Votre vie changera beaucoup après d'obtenir le Certificat de EMC E20-520. Tout va améliorer, la vie, le boulot, etc. Après tout, EMC E20-520 est un test très important dans la série de test Certification EMC. Mais c'est pas facile à réussir le test EMC E20-520.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification EMC E20-520. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test EMC E20-520 est une bonne examination. Mais c'est difficile à passer le test EMC E20-520. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test EMC E20-520. Cet outil de formation est convenable pour les candidats de test EMC E20-520. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.
Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test EMC E20-520, la voie à la réussite de votre professionnel sera ouverte pour vous.
Code d'Examen: E20-520
Nom d'Examen: EMC (Calriion solutions specialist exam)
Questions et réponses: 520 Q&As
Pass4Test possède un l'outil de formation particulier à propos de test EMC E20-520. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation EMC E20-520 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.
E20-520 Démo gratuit à télécharger: http://www.pass4test.fr/E20-520.html
NO.1 Which object would maintain the changes to a source LUN in the event a MirrorView/S configuration
suffered a link outage followed by an SP trespass?
A.Metavolume
B.Fracture log
C.Write intent log
D.Clone private LUN
Answer:C
EMC E20-520 E20-520 examen E20-520 E20-520
NO.2 What makes sizing of the reserved LUN pool a non-trivial task?
A.Reserved LUNs are assigned to specific source LUNs when the CLARiiON is laid out.
B.Source LUNs can be different sizes and only write to LUNs of the same size.
C.Reserved LUN pools may be different sizes and allocation to source LUNs is based on the next
available reserved LUN.
D.There are 512 reserved LUNs in all CLARiiON models while there may be many more source LUNs.
Answer:C
certification EMC E20-520 examen E20-520 examen
NO.3 A customer intends to use clones in their environment. They are concerned about the usability of clone
data.They ask about the result of removing a clone from a clone group.Which statement describes the
result of that operation?
A.Clone LUN may be used for reverse-synchronization operations.
B.Clone LUN may be used for synchronization operations.
C.Data on the clone LUN is flagged in the clone private LUN.
D.Data on the clone LUN is not affected and may be used by a host.
Answer:D
EMC examen E20-520 examen certification E20-520 E20-520
NO.4 If a customer wants to present a secondary image LUN of a MirrorView/S mirror set to a host, what
must they do first?
A.The primary image must be removed from the mirror set.
B.The secondary image must be placed in the host storage group.
C.The secondary image must be removed from the mirror set or the secondary image promoted to a
primary image.
D.The secondary image must be fractured from the mirror set or the secondary image promoted to a
primary image.
Answer:C
certification EMC E20-520 E20-520
NO.5 What does the fracture log allow?
A.Incremental resynchronization of data
B.Creation of markers for each modified track
C.Capture of persistency errors from the source to target
D.Connectivity failures from both directions
Answer:A
certification EMC E20-520 E20-520 E20-520 E20-520
NO.6 Should a SnapView session stop automatically, what will happen to the running sessions?
A.All sessions pointing to the clone will fail over to SP B and continue to write.
B.All sessions running on the source LUN will be terminated.
C.Host buffers will be flushed and sessions restarted.
D.All memory mapping entries will be saved to the COFW log.
Answer:A
EMC E20-520 certification E20-520
NO.7 Which best describes the MirrorView/A replication process?
A.A write is received, tracked in the SAN Copy delta set mechanism, transmitted to the secondary array.
B.A write is received, tracked in the fracture log, transmitted to the secondary array.
C.A write is received, tracked in the SnapView private LUN, transmitted to the secondary array.
D.A write is received, tracked in the write intent log, transmitted to the secondary array.
Answer:A
EMC E20-520 E20-520 examen E20-520
NO.8 Which device is enabled by default when creating a mirror set in a MirrorView/S environment on a
CX4-120 with FLARE 28?
A.Write intent log
B.Reserved LUN pool
C.Secondary Image
D.Clone private LUN
Answer:B
EMC examen E20-520 E20-520 E20-520 examen
NO.9 Which statement applies when the Protected Restore option is enabled on a clone?
A.Once the reverse synchronization is complete, the clone is fractured.
B.All SnapView sessions on the source LUN must be stopped.
C.A clone cannot be marked "dirty" before starting a reverse synchronization.
D.When reverse synchronization is in process, no writes are allowed to the source LUN or clone.
Answer:A
EMC certification E20-520 E20-520 examen E20-520
NO.10 What is the process for flagging source LUNs?
A.Snapshots are created, changing the LUN's state.
B.Via GUI interface or CLI the state change bit is switched.
C.The PSM LUN is set to "source."
D.Via Navisphere Analyzer the FLARE LUN is changed to a PSM LUN.
Answer:A
EMC E20-520 E20-520
NO.11 The primary image of a MirrorView/S mirror set has trespassed from SPA to SPB on the primary
array.Which SP now owns the secondary image?
A.ALUA determines ownership
B.SPA on the secondary array
C.Neither SPA or SPB
D.SPB on the secondary array
Answer:D
certification EMC certification E20-520 E20-520 examen E20-520
NO.12 Which statement describes the operation of the reserved LUN pool?
A.LUN IDs of reserved LUNs in the reserved LUN pool can only be between 2048 and 4096.
B.All reserved LUNs must be the same size, on FC disks, and have the same RAID type.
C.Separate reserved LUN pools are required for SnapView, Incremental SAN Copy, and MirrorView/A.
D.Reserved LUN pool is shared between SnapView, Incremental SAN Copy, and MirrorView/A.
Answer:D
certification EMC E20-520 E20-520 E20-520 examen E20-520
NO.13 A storage administrator wants to use a point-in-time copy of a production LUN for testing and possibly
keep any changed data from that copy. The administrator's goal is to minimize the performance impact on
the production LUN as well as use the point-in-time copy for restoring their data.What is the extent size for
this LUN?
A.Use a clone and promote it as needed
B.Use a clone and reverse-synchronize as needed
C.Use a snapshot of a clone and roll back as needed
D.Use a snapshot and deactivate command to make changes permanent on the production LUN
Answer:B
EMC examen E20-520 E20-520
NO.14 What CLARiiON is needed to meet a customer's requirement for their MirrorView/S environment that
will have 50 consistency groups?
A.CX4, FLARE 22
B.CX4, FLARE 28
C.CX3, FLARE 26
D.CX3, FLARE 28
Answer:B
EMC certification E20-520 certification E20-520
NO.15 What happens when a snapshot is deactivated?
A.The snapshot becomes inaccessible to the primary host.
B.The SnapView session ends.
C.The snapshot becomes inaccessible to the secondary host.
D.All metadata is removed from the SP.
Answer:C
EMC E20-520 examen E20-520 certification E20-520 certification E20-520
NO.16 A storage administrator tries to create a clone group on a CLARiiON CX4 and receives an error
message that stops the clone group from being created.What could be a possible cause?
A.MirrorView has not been configured.
B.Population latency has not been configured.
C.No CPLs have been allocated.
D.No reserved LUNs have been allocated.
Answer:C
EMC examen E20-520 E20-520 certification E20-520 E20-520
NO.17 During normal MirrorView/S operations, Navisphere Manager permits host access to how many
secondary images?
A.0
B.1
C.2
D.4
Answer:A
EMC examen certification E20-520 E20-520
NO.18 A customer starts four SnapView sessions on a source LUN. The sessions are scheduled to start at
8:00 A.M., 12:00 P.M., 4:00 P.M., and 8:00 P.M. At 5:15 P.M. the reserved LUN pool runs out of
space.What will happen next?
A.Most recently allocated reserved LUN will be released.
B.Reserved LUN allocated first will be released.
C.Space used by all sessions on the source LUN will be released.
D.Space used by the session that performed the most recent write will be released.
Answer:D
certification EMC E20-520 certification E20-520 E20-520 examen
NO.19 The number and size of SnapView pointers have reached memory allocation. What will take place to
adjust to this situation?
A.Pointers will be paged to the reserved LUN as required.
B.128 KB memory chunks will be added until the memory usage has been satisfied.
C.Pointers will be paged to and from the reserved LUN as required in 512 KB chunks.
D.An additional reserve LUN will be required.
Answer:C
EMC examen E20-520 E20-520 E20-520 examen
NO.20 In a MirrorView/S environment, a primary image is owned by SPA on the primary array. Which SP must
own the secondary image on the secondary array within the same mirror set?
A.Either SP on the secondary array
B.SPB on the secondary array
C.SPA on the secondary array
D.It is marked as a private LUN on the secondary array
Answer:C
EMC E20-520 examen certification E20-520 E20-520 examen
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test EMC E20-520 à se preuver. Mais le taux du succès et bien bas. Participer le test EMC E20-520 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
没有评论:
发表评论