the possible solution for each possible root cause.
D. Determine and use the most appropriate tools for each situation.
Answer: A

HP examen   HP2-K01   HP2-K01 examen

NO.15 You are performing maintenance at a customer's site and they are booting an HP BladeSystem p-
Class server from a storage area network (SAN). You must configure the server with a virtual boot
device that enables the server to fetch boot-loading instructions from the SAN.
How is the virtual boot device presented to the host server?
A. as a Logical Unit Number (LUN) on the disk array
B. as a Pre-boot Execution Environment (PXE) NIC
C. as aFibre channel Host Bus Adapter (HBA) on the target server
D. as a Deployment Server database attached to the target server
Answer: A

certification HP   HP2-K01   HP2-K01 examen   certification HP2-K01   certification HP2-K01   certification HP2-K01

NO.16 You need to update Integrated Lights-Outs (iLO) card firmware, but you do not have physical
access to the server.
How can you accomplish this task?
A. useiLO web interface
B. use System Software Manager
C. use Version Control Repository Manager (VCRM)
D. use Instant Support Enterprise Edition (ISEE) software
Answer: A

HP   HP2-K01   certification HP2-K01   HP2-K01   HP2-K01 examen

NO.17 Your customer has eight BL20p G3 servers all with Fibre Channel mezzanine cards. They also
have a GbE2 switch installed with a Brocade switch attached.
None of their servers can access external shared storage (MSA1500cs). What should you verify
first?
A. if the BL20p G3 has a 4Gb or fasterFibre Channel card
B. if the Brocade switch has an IP address assigned by DHCP
C. ifFibre Channel pass through is installed on the GbE2 switches
D. if Selective Storage Presentation (SSP) is enabled on the MSA1500cs
Answer: C

HP examen   HP2-K01   HP2-K01   certification HP2-K01

NO.18 If you suspect the hard drive or hard drive subsystem may be at fault in a system, which HP tools
can isolate the source of the problem? (Select two.)
A. Onboard Administrator
B. Array Diagnostics Utility (ADU)
C. ROM-Based Setup Utility (RBSU)
D. Insight Diagnostics Online Edition
E. Option ROM Configuration for Arrays (ORCA)
Answer: B,D

HP   HP2-K01 examen   HP2-K01 examen   HP2-K01   HP2-K01 examen   HP2-K01

NO.19 What is the maximum number of DIMMs that can be installed into an HP Integrity BL860c Server
Blade?
A. 6
B. 8
C. 10
D. 12
E. 16
Answer: D

HP examen   certification HP2-K01   HP2-K01

NO.20 Which c-Class BL series server blade supports 4 internal SAS drives?
A. BL460c
B. BL480c
C. BL685c
D. BL860c
Answer: B

HP   certification HP2-K01   HP2-K01   HP2-K01   certification HP2-K01

NO.21 In which situation are qualified rack options covered by the HP BladeSystem c-Class Care Pack
services?
A. when the options are installed in the same rack
B. when the rack is fully populated with p-Class blades
C. when the options are used only with blade equipment
D. when the options are purchased with the c7000 enclosure
Answer: A

certification HP   HP2-K01   HP2-K01 examen   HP2-K01 examen

NO.22 Some servers within a customer data center turn off because of overheating. You have an air
conditioning specification and want to compare this information with the amount of heat generated
by the servers.
Which HP tool provides this information?
A. Product Bulletin
B. Power Calculator
C. Data Center Sizer
D. Performance Quick Reference Tool (PQRT)
Answer: B

certification HP   HP2-K01   HP2-K01 examen   HP2-K01

NO.23 A customer wants to install five full-height blade servers into a c-Class enclosure that is running
N+N power supply redundancy mode.
How many power supplies are required to support this configuration?
A. 3
B. 4
C. 5
D. 6
Answer: D

certification HP   HP2-K01   HP2-K01   HP2-K01   HP2-K01 examen

NO.24 Which ProLiant Essentials Foundation Pack CD can run the Array Diagnostic Utility (ADU)?
A. Diagnostic CD
B. SmartStart CD
C. Management CD
D. Firmware Maintenance CD
Answer: B

HP   certification HP2-K01   certification HP2-K01   HP2-K01   HP2-K01 examen

NO.25 During which portion of the HP Troubleshooting Methodology do you carefully observe and record
the results of each step including any error messages or changes in functionality?
A. Step 1 - Collect data
B. Step 3 - Develop the action plan
C. Step 4 - Execute the action plan
D. Step 6 - Implement preventative measures
Answer: C

HP   certification HP2-K01   HP2-K01

NO.26 You are installing a new InifiniBand Mezzanine card into a customer's BL480c server blade. The
mezzanine card is installed into mezzanine slot 2.
Which interconnect location must the InifiniBand controller be installed into?
A. bays 3-4
B. bays 5-6
C. bays 7-8
D. Placement of the controller does not matter. The Onboard Administrator will properly map
theInifiniband mezzanine card to the installed Infiniband Interconnect.
Answer: B

certification HP   certification HP2-K01   HP2-K01 examen   HP2-K01 examen

NO.27 Your customer requires software that will help keep HP software and drivers installed on c-Class
blade servers up-to-date. They want a low-cost solution.
What should you recommend to this customer? (Select two)
A. HP Client Manager
B. HP Virtualization Software
C. Version Control Agent (VCA)
D. Version Control Repository Manager (VCRM)
E. Vulnerability and Patch Management Pack (VPM)
Answer: C,D

HP   HP2-K01   HP2-K01   HP2-K01

NO.28 Which item is required to power on and troubleshoot a single p-Class blade server that has been
removed from its enclosure?
A. Diagnostic Station and adapter
B. Server Blade Management Module
C. Integrated Lights-Out remote console
D. You cannot power on and troubleshoot a p-Class blade that has been removed from its
enclosure
Answer: A

HP examen   HP2-K01   HP2-K01 examen   HP2-K01 examen

NO.29 Which HP StorageWorks arrays can be used with the HP BladeSystem c-Class? (Select two.)
A. MSA 20
B. MSA 30
C. MSA 500
D. MSA 1000
E. MSA 1500cs
Answer: D,E

HP   HP2-K01   HP2-K01   HP2-K01 examen

NO.30 You added an interconnect switch in an HP BladeSystem c-Class and the switch does not power
up. What should you check? (Select three.)
A. interconnect type and location
B. position of the mezzanine cards
C. position of the power supplies in the enclosure
D. status of the first full-height server blade in the enclosure
E. enclosure and switch status in the Onboard Administrator
F. whether interconnect bay has been activated for the bay the switch is in
Answer: A,B,E

HP   HP2-K01 examen   HP2-K01 examen   HP2-K01   HP2-K01 examen

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test HP HP2-K01 est une bonne examination. Mais c'est difficile à passer le test HP HP2-K01. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

2013年7月25日星期四

Pass4Test offre de HP HP2-K01 HP2-E14 HP2-E13 HP0-J38 HP0-A25 HP0-Y23 matériaux d'essai

Pass4Test est un catalyseur de votre succès de test HP HP2-K01 HP2-E14 HP2-E13 HP0-J38 HP0-A25 HP0-Y23. En visant la Certification de HP, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test HP HP2-K01 HP2-E14 HP2-E13 HP0-J38 HP0-A25 HP0-Y23, la Q&A HP HP2-K01 HP2-E14 HP2-E13 HP0-J38 HP0-A25 HP0-Y23 est un bon choix pour vous.


Choisissez le Pass4Test, choisissez le succès de test HP HP2-K01 HP2-E14 HP2-E13 HP0-J38 HP0-A25 HP0-Y23. Bonne chance à vous.


Code d'Examen: HP2-K01

Nom d'Examen: HP (Servicing HP BladeSystem)

Questions et réponses: 126 Q&As

Code d'Examen: HP2-E14

Nom d'Examen: HP (HP Service Sales Professional)

Questions et réponses: 60 Q&As

Code d'Examen: HP2-E13

Nom d'Examen: HP (Selling HP Enterprise Solutions)

Questions et réponses: 82 Q&As

Code d'Examen: HP0-J38

Nom d'Examen: HP (Designing and Implementing HP Enterprise Backup Solutions)

Questions et réponses: 85 Q&As

Code d'Examen: HP0-A25

Nom d'Examen: HP (NonStop SQL/MX)

Questions et réponses: 78 Q&As

Code d'Examen: HP0-Y23

Nom d'Examen: HP (Deploying HP ProCurve Products )

Questions et réponses: 65 Q&As

La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test HP HP2-K01 HP2-E14 HP2-E13 HP0-J38 HP0-A25 HP0-Y23.


Pass4Test est un bon site d'offrir la facilité aux candidats de test HP HP2-K01 HP2-E14 HP2-E13 HP0-J38 HP0-A25 HP0-Y23. Selon les anciens test, l'outil de formation HP HP2-K01 HP2-E14 HP2-E13 HP0-J38 HP0-A25 HP0-Y23 est bien proche de test réel.


HP0-Y23 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y23.html


NO.1 Which options are available at the following prompt in the CLI of an HP ProCurve 3500yl switch?
(Select three.)
3500yl-24G#
A.enable IP routing
B.update switch software
C.disable ports
D.erase startup configuration
E.define management passwords
F.restart the switch
G.assign IP address to VLAN interface
Answer: BDF

certification HP   HP0-Y23   HP0-Y23 examen   HP0-Y23

NO.2 You must configure an IP interface for VLAN 22 on an HP ProCurve switch. Besides the IP address,
which parameter is required?
A.subnet mask
B.DNS server
C.default gateway
D.port members
Answer: A

certification HP   HP0-Y23 examen   certification HP0-Y23   certification HP0-Y23

NO.3 You must define a hostname on an HP ProCurve 5406zl switch. Which configuration context must you
enter to perform this task?
A.interface
B.global configuration
C.manager
D.operator
Answer: B

certification HP   certification HP0-Y23   HP0-Y23

NO.4 Which privilege level is indicated by the following prompt at the CLI of an HP ProCurve switch?
3500yl-24G>
A.operator
B.interface
C.global configuration
D.manager
Answer: A

HP examen   HP0-Y23   certification HP0-Y23   certification HP0-Y23

NO.5 What is the effect of the following command issued at the CLI of an HP ProCurve 5406zl switch?
5406zl# configure terminal
A.The CLI moves to the global configuration context.
B.The CLI provides an interface for configuring persistent terminal variables such as line length.
C.The CLI displays user input in the terminal.
D.The CLI displays current configuration parameters.
Answer: A

certification HP   certification HP0-Y23   HP0-Y23

NO.6 What can be used as a destination when backing up the configuration on an HP ProCurve 3500yl
switch? (Select two.)
A.TFTP server
B.compact flash
C.neighboring switch
D.USB flash drive
E.FTP server
Answer: AD

HP   certification HP0-Y23   HP0-Y23   HP0-Y23

NO.7 What is the effect of the following command entered at the CLI of an HP ProCurve switch with factory
default settings?
ProCurveSwitch# exit
A.All switch ports are enabled.
B.The user is logged out of the CLI.
C.The privilege level moves from Manager to Operator.
D.The CLI displays an authentication prompt.
Answer: C

certification HP   HP0-Y23 examen   HP0-Y23 examen   HP0-Y23

NO.8 Besides the CLI, which configuration interface enables an administrator to configure a user name for
access to the Manager privilege level on an HP ProCurve switch?
A.menu interface
B.web interface
C.setup interface
D.Management Interface Wizard
Answer: B

HP   HP0-Y23 examen   certification HP0-Y23   HP0-Y23

NO.9 You must configure an HP ProCurve 3500yl switch for installation in a network that uses RSTP to form
a single-instance Spanning Tree. What must you do to ensure that the 3500yl will participate in this
Spanning Tree?
A.Enter spanning-tree in the global configuration context.
B.Enter spanning-tree rstp in the configuration context for every VLAN the switch shares with another
switch.
C.Enter spanning-tree protocol-version rstp in the Spanning Tree configuration context.
D.Enter spanning-tree autodetect in the configuration context of every port where the switch will hear
Spanning Tree BPDUs.
Answer: A

certification HP   certification HP0-Y23   HP0-Y23   certification HP0-Y23

NO.10 You must configure an IP interface on an HP ProCurve switch. Which CLI context will enable you to
perform this task?
A.router
B.manager
C.CLI passthrough
D.VLAN
Answer: D

HP   HP0-Y23 examen   HP0-Y23