Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.
Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de HP après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
On peut voir que beaucoup de candidats ratent le test HP HP0-P10 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test HP HP0-P10 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test HP HP0-P10, Pass4Test peut offrir les Q&As des autres test Certification IT.
Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test HP HP0-P10. Ajoutez la Q&A au panier.
Il demande les connaissances professionnelles pour passer le test HP HP0-P10. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat HP HP0-P10, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
Code d'Examen: HP0-P10
Nom d'Examen: HP (HP Integrity Server Multi-OS Installation and Deployment)
Questions et réponses: 147 Q&As
C'est sûr que le Certificat HP HP0-P10 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test HP HP0-P10, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat HP HP0-P10 peut bien tester la professionnalité de IT.
HP0-P10 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-P10.html
NO.1 The diagnostic panel on an Integrity rx4640 shows a fan failure. What information on the Management
Processor (MP) shows you when the fan failed?
A. MP:CM> PS
B. MP:CM> SS
C. MP> SL --> L - Live Events
D. MP> SL --> E - System Event
Answer: D
HP HP0-P10 examen HP0-P10 HP0-P10
NO.2 The rx3600 and rx6600 have LEDs which show the FRU Health status. How can you view the state of
these LEDs remotely?
A. From the MP main menu, select VFP
B. From the MP main menu, select SL
C. From the MP main menu, select CM, then LS
D. From the MP main menu, select CM, then DF
Answer: A
certification HP HP0-P10 HP0-P10 examen
NO.3 You must back up all your Integrity server NVRAM configurations. Which backup utility is available for
download that can be used in the EFI shell?
A. bcfg
B. getmtc
C. nvrambkp
D. bcknvram
Answer: C
HP examen HP0-P10 HP0-P10 certification HP0-P10 certification HP0-P10
NO.4 Which methods of accessing the Offline Diagnostics Environment (ODE) utilities does HP recommend?
(Select two.)
A. from the HP service partition
B. from the EFI Boot Menu
C. from the MP command menu
D. from the operating system disk
E. from the Offline Diagnostic Utility CD
Answer: AE
HP certification HP0-P10 HP0-P10 HP0-P10 certification HP0-P10
NO.5 Which Offline Diagnostics Environment (ODE) utility should you use to test processors on an Integrity
server?
A. WDIAG
B. IA64DIAG
C. CPUDIAG
D. PROCDIAG
Answer: C
HP HP0-P10 HP0-P10 certification HP0-P10
NO.6 From the EFI Boot Manager, how can you get information about the installed memory DIMMs?
A. Go to the EFI Shell and enter: info mem
B. It is not possible to get the information offline.
C. The information displays automatically at the EFI Boot Manager menu.
D. Go to the System Configuration menu and choose Memory Configuration.
Answer: A
HP examen certification HP0-P10 HP0-P10 HP0-P10 examen
NO.7 Which command do you use in the EFI Shell to verify that an Integrity rx4640 server has the latest
firmware?
A. openinfo fw
B. info fw
C. ver fw
D. sysrev
Answer: B
HP certification HP0-P10 certification HP0-P10 HP0-P10
NO.8 Which Offline Diagnostics Environment (ODE) utility should you use to test an HP Tachyon XL2 Fibre
Channel card?
A. IODIAG
B. FCDIAG
C. PERFVER
D. FCFUPDATE
Answer: A
HP certification HP0-P10 HP0-P10 HP0-P10 HP0-P10 examen
NO.9 What is the difference between a Machine Check Abort (MCA) and a Transfer of Control (TOC)?
A. An MCA is a software dump; a TOC is a hardware register dump.
B. An MCA is a hardware register dump; a TOC initiates a software dump.
C. An MCA dump is for Windows systems; a TOC is for HP-UX systems.
D. An MCA dump is for HP-UX systems; a TOC is for Windows systems.
Answer: B
HP certification HP0-P10 certification HP0-P10 certification HP0-P10
NO.10 Which Offline Diagnostics Environment (ODE) utility should you use to test the memory of an Integrity
server?
A. MAPPER
B. SYSDIAG
C. MEMDIAG
D. DIMMDIAG
Answer: C
HP examen certification HP0-P10 certification HP0-P10 HP0-P10 HP0-P10
NO.11 You replaced failed hardware in an HP Integrity server. Which steps should you perform to ensure
that the system is operational?
A. Verify that the replaced hardware is visible in the EFI Shell, and that the Diagnostic LEDs are clear.
B. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded.
C. From the EFI Shell, boot the system. From within the operating system, confirm that the replaced
hardware is functioning and verify the correct status of the Diagnostic LEDs.
D. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded. Then boot the system and confirm that the replaced hardware is functioning.
Answer: D
certification HP certification HP0-P10 HP0-P10 certification HP0-P10
NO.12 Which front panel LEDs on an Integrity rx2620 can indicate an error?
A. Locator LED and System LED
B. Power LED and Diagnostic LEDs
C. System LED and Diagnostic LEDs
D. Diagnostic LEDs and Locator LED
Answer: C
HP examen certification HP0-P10 certification HP0-P10 HP0-P10 HP0-P10
NO.13 The system is not responding normally. You have access to the Management Processor (MP). Which
command do you use to cycle the power?
A. ps
B. pc
C. rs
D. co
Answer: B
certification HP certification HP0-P10 HP0-P10 HP0-P10 HP0-P10 examen
NO.14 What does an amber blinking System LED on an Integrity rx2620 indicate?
A. System is in error state
B. Remote access is enabled
C. A system warning
D. Management Processor is powered off
Answer: C
certification HP HP0-P10 certification HP0-P10 HP0-P10
NO.15 You have limited access to the Management Processor (MP), but you have full access to the system
Baseboard Management Console (BMC). Which command do you issue in the BMC Command Line
Interface (CLI) to power off the system hardware?
A. cli> p 0
B. cli> rs 1
C. cli> pc 0
D. cli> loc 0
Answer: A
HP HP0-P10 certification HP0-P10
NO.16 You are managing an Integrity rx2620 server that is located in a remote office. Which Management
Processor (MP) console command do you use to gather the state of the system and LEDs?
A. LED
B. VFP
C. ERRDUMP D. SYSSTAT
Answer: B
HP examen HP0-P10 HP0-P10 certification HP0-P10
NO.17 Which capability does the Management Processor (MP) in the Integrity rx2620 server provide?
A. offline hardware monitoring
B. hardware administration and management
C. remote HP-UX operating system installation
D. remote monitoring of server room conditions
Answer: B
HP examen certification HP0-P10 HP0-P10
NO.18 How can you access the UUID on an entry-level HP Integrity server? (Select two.)
A. The UUID is written on the system information label of the server.
B. At the EFI Boot Manager menu, access the EFI Shell; then enter info sys.
C. At the Management Processor (MP) main menu, go to the Command Menu and enter id.
D. At the EFI Boot Manager menu, access the System Configuration menu and select System UUID.
E. If you access the EFI Boot Manager menu using integrated Lights-Out (iLO), the UUID displays
automatically.
Answer: AB
certification HP HP0-P10 HP0-P10 HP0-P10
NO.19 An Integrity rx2620 server with Windows Server 2003 is running terminal services but has stopped
responding. Which MP command do you use to shut down gracefully and power off the server?
A. rs -g
B. pc -g
C. rs -off
D. pc -off
Answer: B
HP HP0-P10 certification HP0-P10 HP0-P10 examen HP0-P10 examen
NO.20 In a Linux environment, what is one of the components used to manage highly available solutions
offered by Virtual Server Environment (VSE)?
A. HP Workload Manager
B. HP OpenView Node Manager
C. HP Global Workload Manager
D. Performance Management Pack
Answer: C
HP examen certification HP0-P10 certification HP0-P10 HP0-P10
NO.21 You need to perform a maintenance task on a Management Processor module. Which command
displays a list of connected users?
A. who
B. list
C. usmgr
D. show user
Answer: A
HP HP0-P10 HP0-P10 HP0-P10 HP0-P10
NO.22 Which Management Processor (MP) command displays the physical location information of the
system?
A. SI
B. ID
C. LOC
D. SO
Answer: B
certification HP HP0-P10 examen HP0-P10 HP0-P10 certification HP0-P10 certification HP0-P10
NO.23 Which command in the iLO 2 controls access permissions for an Integrity rx6600 server?
A. PS
B. SO
C. PC
D. SD
Answer: B
HP HP0-P10 HP0-P10 examen certification HP0-P10 HP0-P10
NO.24 Where is the diagnostic panel on an Integrity rx4640 server located?
A. top
B. front
C. back
D. left side
E. right side
Answer: A
HP examen certification HP0-P10 certification HP0-P10
NO.25 You want to load new firmware for the Management Processor (MP). Which command do you use to
verify a proper connection to an FTP server?
A. xd
B. bin
C. scp
D. xu
Answer: A
certification HP HP0-P10 HP0-P10 HP0-P10 examen HP0-P10 examen HP0-P10
NO.26 How can you determine the firmware version that is running on an HP Integrity system? (Select two.)
A. At the EFI Boot Manager menu, open the EFI shell and enter info fw.
B. At the MP main menu, open the Command Menu (cm) and enter firmware.
C. At the EFI Boot Manager menu, go to the Firmware menu and select Version.
D. At the EFI Boot Manager menu, go to the Firmware Configuration menu and select Version.
E. If you access the EFI Boot Manager menu using iLO, the firmware versions display automatically.
Answer: AE
HP examen HP0-P10 HP0-P10 examen HP0-P10 HP0-P10 certification HP0-P10
NO.27 You just installed an Integrity rx2620 server. How do you set the MP and system times?
A. Use the MP date command to set time and date.
B. The time will be set automatically during system boot.
C. Use the EFI shell command time to set time and date of the MP.
D. Use the MP date command to set the date, and use the MP time command to set the time.
Answer: C
HP HP0-P10 certification HP0-P10 certification HP0-P10 certification HP0-P10
NO.28 Where does HP OpenVMS store all error information?
A. /var/adm/syslog/syslog.log
B. SYS$ERRLOG:SYSTEM.LOG
C. SYS$ERRORLOG:ERRLOG.SYS
D. SYS$MANAGER:OPERATOR.LOG
Answer: C
HP HP0-P10 examen HP0-P10 examen HP0-P10 certification HP0-P10 HP0-P10
NO.29 After you replace a memory module on an Integrity server, how do you clear the entries in the Page
Deallocation Table (PDT)?
A. Interrupt the boot, go to the Service Menu and enter pdt clear.
B. Interrupt the boot, go to the EFI shell, and then enter pdt clear.
C. Interrupt the boot, enter the MP:CM> CL command, and choose PDT.
D. After reboot, the system automatically deletes entries in the PDT without user input.
Answer: B
certification HP HP0-P10 examen HP0-P10 examen
NO.30 You have run an Offline Diagnostics Environment (ODE) utility. What should you do before booting
the operating system or running any non-ODE utility?
A. Reset the system at the MP:CM> prompt.
B. Use the MP:CM> poff command to power off the DC voltage.
C. Reset the system at the EFI shell prompt and disconnect the AC power for one minute.
D. Reset the system at the EFI shell prompt, use the MP:CM> pc command to power off DC voltage, and
disconnect the AC power for one minute.
Answer: A
HP HP0-P10 examen HP0-P10 certification HP0-P10 HP0-P10 examen
Le Certificat HP HP0-P10 est un passport rêvé par beaucoup de professionnels IT. Le test HP HP0-P10 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test HP HP0-P10. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test HP HP0-P10 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A HP HP0-P10 pour prendre un essai.
