En quelques années, le test de certification de Nortel 920-362 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Nortel 920-362? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification 920-362. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification 920-362, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.
Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Nortel 920-362. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de 920-362, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.
Si vous êtes intéressé par l'outil formation Nortel 920-362 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.
Le test Certificat Nortel 920-362 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Nortel 920-362. Vous allez prendre toutes essences du test Nortel 920-362 dans une courte terme.
Code d'Examen: 920-362
Nom d'Examen: Nortel (Notel 920-362)
Questions et réponses: 60 Q&As
Vous pouvez télécharger tout d'abord une partie de Q&A Certification Nortel 920-362 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Nortel 920-362. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Nortel 920-362, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.
Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Nortel 920-362 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.
920-362 Démo gratuit à télécharger: http://www.pass4test.fr/920-362.html
NO.1 From which two parts is the Fully Qualified Domain Name (FQDN) composed and in what order must
they be configured?
A.first the host name and then the domain name
B.first the domain name and then the host name
C.first the COTS server IP address and then the port number
D.first the COTS server port number and then the IP address
Answer:A
Nortel 920-362 examen 920-362 certification 920-362
NO.2 A Communication Server (CS) 1000E Rls. 6.0 customer opened a trouble ticket that a newly installed
system with SIP Line Gateway cannot place calls to an existing 5.x site. After investigating the problem
you isolate the problem to the SIP Line Gateway settings. Which SIP Line Gateway Setting is most likely
to block calls between the two sites?
A.Security Policy - Security Disabled
B.Security Policy - Best Effort
C.Security Policy - Secure Local
D.Security Policy - Secure End-to-End
Answer:D
Nortel examen 920-362 920-362 examen
NO.3 A customer with a Communication Server (CS) 1000E Rls. 6.0 SA Co-Res system is experiencing an
Element Manager issue where the page cannot be displayed to the users. In order to resolve this problem
you decide to reboot the Element Manager. The CPPM Co-Res server has the following deployed
applications. Call Server, Signaling Server, Element Manager, and Network Routing Service. Which
option allows for the least service interruption when restarting the Signaling Server application?
A.Restart the Signaling Server application via Element Manager - Maintenance.
B.Restart the Signaling Server application by pressing the INI button on the CPPM server.
C.Restart the Signaling Server application by pressing the RST button on the CPPM server.
D.Restart the Signaling Server application by logging into the Base Manager and restarting Jboss.
Answer:A
Nortel 920-362 certification 920-362
NO.4 A customer purchased a Media Gateway (MG) 1000B Rls. 6.0 system to add to an existing
Communication Server (CS) 1000 Rls. 6.0 system. Which statements regarding the hardware
components within a release 6.0 Branch Office are true? (Choose two.)
A.The MG 1000B supports Co-Res and SIP Line Gateway on separate physical servers.
B.The MG 1000B supports Co-Res and Signaling Server Gateway on the same physical server.
C.The MG 1000B supports a redundant Co-Res Call Servers.
D.The MG 1000B supports Co-Res and SIP Line Gateway on the same physical server.
Answer:A B
certification Nortel 920-362 certification 920-362 certification 920-362 920-362
NO.5 A Communication Server (CS) 1000E Rls. 6.0 customer site has both Signaling Server Gateway and
SIP Line Gateway up communicating with the CS 1000 Call Server Which statement is true regarding the
configuration similarities between the Signaling Server Gateway and SIP Line Gateway?
A.They each load-balance the registration of IP telephones.
B.They both require separate Zone-based configuration for codec selection.
C.They both use virtual TNs.
D.They each require Application Module Link configuration.
Answer:C
Nortel 920-362 examen 920-362 certification 920-362
NO.6 A customer with a newly installed Communication Server (CS) 1000E Rls. 6.0 SA Co-Res is reporting
dropped calls between the two campus sites. You suspect the call server is not terminating the call and
decide to login and review the configuration and collect the logs from the active Call Server. Which CS
1000E hardware component will you access to verify the configuration and review the logs?
A.Co-resident Call and Signaling Server running on Dell R300 server
B.Co-resident Call and Signaling Server running on HP DL320 server
C.Co-resident Call and Signaling Server running on IBM x3550 server
D.Co-resident Call and Signaling Server running on CPPM server
Answer:D
certification Nortel 920-362 920-362 920-362 920-362
NO.7 A customer is planning to deploy a multi-site Communication Server (CS) 1000E network with a UCM
Security Domain that includes a Primary Security Server and a Backup Security Server. Which
statements regarding the Backup Security Server are true? (Choose two.)
A.It manages authorization requests when the Primary is not available.
B.It manages configuration changes when the Primary is not available.
C.It manages authentication requests when the Primary is not available.
D.It issues certificates to servers when the Primary is not available.
Answer:A C
certification Nortel 920-362 certification 920-362 920-362 examen
NO.8 A customer is installing a Communication Server (CS) 1000E Rls. 6.0 System with Unified
Communications Management. The Linux base software has been installed and the CPPM Co-Resident
Call Server and Signaling server has been configured as a member server within an existing CS 1000 Rls
6.0 security domain. Which statement describes the process the administrator must use to deploy
applications to the CPPM Co-Resident?
A.Log in to the UCM of the Primary Security Server and access the Base Manager to deploy.
B.Log in to the Base Manager and access local Deployment Manager to deploy.
C.Log in to the Base Manager and access central Deployment Manager to deploy.
D.Log in to the UCM of the Primary Security Server and access central Deployment Manager to deploy.
Answer:D
Nortel examen certification 920-362 920-362
NO.9 At a customer site, you installed a Communication Server (CS) 1000 Rls. 6.0 SA Co-Res system with
the following CS 1000 applications. Call Server, Signaling Server, Element Manager, Network Routing
Service Manager, and Subscriber Manager. Upon accessing Subscriber Manager, information regarding
the System ID is displayed on the screen and you're not able to navigate the Subscriber Manager web
page. Which task is required next before you can navigate and manage the Subscriber Manager
Application?
A.Copy and Paste the system ID information and create a new Subscriber Manager certificate within the
UCM Private Certificate Authority.
B.Copy and Paste the system ID information to the Nortel.com Keycode Retrieval System to generate a
license file.
C.Export the system ID as an XML file and distribute the file to the CS 1000 Element Managers as a
trusted application.
D.Export the system ID as an XML file and synchronize the file information with the customer's LDAP
server.
Answer:B
Nortel 920-362 examen certification 920-362 certification 920-362
NO.10 A customer that recently deployed a Communication Server 1000 Rls. 6.0 system with Unified
Communications Management would like to take advantage of the UCM log forwarding capability. Which
statement regarding UCM Logging Services is true?
A.Only Application logs can be forwarded to a Syslog server.
B.Only OAM and Security logs can be forwarded to a Syslog server.
C.Application, OAM and Security logs can all be forwarded to a Syslog server.
D.Only Security logs can be forwarded to a Syslog server.
Answer:B
Nortel certification 920-362 920-362
Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.
没有评论:
发表评论