2013年11月19日星期二

Le matériel de formation de l'examen de meilleur Network General 1T6-220

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Network General 1T6-220 dans Pass4Test pour se former avant le test Network General 1T6-220.

Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Network General 1T6-220 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Network General 1T6-220 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Network General 1T6-220.

Le test Certification Network General 1T6-220 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Network General 1T6-220. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Network General 1T6-220.

Le programme de formation Network General 1T6-220 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Code d'Examen: 1T6-220
Nom d'Examen: Network General (Switched Ethernet Network Analysis and Troubleshooting)
Questions et réponses: 143 Q&As

1T6-220 Démo gratuit à télécharger: http://www.pass4test.fr/1T6-220.html

NO.1 _____ needs to be configured on the switch port you are monitoring or all Detail tab fields will return NA.
A.SNMP
B.RMON
C.MIB
D.802.11b
Answer:B

certification Network General   certification 1T6-220   1T6-220 examen   certification 1T6-220

NO.2 The Sniffer may identify frames affected by a rogue node or bad port as __________.
A.CRC errors
B.Oversize frames
C.Undersize frames
D.Late collisions
Answer:D

Network General examen   1T6-220   1T6-220   1T6-220 examen

NO.3 Legal collisions in Ethernet occur within the first _____ of data.
A.32 bits
B.64 bits
C.256 bits
D.512 bits
Answer:D

Network General   1T6-220   certification 1T6-220   1T6-220

NO.4 When a network is displaying excessive propagation delay problems, the corruption in the frame is
random, but typically seen before the _______.
A.64th bit
B.64th byte
C.32nd bit
D.32nd byte
Answer:B

Network General examen   1T6-220 examen   1T6-220   1T6-220   certification 1T6-220

NO.5 Port mirroring can be set from the Sniffer Portable only if the switch supports it and the switch is
configurable via ______.
A.IOS
B.SPAN
C.SNMP requests
D.802.1
Answer:C

Network General   1T6-220   1T6-220   1T6-220

NO.6 When a network is displaying _______ problems, the frames are the right size, but have incorrect data
with CRC errors. The Sniffer will show Physical Errors as symptoms or diagnoses.
A.Excessive propagation delay
B.Legal collision
C.Signal reflection
D.Electrical noise
Answer:D

certification Network General   1T6-220 examen   1T6-220 examen   1T6-220

NO.7 Collisions are always eliminated in __________ environments.
A.Switched Ethernet
B.Full Duplex
C.Gigabit Ethernet
D.All of the above
Answer:B

Network General   1T6-220   1T6-220 examen   certification 1T6-220

NO.8 CSMA/CD stands for:
A.Collision Sense, Multiple Access, Carrier Detection
B.Carrier Sense, Multiple Access, Collision Detection
C.Carrier Sense, Multiplexed Access, Collision Detection
D.Collision Sense, Multiple Access, Collision Detection
Answer:B

certification Network General   1T6-220   1T6-220   certification 1T6-220   1T6-220 examen

NO.9 Because Gigabit Ethernet can generate up to 125 Mbytes of data per second at full capacity it is
important to __________ when starting to analyze a network problem.
A.Capture data for one minute and then analyze the Expert symptoms
B.Apply a capture filter for a specific station or conversation
C.Capture data directly to disk
D.Increase the Expert thresholds before capturing data
Answer:B

certification Network General   1T6-220   1T6-220   1T6-220   1T6-220

NO.10 The Gigabit Ethernet Sniffer user interface uses the standard Sniffer interface with enhancements for
Gigabit.
A.True
B.False
Answer:A

Network General   1T6-220   certification 1T6-220   1T6-220 examen   1T6-220

NO.11 Ethernet frames that do not end on an 8 bit boundary:
A.Are jabbers
B.Are runt frames
C.Have CRC errors
D.Have alignment errors
Answer:D

certification Network General   1T6-220   certification 1T6-220

NO.12 When receiving an incoming frame, a station in either half-duplex or full-duplex mode will __________.
A.Check for the maximum frame size of 64 bytes
B.Perform collision detection
C.Truncate the frame after 1518 bytes
D.Validate the FCS
Answer:D

certification Network General   certification 1T6-220   1T6-220 examen

NO.13 Consider the following description: Only part of a frame has arrived at the adapter when the first part
begins transmission on the media. The adapter quits sending the frame, leaving an incomplete frame
transmitted. This is likely a(n):
A.IRQ setting problem
B.Normal occurrence with any Ethernet adapter
C.TCP timer problem
D.Fast Transmit Adapter issue
Answer:D

Network General   1T6-220 examen   1T6-220 examen   1T6-220   1T6-220 examen

NO.14 A duplex mismatch between a switch port and an end node will typically result in ____________.
A.Total loss of communications
B.Fall back to half-duplex mode
C.Increased broadcast traffic
D.Excessive collisions
Answer:D

Network General   1T6-220   1T6-220 examen   1T6-220 examen

NO.15 The IEEE 802.3x specification describes the operation of:
A.Fast Ethernet
B.Switched Ethernet
C.Gigabit Ethernet
D.Full Duplex Ethernet
Answer:D

Network General   1T6-220 examen   1T6-220 examen   1T6-220   1T6-220

NO.16 The maximum cable distances for Full Duplex Ethernet are ________ compared to Half Duplex
Ethernet:
A.Much higher
B.The same
C.Much lower
D.Slightly higher
Answer:A

Network General examen   1T6-220 examen   1T6-220 examen   1T6-220

NO.17 The Sniffer History Samples reports are especially useful for long term reporting of __________.
A.Slow response time problems
B.Identifying high rates of collisions and CRC errors
C.Combining multiple criteria for baseline reporting
D.All of the above
Answer:D

certification Network General   1T6-220   1T6-220   certification 1T6-220

NO.18 The _______ always has an Ethertype of 8808.
A.PAUSE MAC frame
B.Buffer MAC frame
C.JAM-PAUSE frame
D.STOP MAC frame
Answer:A

certification Network General   certification 1T6-220   1T6-220   certification 1T6-220

NO.19 Choose all that apply. Which of the following functions are performed in a Full-duplex Ethernet
environment?
A.Carrier sense before transmitting
B.Maintain an inter-frame gap between frames
C.Perform CRC calculation on transmitted frame
D.Back off and retransmit when a collision occurs
Answer:B C

Network General examen   certification 1T6-220   1T6-220 examen   certification 1T6-220

NO.20 Choose all that apply. The Gigabit Ethernet Sniffer can be configured to store data in the __________
buffer during capture.
A.Adapter Buffer
B.Capture Buffer
C.Jitter Buffer
D.All of the above
Answer:A B

Network General examen   certification 1T6-220   certification 1T6-220   1T6-220   1T6-220

Pass4Test est un bon site d'offrir la facilité aux candidats de test Network General 1T6-220. Selon les anciens test, l'outil de formation Network General 1T6-220 est bien proche de test réel.

没有评论:

发表评论