Le meilleur matériel de formation examen Nortel 920-221

Pass4Test est un catalyseur de votre succès de test Nortel 920-221. En visant la Certification de Nortel, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Nortel 920-221, la Q&A Nortel 920-221 est un bon choix pour vous.

Le test Nortel 920-221 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.

Code d'Examen: 920-221
Nom d'Examen: Nortel (Nortel Convered Campus ERS Installation and Configuration)
Questions et réponses: 59 Q&As

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Nortel 920-221. Il n'y a pas de soucis à réussir le test avec une haute note.

920-221 Démo gratuit à télécharger: http://www.pass4test.fr/920-221.html

NO.1 If you do not know the IP address of an Ethernet Routing Switch 5510, how can you upload code?
A.Use Telnet.
B.Use Console Access.
C.Use the Web browser.
D.Use the Java Device Manager.
Answer:B

Nortel examen   certification 920-221   920-221

NO.2 You are using the Nortel Network Command Line Interface (NNCLI) to modify a VLAN or a port. Which
NNCLI command mode are you using?
A.Global Configuration Mode
B.Interface Configuration Mode
C.Privileged EXEC Mode
D.Router Configuration Mode
Answer:B

Nortel examen   920-221   920-221

NO.3 A customer would like to configure an IP address for an existing VLAN on an Ethernet Routing Switch
5510. You use the following Command Line Interface (CLI) command sequence: From the initial CLI
prompt, enter privilege mode, enter config mode, enter config-if mode for the VLAN interface. Enter the
command, "ip address". What information do you enter next?
A.Enter the appropriate IP address of the backup CPU.
B.Enter the appropriate IP address and subnet mask in dotted decimal notation.
C.Enter the appropriate IP address for the out-of-band management port.
D.Enter the appropriate IP address for the in-band management port.
Answer:B

Nortel examen   920-221   920-221 examen   920-221 examen   920-221   920-221 examen

NO.4 You can use the User Interface (UI) button on the Ethernet Routing Switch 5500 to temporarily reset a
switch to the default IP address. Which two statements are true about the default IP address set via the UI
button? (Choose two.)
A.The default IP address overrides the IP address currently in use by the switch stack.
B.The default IP address overwrites the onfigured IP address settings that are set via console, Command
Line Interface (CLI), or Web.
C.The default IP address changes if there is a change in the state of the switch, such as if the switch joins
or leaves a stack.
D.The default IP address is saved in NVRAM across resets of the switch/stack.
Answer:A C

certification Nortel   920-221   920-221   certification 920-221

NO.5 Which two statements are true about Power over Ethernet (PoE)? (Choose two.)
A.PoE requires a significant increase in power capacity.
B.PoE enables cooling systems and load-sharing power supplies.
C.PoE provides increased power, resiliency, and redundancy at low cost.
D.PoE is used to power IP telephones, Web cameras, and access points.
Answer:A D

certification Nortel   920-221   920-221   certification 920-221   certification 920-221   920-221

Finalement, la Q&A Nortel 920-221 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Nortel 920-221 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Nortel, vous aurez un meilleur salaire et une plus grande space à se développer.

Dernières Nortel 922-101 examen pratique questions et réponses

L'importance de la position de Certificat Nortel 922-101 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Nortel 922-101 par votre première fois.

Si vous faites toujours la lutte contre le test Nortel 922-101, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Nortel 922-101. Si vous avez déjà décidé à s'améliorer via Nortel 922-101, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Nortel 922-101 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Nortel 922-101 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Nortel 922-101.

Code d'Examen: 922-101
Nom d'Examen: Nortel (Communication Server 1000 Linux Platform Architecture)
Questions et réponses: 32 Q&As

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Nortel 922-101, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Nortel 922-101. Peut-être d'obtenir le Certificat Nortel 922-101 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Nortel 922-101 est une bonne examination. Mais c'est difficile à passer le test Nortel 922-101. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Nortel après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.

922-101 Démo gratuit à télécharger: http://www.pass4test.fr/922-101.html

NO.1 A customer is deploying a Communication Server (CS) Rls. 6.0 system. They plan to have a Dell R300
COTS configured as the Primary Security Server and a CPPM configured as a Backup Security Server.
Which statements regarding the roles of the Primary and Backup Security Server are true? (Choose two.)
A. You must have a Backup Security Server for the CS 1000 network.
B. The Backup Security Server is automatically promoted to Primary Security Server.
C. The Primary Security Server cannot be demoted to a member server.
D. The Backup Security Server automatically handles authentication requests when the Primary is down.
Answer: CD

certification Nortel   certification 922-101   922-101   922-101 examen   certification 922-101

NO.2 You have installed the Linux Base onto a Commercial Off the Shelf (COTS) server that will be
configured as a Member Server. You are ready to perform the Security Configuration. All LAN connections
are in place and functioning normally.
After connecting through a browser, what is your next step to perform the Security Configuration of this
COTS Member server?
A. Enter the IP address of the Certificate Authority in the address bar of the browser.
B. Enter the IP address of the Primary Security server in the address bar of the browser.
C. Enter the FQDN of the COTS Member server in the address bar of the browser.
D. Enter the FQDN of the Primary Security server in the address bar of the browser.
Answer: C

Nortel examen   922-101   922-101 examen

NO.3 A customer is deploying a Communication Server 1000 Rls. 6.0 High Availability system and would like
to know what options for Signaling Server functionality exist.
Which options can the customer deploy? (Choose two.)
A. CPPM VxWorks-based Signaling Server
B. CPPM Linux-based Signaling Server
C. COTS VxWorks-based Signaling Server
D. COTS Linux-based Signaling Server
Answer: BD

certification Nortel   922-101   certification 922-101   922-101   922-101

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Nortel 922-101 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Nortel 922-101 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Nortel 922-101.

Dernières Network Appliance NS0-111 de la pratique de l'examen questions et réponses téléchargement gratuit

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.

Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Network Appliance NS0-111. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Network Appliance NS0-111. Choisir le produit de Pass4Test particulier pour le test Certification Network Appliance NS0-111 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Network Appliance NS0-111 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Network Appliance NS0-111 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Network Appliance NS0-111 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Network Appliance NS0-111 juste avec la Q&A de Network Appliance NS0-111 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Network Appliance NS0-111 est une bonne examination. Mais c'est difficile à passer le test Network Appliance NS0-111. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

Pass4Test peut offrir la facilité aux candidats qui préparent le test Network Appliance NS0-111. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Network Appliance NS0-111 selon le résumé de test réel Network Appliance NS0-111. Vous pouvez réussir le test à la première fois sans aucune doute.

Code d'Examen: NS0-111
Nom d'Examen: Network Appliance (Network Appliance Storage Associate Exam)
Questions et réponses: 83 Q&As

NS0-111 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-111.html

NO.1 Which command would you use to display complete hardware information for a storage appliance?
A. vol status -v
B. sysconfig -v
C. sysstat
D. disk health -v
Answer: B

Network Appliance examen   NS0-111 examen   NS0-111   NS0-111 examen   NS0-111

NO.2 To recover a file from a snapshot using a UNIX client, what directory will a user look for?
A. snapshot
B. .snapshot
C. snap
D. ~snapshot
Answer: B

Network Appliance   NS0-111   NS0-111   certification NS0-111

NO.3 Choose the best way to minimize backup time.
A. Tape backup over the WAN connection
B. Utilizing a larger tape capacity
C. Organizing data in volumes and qtrees
D. Using multiple local tape drives
Answer: D

certification Network Appliance   NS0-111   NS0-111 examen

NO.4 What are the syntax differences between the aggr copy command options and the vol copy command
options?
A. Aggr copy commands are case-sensitive, but vol copy commands are not case sensitive.
B. Aggr copy options do not work at the command line.
C. Aggr copy options must be listed in alphabetical order.
D. None; the syntax for both options are the same.
Answer: D

Network Appliance   NS0-111   NS0-111   NS0-111

NO.5 To recover a file from a snapshot using a Windows client, what directory will a user look for?
A. snapshot
B. .snapshot
C. snap
D. ~snapshot
Answer: D

Network Appliance examen   NS0-111   NS0-111

NO.6 Which three actions can be performed with the restore command? (Choose 3)
A. View a list of files on tape.
B. Restore individual files and directories.
C. Restart a failed restore process.
D. Enter a number to specify how many filemarks should be skipped.
Answer: ABC

certification Network Appliance   certification NS0-111   NS0-111   NS0-111 examen

NO.7 You are performing a Data ONTAP upgrade and have loaded the system files onto the storage
appliance, and have
successfully issued the download command.
What is the next command you would enter to complete the upgrade procedure?
A. version
B. sysconfig -v
C. software
D. reboot
Answer: D

Network Appliance   NS0-111 examen   certification NS0-111   NS0-111   NS0-111 examen

NO.8 Which line describes a 50M tree quota for a qtree named "mydata" on volume "vol1"? Target Type
Disk Files Thold Sdisk Sfiles
A. /vol/vol1/mydata tree 50M -
B. /vol/vol1 steve@tree 50M -
C. steve tree@/vol/vol1 50M -
D. /vol/vol1 qtree/steve 50M -
Answer: A

certification Network Appliance   NS0-111   NS0-111

NO.9 Which volume option will disable automatic snapshot creation?
A. Setting the nosnap volume option to on
B. Turning off access to the .snapshot directory
C. Setting the nosnapdir option to on
D. Setting snap reserve to 0%
Answer: A

certification Network Appliance   NS0-111 examen   NS0-111   NS0-111 examen

NO.10 What two conditions should be verified prior to performing remote backups? (Choose 2)
A. The trust relationships between the source and the destination
B. That clustered failover is disabled
C. That rsh is enabled for remote access
D. That remote backup is enabled
Answer: AC

certification Network Appliance   NS0-111   NS0-111   NS0-111

NO.11 If there are problems with user quotas being misapplied, the following two files should be checked:
A. /etc/quotas and /etc/rc
B. /etc/quotas and /etc/usermap.cfg
C. /etc/rc and /etc/usermap.cfg
D. /etc/quotas and /etc/quotarules
Answer: B

Network Appliance examen   NS0-111 examen   NS0-111 examen   NS0-111 examen   NS0-111

NO.12 LUNs can be created using FilerView.
A. True
B. False
Answer: A

Network Appliance examen   NS0-111   NS0-111   certification NS0-111   NS0-111

NO.13 Please click the exhibit button.
Which of the commands from the special boot menu will zero disks and install a new file system?
A. (1) Normal boot.
B. (2) Boot without /etc/rc.
C. (3) Change password.
D. (4) Initialize all disks.
E. (5) Maintenance mode boot.
Answer: D

Network Appliance examen   NS0-111   certification NS0-111

NO.14 Which one of the following is a valid VLAN interface?
A. E3-9
B. E0
C. E3a
D. All of the above
Answer: A

certification Network Appliance   NS0-111 examen   certification NS0-111

NO.15 Which one of the following commands is used to modify network interfaces on the storage appliance?
A. ipconfig
B. ifconfig
C. interface
D. ipset
Answer: B

Network Appliance examen   NS0-111 examen   NS0-111   NS0-111

NO.16 Which two of the following statements about qtrees and volumes are true? (Choose 2)
A. A volume can contain qtrees, but qtrees cannot contain qtrees.
B. A quota can be set for a qtree, but not for an exported file system.
C. A qtree can contain a volume, but a volume cannot contain a qtree.
D. The default security style for a qtree is the security style of the volume root directory.
Answer: AD

Network Appliance   NS0-111 examen   NS0-111 examen   certification NS0-111

NO.17 Which one of the following files will allow you to change the search order for hostname resolution?
A. /etc/hosts
B. /etc/resolv.conf
C. /etc/searchorder.conf
D. /etc/nsswitch.conf
Answer: D

Network Appliance examen   certification NS0-111   NS0-111   certification NS0-111

NO.18 What is NDMP?
A. It is a standard protocol for controlling data transfers between primary and secondary storage devices
B. It is a proprietary protocol used for controlling data transfers between the storage appliance head and
disk drives
C. It is a networking trace analysis tool
D. It is a network management tool for storage appliances
Answer: A

Network Appliance examen   NS0-111   NS0-111   NS0-111 examen   certification NS0-111

NO.19 Which one of the following console commands indicates that all expansion cards are installed in the
appropriate slots on the system board?
A. config -v
B. vol status -r
C. sysconfig -c
D. sysconfig -t
E. sysconfig -m
Answer: C

certification Network Appliance   NS0-111   NS0-111 examen   NS0-111 examen

NO.20 Which one of the following statements best describes the primary value of NVRAM?
A. Data integrity and improved response time for write operations
B. RAID protection
C. Data integrity and simplified backups
D. Separate processing of the network protocol stack
E. Separate processes for the disk subsystem
Answer: A

certification Network Appliance   certification NS0-111   certification NS0-111   NS0-111

Pass4Test peut offrir nombreux de documentations aux candidats de test Network Appliance NS0-111, et aider les candidats à réussir le test. Les marétiaux visés au test Network Appliance NS0-111 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Network Appliance NS0-111 100%.

Network Appliance NS0-145, de formation et d'essai

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Network Appliance NS0-145 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification Network Appliance NS0-145 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.

Code d'Examen: NS0-145
Nom d'Examen: Network Appliance (NetApp Certified Storage Associate)
Questions et réponses: 120 Q&As

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Network Appliance NS0-145 à se preuver. Mais le taux du succès et bien bas. Participer le test Network Appliance NS0-145 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Selon les anciens test Network Appliance NS0-145, la Q&A offerte par Pass4Test est bien liée avec le test réel.

NS0-145 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-145.html

NO.1 If you change the setting for the option cifs.neg_buf_size, you need to terminate CIFS on the
storage system and do a restart for the changes to take effect.
A. True
B. False
Answer: A

Network Appliance   certification NS0-145   NS0-145   NS0-145 examen

NO.2 Which command would you use to verify that the iSCSI service is running?
A. license add iSCSI
B. iscsi service
C. iscsi status
D. iscsi protocol
Answer: C

Network Appliance   certification NS0-145   certification NS0-145   NS0-145   certification NS0-145

NO.3 CIFS clients can resolve symbolic links created by NFS clients on the storage system.
A. True
B. False
Answer: A

Network Appliance   certification NS0-145   NS0-145   NS0-145

NO.4 The super user receives an "Access Denied" message when he attempts to mount the new
qtree. What is the most likely cause of this error?
A. NFS is turned off on the storage system.
B. The qtree has not been exported.
C. The qtree is set to ntfs only security style.
D. The qtree is missing from the /etc/hosts file.
Answer: B

Network Appliance examen   NS0-145   certification NS0-145

NO.5 An iSCSI or FC SAN implementation provides _____ access to LUNs.
A. file
B. block
C. VLD
D. VIIP
Answer: B

Network Appliance   certification NS0-145   NS0-145 examen   NS0-145   NS0-145   NS0-145 examen

NO.6 Which entry in this /etc/quotas file for a qtree on /vol/wmv will affect the target?
A. The last entry for the qtree.
B. The first entry for the qtree.
C. The entry related to the group.
D. The entry related to the user.
Answer: B

Network Appliance examen   NS0-145   NS0-145 examen   NS0-145   NS0-145

NO.7 Which set of commands should be used for troubleshooting Ethernet connectivity problems
from the storage system console?
A. ifstat, netdiag
B. sysconfig - cr, sysstat
C. scsi test, shelfchk
D. dish shm_stats, sysstat
Answer: A

Network Appliance   certification NS0-145   NS0-145 examen   NS0-145

NO.8 To view per client NFS statistics on a storage system, the option nfs.per_client_stats.enable
must be set on.
A. True
B. False
Answer: A

Network Appliance examen   NS0-145   NS0-145 examen   NS0-145

NO.9 To configure a storage system as a member of a Windows active directory domain, the time
on the storage system must be set to be within plus or minus five minutes of the time on the
domain controller.
A. True
B. False
Answer: A

Network Appliance   certification NS0-145   NS0-145   NS0-145 examen   certification NS0-145   NS0-145

NO.10 When viewing the output of the sysstat -f 1 command, which three fields are part of the total
number of operations per second? (Choose three.)
A. CIFS
B. FTP
C. NFS
D. FCP
E. SnapMirror
Answer: A,C,D

Network Appliance   certification NS0-145   NS0-145   certification NS0-145   NS0-145

NO.11 Which two statements about hard and soft zoning are correct? (Choose two.)
A. Soft zones separate devices at the name service level.
B. Hard zoning physically restricts access to only members of that zone.
C. Soft zones physically restrict access to only members of that zone.
D. Hard zones allow physical movement of cables to different ports on the switch.
Answer: A,B

Network Appliance examen   NS0-145   NS0-145

NO.12 What are 3 true statements about physical reallocation of data added in ONTAP 7.3? (Choose
three.)
A. Volume Snapshots do not need to be deleted for the reallocate to run effectively
B. Reinitialize any SnapMirror relationship for the new physical geometry
C. Dont run it on files, volumes, and LUNs that are in an aggregate created by a version of ONTAP
earlier than7.2
D. Use aggr reallocate -p pathname to run the physical reallocate
E. Use reallocate -p pathname to run the physical reallocate
Answer: A,C,E

Network Appliance examen   NS0-145   NS0-145 examen   NS0-145 examen   NS0-145

NO.13 Which three are valid commands to be used with LUNs?
A. lun move
B. lun copy
C. lun clone
D. lun offline
E. lun rename
Answer: A,C,D

Network Appliance   NS0-145   NS0-145   NS0-145

NO.14 Which command is used to set the configuration of an Ethernet network interface?
A. ifstat
B. sysconfig - v
C. ifconfig
D. netstat - i
Answer: C

Network Appliance   NS0-145   NS0-145 examen   NS0-145   NS0-145   certification NS0-145

NO.15 Executing this command will have what effect?
options wafl.default_security_style mixed
A. It will change the security style of all volumes to mixed.
B. It will change the security style of all qtrees to mixed.
C. It will set the security style of all files to mixed.
D. It will set the default security style for all newly created volumes.
Answer: D

certification Network Appliance   certification NS0-145   NS0-145

Obtenez la Q&A de test Network Appliance NS0-145 de Pass4Test plus tôt, vous pouvez réussir le test Certification Network Appliance NS0-145 plus tôt.

MB6-826 dernières questions d'examen certification Microsoft et réponses publiés

La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Microsoft MB6-826.

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Microsoft MB6-826 à la première fois.

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Microsoft MB6-826 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Microsoft MB6-826 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Microsoft MB6-826.

Le Certificat de Microsoft MB6-826 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Microsoft MB6-826, c'est-à-dire avoir une grande fortune. Le Certificat Microsoft MB6-826 peut bien tester des connaissances professionnelles IT. La Q&A Microsoft MB6-826 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification Microsoft MB6-826. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test Microsoft MB6-826. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.

Le test Microsoft MB6-826 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Microsoft MB6-826 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Microsoft MB6-826 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Microsoft MB6-826 avec l'aide de Pass4Test.

Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Microsoft MB6-826 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Microsoft MB6-826.

Code d'Examen: MB6-826
Nom d'Examen: Microsoft (AX 2009 Product Builder)
Questions et réponses: 50 Q&As

MB6-826 Démo gratuit à télécharger: http://www.pass4test.fr/MB6-826.html

NO.1 For which of the following purposes can you use the Description field in the Variable groups form?
A.To have its content displayed as a tab name in the Product Builder configuration form.
B.To have its content displayed as a help text in the Product Builder configuration form.
C.To hold product model designer's comments about the modeling variable.
D.To hold notes to the Production Department about how the item is to be produced. WCalibriTahomaZ
Answer: A

Microsoft   certification MB6-826   MB6-826   MB6-826 examen

NO.2 You are a Product Designer in the Contoso Company responsible for creating a model for a
configurable projector. You want projector options to display on two separate tabs in the Product Builder
configuration form. General projector options must be displayed on the General tab, and options for the
projector lamp - on the Lamp tab. How can you achieve this?
A.Create two variable groups, name them accordingly and then add them to the model.
B.Use the template variable groups and name them General and Lamp when adding them to the model.
C.Open the Product Builder configuration form in the AOT, create and name tabs there.
D.Click Test model and edit the form that opens. WCalibriTahomaZ
Answer: A

certification Microsoft   MB6-826   certification MB6-826   MB6-826 examen

NO.3 For which of the following options can you set up default values in a product model?
A.all modeling variables
B.all modeling variables and all calculation variables
C.all variable groups
D.only item groups WCalibriTahomaZ
Answer: A

Microsoft examen   certification MB6-826   MB6-826   MB6-826

NO.4 You are a Product Designer in the Contoso Company. You create a product model for a home theater.
The theater has the following options:
Television: CRT, LCD, Plasma
Number of speakers: 2, 3, 5
Speaker height: 30.5, 45.5, 50.5
Which type of variables do you use to make each option available in the Product Builder configuration
form?
A.Enumerated text variable for the first option, Integer for the second, and Real for the third
B.Enumerated text variable for the first option, Real for the second, and Integer for the third
C.Enumerated text variables for the first and third options, and Real for the second
D.Enumerated text variable for the first, second, and third options WCalibriTahomaZ
Answer: D

Microsoft   MB6-826 examen   certification MB6-826

NO.5 You are a Product Designer responsible for creating product models. Your task is to create a model for
a home theater. The home theater dimension calculation you plan to implement in the modeling tree is
rather complex and depends on a number of factors. If this calculation fails, you want the user to view an
error message and to abort the configuration. What must you implement to abort the configuration if the
calculation fails?
A.Create an Action rule.
B.Create a Constraint rule.
C.Create a Message node of the error type. It automatically aborts the configuration.
D.It is not necessary to implement anything. In case some calculation fails the configuration is always
aborted and a standard error message is displayed. WCalibriTahomaZ
Answer: C

certification Microsoft   MB6-826 examen   MB6-826 examen   MB6-826 examen   MB6-826 examen   certification MB6-826

NO.6 You are a Product Designer responsible for creating a table constraint. Now it is time to add it to the
product model. How can you accomplish this?
A.Add the table constraint to the model as one of the validation rules.
B.Attach the table constraint to the model from the Table constraints form.
C.Add the table constraint to the Table constraints tab and then add related modeling variables to the
Modeling variables tab.
D.Add the table constraint to the Table constraints tab. Related Table variables are added to the model
automatically. WCalibriTahomaZ
Answer: D

Microsoft examen   MB6-826   certification MB6-826   certification MB6-826   MB6-826   MB6-826 examen

NO.7 You are a Product Designer in the Contoso Company responsible for creating product models. Among
the customers of the company, the most popular configuration of a home theater item is the one with LCD
television and five speakers. You are asked by the Order Processor to make the "LCD" and "five" values
default for the Television and Speakers variables. You added these variables to the Default values form
and now must fill the Valid for (Customer relation) and Valid for (Item relation) fields for each variable.
What must you select in these two fields for each variable?
A.Table and All
B.All and Table
C.All and All
D.Table and Table WCalibriTahomaZ
Answer: B

Microsoft   MB6-826 examen   MB6-826

NO.8 What are the mandatory steps to take to make the user profiles functional?
Choose the 2 that apply.
A.Attach user profiles to employees.
B.Assign user profiles to variables.
C.Attach user profiles to Microsoft Dynamics AX users.
D.Activate user profiles in the Product Builder parameters form. WCalibriTahomaZ
Answer: AB

Microsoft examen   MB6-826   MB6-826   certification MB6-826

NO.9 For what purpose do you create global rules?
A.To use them as templates when creating rules for the model.
B.To make them available for all the users, regardless of user profiles.
C.To be able to attach them to several product models.
D.To be able to automatically apply them to all the models created. WCalibriTahomaZ
Answer: C

Microsoft   MB6-826   MB6-826   MB6-826   MB6-826   certification MB6-826

NO.10 You are a Product Designer in the Contoso Company. The company opens a new subsidiary in Russia.
The Product Builder configuration forms must be translated to Russian to be used by local employees.
How can you make the Product Builder configuration forms available in Russian?
Choose the 2 that apply.
A.Add Russian to the Available languages in the Product Builder parameters form.
B.Type the translation in the form that opens after clicking Language texts in the Modeling variables form.
C.Type the translation in the Translation table located under Product Builder > Setup.
D.Type the translation in the form that opens after clicking Language texts in the Variable group form.
WCalibriTahomaZ
Answer: BD

Microsoft   MB6-826   MB6-826   MB6-826

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Microsoft MB6-826. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Le meilleur matériel de formation examen Microsoft 70-291

Pass4Test peut offrir la facilité aux candidats qui préparent le test Microsoft 70-291. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Microsoft 70-291 selon le résumé de test réel Microsoft 70-291. Vous pouvez réussir le test à la première fois sans aucune doute.

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Microsoft 70-291 très tôt. Pass4Test peut vous permettre à réussir 100% le test Microsoft 70-291, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

Il y a nombreux façons à vous aider à réussir le test Microsoft 70-291. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test Microsoft 70-291 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test Microsoft 70-291 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.

Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Microsoft 70-291. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.

Pass4Test peut vous fournir un raccourci à passer le test Microsoft 70-291: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test Microsoft 70-291. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.

Code d'Examen: 70-291
Nom d'Examen: Microsoft (Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure)
Questions et réponses: 260 Q&As

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Microsoft 70-291. Le guide d'étude de Pass4Test comprend les excercices de Microsoft 70-291 et la Q&A qui peut vous permetrre à réussir 100% le test Microsoft 70-291. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Microsoft 70-291 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Microsoft 70-291 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Microsoft 70-291 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

70-291 Démo gratuit à télécharger: http://www.pass4test.fr/70-291.html

NO.1 131.107.12.0/24
Answer
:
2.You are the network administrator for your company.All servers run Windows Server 2003. All servers
are configured with static IP addresses.All client computers run Windows XP Professional.All client
computers are configured as DHCP clients.
The company has a main office and one branch office.The offices are separated by a router.A DHCP
server is deployed in each office.
One of the DHCP servers shuts down unexpectedly.It takes four hours to repair the server.During that
time, several mobile users connect their portable computers to the network and report that they cannot
connect to shared resources on the network.
After the server is repaired, you create a new scope on each DHCP server that includes IP addresses for
the other office.You activate the scopes.
You test the new DHCP configuration by shutting down the DHCP server in the main office.You find out
that the client computers in the main office are not receiving IP addresses from the DHCP server in the
branch office. You need to ensure that when the DHCP server in one office fails, the client computers will
receive a correct IP
address configuration from the DHCP server in the other office.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Configure the router between the offices to forward BOOTP broadcasts.
B.Configure the DHCP server in each office with a DHCP scope that includes the same IP addresses as
the DHCP server in the other office.Activate the scope.
C.Configure the DHCP server in each office with an additional network adapter.Connect each new
network adapter to the local network.Assign an IP address from the other office's network to each new
network adapter.
D.Install and configure a DHCP relay agent in each office.
Answer: DA

certification Microsoft   70-291   70-291
3.You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The network contains a Web server named Server1 that runs IIS 6.0 and hosts a secure Web site.The
Web site is accessible from the intranet, as well as from the Internet.All users must authenticate when
they connect to Server1.
All users on the Internet must use a secure protocol to connect to the Web site.Users on the intranet do
not need to use a secure protocol.
You need verify that all users are using a secure protocol to connect to Server1 from the Internet.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Monitor the events in the application log on Server1.
B.Monitor the events in the security log on Server1.
C.Monitor the Web server connections on Server1 by using a performance log.
D.Monitor network traffic to Server1 by using Network Monitor.
E.Monitor the IIS logs on Server1.
Answer: ED

Microsoft examen   70-291   70-291 examen   70-291
4.You are the administrator of an Active Directory domain.All servers run Windows Server 2003. All client
computers run Windows XP Professional.All computers are members of the domain.
The Secure Server (Require Security) IPSec policy is assigned to a file server named Server6. The policy
is configured as shown in the exhibit.(Click the Exhibit button.)
Users report that they cannot access shared folders on Server6. Users were able to access shared
folders on
Server6 prior to the implementation of the IPSec policy.
You need to ensure that all client computers in the domain can access the shared folders on Server6. You
must ensure that all communications between client computers and Server6 be encrypted.
What should you do?
A.On Server6, enable the All ICMP Traffic IP Security rule in the properties of the Secure Server (Require
Security) IPSec policy.
B.On Server6, enable the <Dynamic> IP Security rule in the properties of the Secure Server (Require
Security)
IPSec policy.
C.On all client computers, assign the Client (Respond Only) IPSec policy.
D.On all client computers, install an IPSec communication certificate in the local machine store.
Answer: C

certification Microsoft   70-291   certification 70-291
5.You are a network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The company has a main office and one branch office.The perimeter networks for each office are
configured as shown in the exhibit.(Click the Exhibit button.)
You configure an L2TP/IPSec VPN tunnel between Server1 and Server2. You also configure and assign
an IPSec
policy named RASIPSec that requires secure communications.
You need to ensure that no unsecured traffic from the Internet reaches the internal network through this
VPN.You
also need to ensure that access to the VPN servers from their respective internal networks is not
disrupted. What should you do?
A.Configure input and output L2TP/IPSec packet filters on the internal interfaces of Server1 and Server2.
B.Configure input and output L2TP/IPSec packet filters on the external interfaces of Server1 and Server2.
C.In the properties of RASIPSec, edit the All IP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
D.In the properties of RASIPSec, edit the All ICMP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
Answer: B

Microsoft   70-291 examen   70-291 examen   70-291
6.You are the administrator of an Active Directory domain.The network contains a Windows Server 2003
domain controller named Server1.
Users report that they experience intermittent delays when they log on to Server1. Administrators report
that replication attempts between Server1 and other domain controllers are occasionally delayed.
You need to verify the cause of the intermittent connection delays to Server1. You also need to find out
whether the problem is related to a hardware deficiency on Server1. You need to track these delays over
a period of one day.
What should you do first?
A.Run the netdiag /verbose command to perform a network diagnostic test on Server1.
B.Run the replmon command to view the Active Directory replication status on Server1.
C.Use Network Monitor to view the network traffic packet contents between Server1 and all other
computers.
D.Create a System Monitor counter to track the queue lengths on the network adapter on Server1.
Answer: D

certification Microsoft   70-291   certification 70-291   70-291 examen   70-291

NO.2 131.107.11.0/24

NO.3 Drag and Drop
You are a network administrator for the Graphic Design Institute.The network contains five Windows
Server 2003 computers that also function as DNS servers.The servers are configured as shown in the
work area.
The Lagos and Nairobi branches of the school each have five Windows XP Professional client
computers.The
Tangier branch has 5,000 Windows XP Professional client computers, and the Cape Town branch has
2,500
Windows XP Professional client computers.
Server1 is located in the school's main office in Cairo.Server1 is the authoritative server for a zone named
TestInside.com.No changes are planned for the name server (NS) resource records for TestInside.com.
The DNS servers in the Nairobi and Lagos branches are multiuse servers that are configured with the
minimum hardware necessary to run Windows Server 2003. The DNS servers in the Cape Town and
Tangier branches are configured as dedicated servers with hardware that is sufficient to sustain multiple
DNS zones.
You need to ensure that the following requirements are met:
Each client computer can resolve names on the network as quickly as possible by using a fully qualified
domain name (FQDN).
Prevent zone replication traffic from occurring on the slow network connections.
Minimize hard disk utilization on the DNS servers in the Lagos and Nairobi branches as much as possible.
Ensure that DNS queries in Tangier and Cape Town are resolved locally.
How should you configure the remote DNS servers?
To answer, drag the appropriate server configuration to the correct server or servers in the work area.
Answer:

NO.4 You are the network administrator for your company.The network consists of a single Active Directory
domain.
The domain contains an organizational unit (OU) named Webservers.The Webservers OU contains the
computer accounts of 12 Windows Server 2003 computers that function as intranet Web servers.A Group
Policy object (GPO) named WebserversPolicy is linked to the Webservers OU.The GPO is used to
configure various settings on
the computers in the OU.A global group named WebserverAdmins is a member of the Administrators local
group on each intranet Web server.
You plan to install a security scanning application on each intranet Web server.The documentation for the
application states that it uses a service account, which must be able to modify the
HKEY_LOCAL_MACHINE\SYSTEM key in the registry of every computer on which the application is
installed.
You create the service account in the domain.The company's written security policy states that service
accounts must be assigned only the minimum rights and permissions that they require to function.
You need to configure the intranet Web servers so that they comply with the installation requirements of
the security scanning application.You also need to comply with the company's security policy.You want to
achieve this goal by using the minimum amount of administrative effort.
What should you do?
A.Add the service account to the WebserverAdmins global group.
B.Configure the required permissions as registry security settings in the WebserversPolicy GPO.
C.Run the regedit.exe command to add the required permissions to the registry of each intranet Web
server.
D.Run the explorer.exe command to modify NTFS permissions on the
Systemroot\System32\Config\System
file.Assign the service account the Allow - Change permission.
E.Configure file system security settings in the WebserversPolicy GPO to modify NTFS permissions on
the
Systemroot\System32\Config\System file.Assign the service account the Allow - Change permission.
Answer: D

certification Microsoft   70-291   70-291   70-291

NO.5 Active Screen
You are the network administrator for your company.The network consists of a single Active Directory
domain.The relevant portion of the network is shown in the exhibit.(Click the Exhibit button.)
You need to configure a server named Server1 to use a valid static IP configuration.You need to enable
Server1 to
communicate with all hosts on the network and on the Internet.You want Server1 to query the DNS server
on the local subnet for name resolution.You also want to configure redundancy for name resolution.
What should you do?
To answer, configure the correct options in the dialog box.Drag the appropriate IP address or addresses
and the appropriate subnet mask or masks to the appropriate location or locations in the dialog box.
Answer:

NO.6 Drag drop
You are the network administrator for a Web hosting company.All servers run Windows Server 2003. All
client computers run Windows XP Professional.
Your company is assigned the following IP address ranges by the ISP:
>131.107.10.0 through 131.107.10.255
>131.107.11.0 through 131.107.11.255
The company's data center contains 400 Windows Server 2003 computers and consists of two subnets
named subnet A and subnet B.Subnet A contains 200 servers and uses the 131.107.10.0 network
address.Subnet B also contains 200 servers and uses the 131.107.11.0 network address.All server IP
addresses are assigned by DHCP.All computers in the data center have valid Internet-accessible IP
addresses.
As a result of a corporate acquisition, 200 additional servers will be added to your company's data center
within one month.The new servers will be placed on the network segment that maps to subnet A.The
existing router does not have the capacity for an additional subnet, and the budget does not allow the
purchase of a new router.You will
need to add the additional servers to the existing subnet A.The ISP assigns you the additional IP address
range 131.107.12.0 through 131.107.12.255.
You need to change the IP addressing scheme to accommodate all required servers in subnet A and
subnet B.You are authorized to make any necessary changes.
The diagram in the work area shows the network configuration and the planned number of servers for
each subnet.
Which IP address should be assigned to each subnet?
To answer, drag the appropriate IP address or addresses to the correct locations in the work area.
IP address IP Addresses
1> 131.107.10.0/23

NO.7 131.107.11.0/23

NO.8 You are the network administrator for your company.The network consists of a single subnet.A
Windows
Server 2003 computer named Server1 functions as a DHCP server.
Server1 leases IP addresses in the 10.1.1.0/24 range to desktop client computers.There are 12 client
reservations for other servers and network printers.You have configured several detailed scope and
server options. If Server1 fails, you want to have a contingency plan that will allow you to use a domain
controller named DC2 as a DHCP server as quickly as possible.You install DHCP on DC2 without any
configuration and stop the DHCP
Server service.
You want to list the tasks that are required to back up Server1 and the tasks that are required to restore
the backup to DC2. A backup age of 24 hours or less is acceptable.
If Server1 fails, which set of tasks is required to enable DC2 to replace Server1 as the DHCP server?
A.On Server1: Schedule the Backup utility to back up the System State data to tape every 24 hours.
On DC2: Perform a non-authoritative System State restore.Using the Services console, start the DHCP
Server
service.Authorize DHCP.Reconcile the database.
B.On Server1: Use the Backup utility to schedule a tape backup of the DHCP database every 24 hours.
On DC2: Restore the tape backup of the DHCP database to a folder.Using the DHCP console, restore the
backup from the same folder.From the command prompt, type net start dhcpserver.Authorize DHCP.
C.On Server1: Schedule the Backup utility to back up the System State data to tape every 24 hours.
On DC2: Perform an authoritative System State restore.Manually re-create the server and scope options
that were on Server1. From a command prompt, type net start dhcpserver.Authorize DHCP.
D.On Server1: Use the DHCP console to perform a DHCP backup every 24 hours.Copy the backup on a
network share that is accessible by DC2.
On DC2: Copy the backup to a local folder.Using the DHCP console, restore the backup from the local
folder.From a command line, type net start dhcp.Authorize DHCP.Re-create the 12 client reservations.
Answer: B

certification Microsoft   70-291   70-291 examen   70-291   70-291 examen

NO.9 You are the administrator of a Windows Server 2003 computer named Server1. Server1 is a domain
member server that has the DNS service installed.
Server1 is configured with two network interfaces named NIC1 and NIC2. Routing is not enabled between
the two network interfaces.NIC1 and NIC2 are configured as shown in the following table.
Resources on the preproduction network segment use the same fully qualified domain names (FQDNs)
as resources in the production network.The TCP/IP properties on client computers in the preproduction
environment are controlled by individual testers.
You need to ensure that the users in the preproduction environment cannot resolve FQDNs from the
production network.You want to accomplish this goal by using the DNS console on Server1.
What should you do?
A.Configure the interfaces properties on Server1 to listen on 192.168.2.10 only.
B.Configure the forwarders on Server1 to refer requests to 192.168.3.2.
C.Configure Server1 to disable recursion.
D.Configure Server1 to disable round robin.
Answer: A

Microsoft   70-291   certification 70-291   70-291   70-291 examen   certification 70-291

NO.10 You are the network administrator for your company.The network consists of a single Active Directory
domain.The domain contains 35 Windows Server 2003 computers; 3,000 Windows XP Professional
computers; and 2,000 Windows 2000 Professional computers.
Windows Server Update Services (WSUS) is installed on a server named Server1. The necessary Group
Policy object (GPO) is configured.
You need to confirm whether all computers in the domain have received all approved updates from
Server1.
What should you do on Server1?
A.Install and configure Urlscan.exe.
B.At the command prompt, type gpresult /scope COMPUTER.
C.Open the WSUS console.Run the Status of Computers report.
D.Open the WSUS console.Run the Synchronization Results report.
Answer: C

Microsoft examen   70-291   70-291   70-291 examen

NO.11 Drag and Drop
You are the network administrator for Contoso, Ltd.The network consists of a single Active Directory
forest.The
forest contains two domains named contoso.com and corp.contoso.com.The functional level of the forest
and the two domains is Windows Server 2003.
The corp.contoso.com zone is configured as an Active Directory-integrated zone.The corp.contoso.com
zone is also configured to replicate to all domain controllers in the domain.
The servers are configured as shown in the following table.
You plan to remove Server1 from the network.You need to install DNS to host the corp.contoso.com
zone.Your solution must be fault-tolerant.
On which server or servers should you install DNS?
To answer, drag the DNS service to the correct server or servers in the work area.
Answer:

NO.12 You are the administrator of a Windows Server 2003 computer named Server1. Server1 has a
third-party application installed on it.The third-party application runs as a service that is named Service1.
Service1 fails periodically.
You need to configure the recovery options for Service1 to meet the following requirements:
If Service1 runs successfully for a day or more, you need to ensure that only the service is immediately
restarted upon failure.
If, after this failure, Service1 does not run successfully for another day, you must ensure the entire server
is immediately restarted.
Which three actions should you perform? (Each correct answer presents part of the solution.Choose
three.)
A.Configure the Reset fail count after value for Service1 to 1 day.
B.Configure the Restart service after value for Service1 to 1,440 minutes.
C.Configure the response to the first failure to be to restart Service1.
D.Configure the response to the first failure to be to restart Server1.
E.Configure the response to the second failure to be to restart Service1.
F.Configure the response to the second failure to be to restart Server1.
Answer: FCA

Microsoft   70-291   70-291 examen   70-291

NO.13 You are a network administrator for Alpine Ski House.The network consists of a single Active Directory
domain named alpineskihouse.com.
Your company acquires a company named Adventure Works.The Adventure Works network consists of a
single
Active Directory domain named adventure-works.com.
A server named Server32 is a network-management application server in the adventure-works.com
domain.Server32 accesses all of the desktop client computers to perform automated software upgrades
and hardware inventory.The network-management software on Server32 references desktop computers
by unqualified
host names, which are resolved to clientname.adventure-works.com by using a DNS server.
You join Server32 to your domain to become server32.alpineskihouse.com.The Server32 IP address is
10.10.10.90.
You are gradually migrating all adventure-works.com desktop client computers to your domain to become
clientname.alpineskihouse.com.You do not have access to the adventure-works.com DNS server.When
Server32 attempts to apply an update to the client computers, the network-management software returns
many alerts that say that desktop computers cannot be found.
You want to allow the network-management software on Server32 to resolve unqualified client computer
host
ames in adventure-works.com or alpineskihouse.com, and you want to use the minimum amount of
administrative effort.
What should you do?
A.On the DNS server for alpineskihouse.com, add a zone for adventure-works.com.Create a host (A)
record for server32.adventure-works.com that points to 10.10.10.90.
B.On Server32, in System Properties, type adventure-works.com in the Primary DNS suffix of this
computer field in the DNS Suffix and Netbios Computer Name setting.
C.On Server32, configure a Hosts file that contains the name and IP address of every network computer.
D.On Server32, in Advanced TCP/IP Settings, add adventure-works.com and alpineskihouse.com to the
Append these DNS suffixes (in order) setting.
Answer: D

Microsoft examen   70-291 examen   70-291 examen   certification 70-291   70-291 examen   70-291

NO.14 You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003. All client computers run Windows XP Professional.
You install Windows Server Update Services (WSUS) on a network server named Server1. When you
attempt to synchronize Server1 with the Windows Update servers, you receive an error message.You
open Internet Explorer and verify that you can communicate with an external Web site by using the proxy
server.
You need to ensure that Server1 can communicate with the Windows Update servers.
What should you do on Server1?
A.Restart the IIS administration tool.
B.Configure the Internet Explorer settings to bypass the proxy server.
C.In the WSUS options, configure authentication to the proxy server.
D.Install the ISA Firewall Client.
Answer: C

Microsoft   70-291   70-291   70-291

NO.15 You are the network administrator for your company.The network consists of a single Active Directory
domain.The functional level of the domain is Windows Server 2003. All client computers in the domain run
Windows XP Professional.
An application named Inventory.exe is installed on all computers in the domain to remotely gather
software inventory information.The application runs as a service in the security context of the Local
System.The startup type of the service is set to Automatic.
In the Default Domain Policy Group Policy object (GPO), the security administrator has configured a
software restriction policy that is applied to all computers in the domain.The policy contains a hash rule for
the
Inventory.exe application, and the hash rule is configured with a security level of Unrestricted.
The client computers on the network are attacked by a worm that is distributed by e-mail messages
received over the Internet.The worm detects the presence of Inventory.exe on a computer, then starts a
new instance of the application in the security context of the logged-on user.The worm exploits a bug in
the application to cause the
computer to fail.
You need to ensure that Inventory.exe cannot be started by the worm, while still allowing the application to
run as a service.
What should you do?
A.In the computer settings section of the Default Domain Policy GPO, configure a software restriction
policy that contains a zone rule for the Internet zone.Configure the zone rule with a security level of
Disallowed.
B.In the user settings section of the Default Domain Policy GPO, configure a software restriction policy
that contains a zone rule for the Internet zone.Configure the zone rule with a security level of Disallowed.
C.In the user settings section of the Default Domain Policy GPO, configure a software restriction policy
that
contains a hash rule for the Inventory.exe application.Configure the hash rule with a security level of
Disallowed.
D.In the computer settings section of the Default Domain Policy GPO, modify the existing software
restriction policy hash rule for the Inventory.exe application so that the hash rule has a security level of
Disallowed.
Answer: D

certification Microsoft   70-291 examen   70-291   70-291

NO.16 131.107.12.0/23

NO.17 131.107.10.0/24

NO.18 You are the network administrator for your company.The network contains a Windows Server 2003
computer named Server1.
Three administrators are members of the Administrators local group on Server1. Twelve other
administrators are members of the Domain Admins group.The Domain Admins group is also a member of
the Administrators local group on Server1.
Someone makes an unauthorized change to the HKEY_LOCAL_MACHINE\SYSTEM key in the registry
on
Server1, which causes the computer to fail.You fix the problem.
You need to log all attempts to access the HKEY_LOCAL_MACHINE\SYSTEM key in the registry on
Server1.
You decide to enable auditing in the local security policy on Server1.
Which two actions should you perform? (Each correct answer presents part of the solution.Choose two.)
A.Enable auditing in the local security policy on Server1. Select the Audit object access (success and
failure) option in the audit policy.
B.Enable auditing in the local security policy on Server1. Select the Audit privilege use (success and
failure) option in the audit policy.
C.Enable auditing in the local security policy on Server1. Select the Audit system events (success and
failure) option in the audit policy.
D.Configure the SACL on the HKEY_LOCAL_MACHINE\SYSTEM key in the registry.Specify auditing of
the Full Control permission for Everyone.
E.Configure the SACL on the HKEY_LOCAL_MACHINE\SYSTEM key in the registry.Specify auditing of
the Set Value permission for Everyone.
Answer: D A

certification Microsoft   certification 70-291   certification 70-291   70-291

NO.19 You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003. All client computers run Windows XP Professional.
You need to implement a new software update infrastructure.You discover that security patches, critical
updates, and service packs have never been installed on any client computer on the network.
You install Windows Server Update Services (WSUS) on a Windows Server 2003 computer named
Server5. You synchronize and approve all of the current security patches, critical updates, and service
packs.
You need to ensure that all client computers receive all Microsoft security patches, critical updates, and
service packs.
Which two actions should you perform? (Each correct answer presents part of the solution.Choose two.)
A.Open the WSUS console.Select the option to automatically approve WSUS updates.
B.Install the Automatic Updates client on all client computers.
C.Modify the Microsoft Update settings of the Default Domain Controller organizational unit (OU) Group
Policy object (GPO) to point client computers to http ://server5.
D.Modify the Microsoft Update settings of the Default Domain Policy Group Policy object (GPO) to point
client computers to http: //server5.
E.Open the WSUS console.Create a target group and assign all client computers to the group.
Answer: B D

Microsoft examen   70-291   70-291   70-291   70-291

NO.20 You are a network administrator for A.Datum Corporation.The network consists of a single Active
Directory domain named adatum.net.
Users regularly browse the internal network and the Internet from their client computers.All Web and
e-mail hosting for a separate DNS domain named adatum.com is outsourced to an ISP.All name
resolution requests for adatum.com are resolved by the ISP.You have no administrative control over the
DNS servers at the ISP.You
cannot list the contents of adatum.com by using the nslookup command on the DNS servers at the ISP.
A Windows Server 2003 computer named Server1 is configured with a primary zone for adatum.net.All
root hints have been removed from Server1. All client computers refer to this DNS server for name
resolution.
You need to configure DNS resolution to ensure that all client computers can locate and access resources
in adatum.net, adatum.com, and the Internet.
What should you do?
A.Configure a secondary zone for adatum.com on Server1.
B.Configure a primary zone for adatum.com on Server1.
C.Configure conditional forwarding for adatum.com with the IP address of the DNS server at the ISP.
D.Configure simple forwarding with the default settings with the IP address of the DNS server at the ISP.
Answer: D

Microsoft   70-291 examen   70-291

Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification Microsoft 70-291, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test Microsoft 70-291 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.

Microsoft 70-293, de formation et d'essai

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Microsoft après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.

Le produit de Pass4Test peut assurer les candidats à réussir le test Microsoft 70-293 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Code d'Examen: 70-293
Nom d'Examen: Microsoft (Planning and Maintaining a Microsoft Windows Server 2003 Network Infrastructure)
Questions et réponses: 290 Q&As

Pass4Test a de formations plus nouvelles pour le test Microsoft 70-293. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Microsoft 70-293 à tous les candidats qui nous choisissent. L'importance de Certification Microsoft 70-293 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.

Pass4Test est un site d'offrir la bonne Q&A Microsoft 70-293. Le produit offert par Pass4Test peut vous aider à réussir ce test très difficile. Si vous ajoutez le produit au panier, vous allez économiser le temps et l'effort. Le produiti Pass4Test est bien réputé dans l'Idustrie IT.

Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Microsoft 70-293 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Microsoft 70-293 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Microsoft 70-293.

Le test Microsoft 70-293 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test Microsoft 70-293. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test Microsoft 70-293. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Microsoft 70-293.

70-293 Démo gratuit à télécharger: http://www.pass4test.fr/70-293.html

NO.1 You are the network administrator for your company. The network consists of a single Active Directory
domain. The functional level of the domain is Windows Server 2003. The domain contains an
organizational unit (OU) named Servers that contains all of the company's Windows Server 2003
resource servers. The domain also contains an OU named Workstations that contains all of the
company's Windows XP Professional client computers. You configure a baseline security template for
resource servers named Server.inf and a baseline security template for client computers named
Workstation.inf. The Server.inf template contains hundreds of settings, including file and registry
permission settings that have inheritance propagation enabled. The Workstation.inf template contains 20
security settings, none of which contain file or registry permissions settings. The resource servers operate
at near capacity during business hours. You need to apply the baseline security templates so that the
settings will be periodically enforced. You need to accomplish this task by using the minimum amount of
administrative effort and while minimizing the performance impact on the resource servers. What should
you do.?
A. Create a Group Policy object (GPO) and link it to the domain. Import both the Server.inf and the
Workstation.inf templates into the GPO.
B. Import both the Server.inf and the Workstation.inf templates into the Default Domain Policy Group
Policy object (GPO).
C. On each resource server, create a weekly scheduled task to apply the Server.inf settings during
off-peak hours by using the secedit command. Create a Group Policy object (GPO) and link it to the
Workstations OU. Import the Workstation.inf template into the GPO.
D. On each resource server, create a weekly scheduled task to apply the Server.inf settings during
off-peak hours by using the secedit command. Import the Workstation.inf template into the Default
Domain Policy Group Policy object (GPO).
Answer: C

certification Microsoft   70-293   certification 70-293   certification 70-293

NO.2 You are a network administrator for your company. The network consists of a single Active Directory
domain named treyresearch.com. All servers run Windows Server 2003. All client computers run
Windows XP Professional.
The company has two DNS servers named Server1 and Server2. Server1 hosts the primary DNS zone for
treyresearch.com. Server2 provides name resolution for the external Internet name of the company on the
Internet and is configured with root hints.
Client computers are configured to use Server1 as their only DNS server.
Users report that they cannot access Web sites on the Internet.
You need to ensure that the client computers can access Internet-based sites. You must accomplish this
task by using Server1's DNS console with the least amount of administrative effort. Your operation must
not affect other settings on Server1.
Answer.CP1 AND CP2
DNS console -> Server -> Properties -> Forwarders, 'All other DNS domains' to IP address for Server2.

NO.3 You are the network administrator for your company. All servers run Windows Server 2003. You
configure a baseline security template named Baseline.inf. Several operations groups are responsible for
creating templates containing settings that satisfy operational requirements. You receive the templates
shown in the following table.
The operations groups agree that in the case of conflicting settings, the priority order listed in the following
table establishes the resultant setting.
You need to create one or more Group Policy objects (GPOs) to implement the security settings. You want
to minimize the amount of administrative effort required when changes are requested by the various
operations groups. What should you do?
A. Create a GPO and import the following templates in the following order. Baseline.inf, Sec.inf. Create a
GPO for each server role and import only the specific template for that role into each respective GPO.
B. Create a GPO and import the following templates in the following order. Sec.inf, Baseline.inf. Create a
GPO for each server role and import only the specific template for that role into each respective GPO.
C. Create a GPO for each server role and import the following templates in the following order.
Baseline.inf, specific server role template, Sec.inf.
D.Create a GPO and import the following templates in the following order. Sec.inf, Db.inf, File.inf,
Baseline.inf.
Answer: A

Microsoft   70-293   70-293 examen

NO.4 You are the network administrator for your company. The network consists of a single Active Directory
domain. The network contains 10 domain controllers and 50 servers in application server roles. All
servers run Windows Server 2003. The application servers are configured with custom security settings
that are specific to their roles as application servers. Application servers are required to audit account
logon events, object access events, and system events. Application servers are required to have
passwords that meet complexity requirements, to enforce password history, and to enforce password
aging. Application servers must also be protected against man-in-the-middle attacks during authentication.
You need to deploy and refresh the custom security settings on a routine basis. You also need to be able
to verify the custom security settings during audits. What should you do?
A. Create a custom security template and apply it by using Group Policy.
B. Create a custom IPSec policy and assign it by using Group Policy.
C. Create and apply a custom Administrative Template.
D. Create a custom application server image and deploy it by using RIS.
Answer: A

Microsoft examen   70-293   70-293

NO.5 You are a network administrator for your company. All servers run Windows Server 2003. All client
computers run Windows XP Professional.
All client computers receive their TCP/IP configuration information from the DHCP server named Server1.
You discover that client computers get a new IP address every time they are restarted.
You need to ensure that client computers receive the same IP address as often as possible regardless of
a system restart. You must accomplish this task by using the DHCP console. Your operation must not
affect other settings.
Answer.(CP1 OR CP2) AND CP3
We need to change the lease time to "Unlimited".
Step #1.
Open the DHCP console by clicking Start > Administrative Tools > DHCP.
Step #2.
Expand the tree.
Step #3.
Right click on Scope1 and select Properties.
Step #4.
Select Unlimited then click Apply and OK.
Step #5.
Close the DHCP console.

NO.6 You are a network administrator for your company. The company has a main office and one branch
office. The network consists of a single Active Directory domain. All servers run Windows Server 2003.
The company needs to connect the main office network and the branch office network by using Routing
and Remote Access servers at each office. The networks will be connected by a VPN connection over the
Internet.
The company's written security policy includes the following requirements for VPN connections over the
Internet:
All data must be encrypted with end-to-end encryption.
VPN connection authentication must be at the computer level.
Credential information must not be transmitted over the Internet as part of the authentication process.
You need to configure security for VPN connection between the main office and the branch office. You
need to comply with the written security policy.
What should you do?
A.Use a PPTP connection with EAP-TLS authentication.
B.Use a PPTP connection with MS-CHAP v2 authentication.
C.Use an L2TP connection with EAP-TLS authentication.
D.Use an L2TP connection with MS-CHAP v2 authentication.
Answer:C

Microsoft examen   70-293   70-293 examen   70-293   70-293   70-293

NO.7 You are the network administrator for your company. The network consists of a single Active Directory
domain. The network contains two Windows Server 2003 domain controllers, two Windows 2000 Server
domain controllers, and two Windows NT Server 4.0 domain controllers.
All file servers for the finance department are located in an organizational unit (OU) named Finance
Servers. All file servers for the payroll department are located in an OU named Payroll Servers. The
Payroll Servers OU is a child OU of the Finance Servers OU.
The company's written security policy for the finance department states that departmental servers must
have security settings that are enhanced from the default settings. The written security policy for the
payroll department states that departmental servers must have enhanced security settings from the
default settings, and auditing must be enabled for file or folder deletion.
You need to plan the security policy settings for the finance and payroll departments.
What should you do?
A.Create a Group Policy object (GPO) to apply the Compatws.inf security template to computer objects,
and link it to the Finance Servers OU.
Create a second GPO to enable the Audit object access audit policy on computer objects, and link it to the
Payroll Servers OU.
B.Create a Group Policy object (GPO) to apply the Securews.inf security template to computer objects,
and link it to the Finance Servers OU.
Create a second GPO to enable the Audit object access audit policy on computer objects, and link it to the
Payroll Servers OU.
C.Create a Group Policy object (GPO) to apply the Compatws.inf security template to computer objects,
and link it to the Finance Servers OU.
Create a second GPO to apply the Hisecws.inf security template to computer objects, and link it to the
Payroll Servers OU.
D.Create a Group Policy object (GPO) to apply the Securews.inf security template to computer objects,
and link it to the Finance Servers and to the Payroll Servers OUs.
Create a second GPO to enable the Audit object access audit policy on computer objects, and link it to the
Payroll Servers OU.
Answer:B

Microsoft   70-293   certification 70-293

NO.8 You are the network administrator for your company. The network contains an application server
running Windows Server 2003.
Users report that the application server intermittently responds slowly. When the application server is
responding slowly, requests that normally take 1 second to complete take more than 30 seconds to
complete. You suspect that the slow server response is because of high broadcast traffic on the network.
You need to plan how to monitor the application server and to have a message generated when
broadcast traffic is high. You also want to minimize the creation of false alarms when nonbroadcast traffic
is high.
What should you do?
A.Use the Alerts option in the Performance Logs and Alerts snap-in to configure an alert to trigger when
the Datagrams/sec counter in the UDPv4 object is high.
B.Use System Monitor and configure it to monitor the Segments/sec counter in the TCPv4 object.
C.Use System Monitor and configure it to monitor the Datagrams/sec counter in the UDPv4 object.
D.Use the Alerts option in the Performance Logs and Alerts snap-in to configure an alert to trigger when
the Datagrams/sec counter in the TCPv4 object is high.
Answer:A

Microsoft examen   70-293 examen   70-293   certification 70-293   70-293   70-293 examen

NO.9 You are the network administrator for your company. The network contains Windows Server 2003
computers and Windows XP Professional computers.
The company deploys two DNS servers. Both DNS servers run Windows Server 2003. One DNS server is
inside of the corporate firewall, and the other DNS server is outside of the firewall. The external DNS
server provides name resolution for the external Internet name of the company on the Internet, and it is
configured with root hints. The internal DNS server hosts the DNS zones related to the internal network
configuration, and it is not configured with root hints.
You want to limit the exposure of the client computers to DNS-related attacks from the Internet, without
limiting their access to Internet-based sites.
Which two actions should you take? (Each correct answer presents part of the solution. Choose two.)
A.Configure the client computers to use only the internal DNS server.
B.Configure the client computers to use both DNS servers. List the internal DNS server first.
C.Configure the firewall to allow only network traffic on the DNS ports.
D.On the internal DNS server, disable recursion.
E.On the internal DNS server, configure the external DNS server as forwarder.
F.On the internal DNS server, add the external DNS server as the only root hint.
Answer:A , E

certification Microsoft   70-293   70-293 examen   certification 70-293   certification 70-293

NO.10 You are a network administrator for your company. The network consists of a single Active Directory
domain. All servers run Windows Server 2003.
All file servers for the Sales department are located in an organizational unit (OU) named SaleServers. All
file servers for the Accounting department are located in an OU named AccountServers.
You create a Group Policy Object (GPO) named SaleServersPolicy and link it to the SaleServers OU. You
create a GPO named AccountServersPolicy and link it to the AccountServers OU.
You need to ensure that only the AccountServersPolicy settings are applied to the AccountServers OU.
You must accomplish this task by using the Active Directory Users and Computers console. Your
operation must not affect other settings.
Answer.CP1 AND CP2
Step #1.
Open Active Directory Users and Computers by clicking Start > Administrative Tools > Active Directory
Users and Computers.
Step #2.
Expand the tree to show the Organizations Units (OUs). Right click on the AccountServers OU and select
Properties.
Step #3.
Go to the Group Policy tab.
Step #4.
Tick the Block Policy Inheritance checkbox then click Apply and OK.
Step #5.
Close Active Directory Users and Computers.

NO.11 You are the network administrator for Tailspin Toys. The company has a main office and two branch
offices. The network in the main office contains 10 servers and 100 client computers. Each branch office
contains 5 servers and 50 client computers. Each branch office is connected to the main office by a direct
T1 line. The network design requires that company IP addresses must be assigned from a single classful
private IP address range. The network is assigned a class C private IP address range to allocate IP
addresses for servers and client computers. Tailspin Toys acquires a company named Wingtip Toys. The
acquisition will increase the number of servers to 20 and the number of client computers to 200 in the
main office. The acquisition is expected to increase the number of servers to 20 and the number of client
computers to 200 in the branch offices. The acquisition will also add 10 more branch offices. After the
acquisition, all branch offices will be the same size. Each branch office will be connected to the main
office by a direct T1 line. The new company will follow the Tailspin Toys network design requirements. You
need to plan the IP addressing for the new company. You need to comply with the network design
requirement. What should you do?
A. Assign the main office and each branch office a new class A private IP address range.
B. Assign the main office and each branch office a new class B private IP address range.
C. Assign the main office and each branch office a subnet from a new class B private IP address range.
D.Assign the main office and each branch office a subnet from the current class C private IP address
range.
Answer: C

Microsoft   70-293 examen   70-293   certification 70-293

NO.12 You are the network administrator for your company. The network consists of a single Active Directory
domain. All servers run Windows Server 2003.
The network contains servers that have Terminal Server enabled. The terminal servers host legacy
applications that currently require users to be members of the Power Users group.
A new requirement in the company's written security policy states that the Power Users group must be
empty on all resource servers.
You need to maintain the ability to run the legacy applications on the terminal servers when the new
security requirement is implemented.
What should you do?
A. Add the Domain Users global group to the Remote Desktop Users built-in group in the domain.
B. Add the Domain Users global group to the Remote Desktop Users local group on each terminal server.
C. Modify the Compatws.inf security template settings to allow members of the local Users group to run
the applications. Import the security template into the Default Domain Controllers Policy Group Policy
object (GPO).
D. Modify the Compatws.inf security template settings to allow members of the local Users group to run
the applications. Apply the modified template to each terminal server.
Answer: D

Microsoft examen   certification 70-293   70-293   70-293 examen   70-293   70-293

NO.13 You are a network administrator for your company. All domain controllers run Windows Server 2003.
The network contains 50 Windows 98 client computers, 300 Windows 2000 Professional computers, and
150 Windows XP Professional computers. According to the network design specification, the Kerberos
version 5 authentication protocol must be used for all client computers on the internal network. You need
to ensure that Kerberos version 5 authentication is used for all client computers on the internal network.
What should you do?
A. On each domain controller, disable Server Message Block (SMB) signing and encryption of the secure
channel traffic.
B. Replace all Windows 98 computers with new Windows XP Professional computers.
C. Install the Active Directory Client Extensions software on the Windows 98 computers.
D. Upgrade all Windows 98 computers to Windows NT Workstation 4.0.
Answer: B

Microsoft examen   certification 70-293   70-293   70-293

NO.14 You are the systems engineer for Contoso, Ltd. The internal network consists of a Windows NT 4.0
domain. The company maintains a separate network that contains publicly accessible Web and mail
servers. These Web and mail servers are members of a DNS domain named contoso.com. The
contoso.com zone is hosted by a UNIX-based DNS server running BIND 4.8.1.
Contoso, Ltd., is planning to migrate to a Windows Server 2003 Active Directory domain-based network.
The migration plan states that all client computers will be upgraded to Windows XP Professional and that
all servers will be replaced with new computers running Windows Server 2003.
The migration plan specifies the following requirements for DNS in the new environment:
Active Directory data must not be accessible from the Internet.
The DNS namespace must be contiguous to minimize confusion for users and administrators.
Users must be able to connect to resources in the contoso.com domain.
Users must be able to connect to resources located on the Internet.
The existing UNIX-based DNS server will continue to host the contoso.com domain.
The existing UNIX-based DNS server cannot be upgraded or replaced.
You plan to install a Windows Server 2003 DNS server on the internal network.
You need to configure this Windows-based DNS server to meet the requirements specified in the
migration plan.
What should you do?
A.Create a primary zone named ad.contoso.com on your Windows-based DNS server. Create a
delegation record for the new zone on the UNIX-based DNS server. Configure forwarders on your
Windows-based DNS server.
B.Create a primary zone named ad.contoso.com on the UNIX-based DNS server. Create a secondary
zone on your Windows-based DNS server for the ad.contoso.com domain.
C.Create a primary zone named contoso-ad.com on your Windows-based DNS server. Create a
secondary zone on the UNIX-based DNS server for the contoso-ad.com domain.
D.Create a primary zone named contoso-ad.com on the UNIX-based DNS server. Create a stub zone on
the Windows-based DNS server for the contoso-ad.com domain. Configure conditional forwarders on
your Windows-based DNS server for the contoso-ad.com and contoso.com domains.
Answer:A

Microsoft examen   70-293   70-293   70-293 examen

NO.15 You are the network administrator for your company. The network consists of a single Active Directory
domain. All servers run Windows Server 2003.
When the network was designed, the design team set design specifications. After the network was
implemented, the deployment team set baseline specifications. The specifications for broadcast traffic
are:
The design specification requires that broadcast traffic must be 5 percent or less of total network traffic.
The baseline specification showed that the broadcast traffic is always 1 percent or less of total network
traffic during normal operation.
You need to monitor the network traffic and find out if the level of broadcast traffic is within design and
baseline specifications. You decide to use Network Monitor. After monitoring for 1 hour, you observe the
results shown in the exhibit. (Click the Exhibit button.)
You need to report the results of your observations to management.
Which two actions should you take? (Each correct answer presents part of the solution. Choose two.)
A.Report that broadcast traffic is outside of the baseline specification.
B.Report that broadcast traffic is outside of the design specification.
C.Report that broadcast traffic is within the design specification.
D.Report that broadcast traffic is within the baseline specification.
Answer:A,B

Microsoft   70-293 examen   certification 70-293   70-293 examen   70-293 examen   70-293 examen

NO.16 You are a network administrator for your company. The network contains a Windows Server 2003
computer named Server1 and ten Windows XP Professional client computers.
You configure Server1 with a LAN connection named Local Area Connection and an Internet connection
named Internet Connection. All of the client computers are connected to the LAN.
The users report that they cannot connect to the Internet. You discover that the IP configuration on the
client computers is correct.
You need to provide the ten client computers with Internet access. You must accomplish these tasks by
using the Server1's Network Connections console with the least amount of administrative effort. Your
operations must not affect other settings on Server1.
Answer.CP1 AND CP2
We need to enable Internet Connection Sharing (ICS) on the adapter named Internet Connection.
Step #1.
Open the Network Connections console by clicking Start > Control Panel > Network Connections.
Step #2.
Right click on Internet Connection and select Properties.
Step #3.
Click the Advanced tab.
Step #4.
Tick the checkbox to enable Internet Connection Sharing then click OK.
Step #5.
Click Yes.

NO.17 You are a network administrator for your company. The network consists of a single Active Directory
forest that contains three domains. The functional level of the forest and of all three domains is Window
Server 2003. The company has a main office and 30 branch offices. Each branch office is connected to
the main office by a 56-Kbps WAN connection.
You configure the main office and each branch office as a separate Active Directory site. You deploy a
Windows Server 2003 domain controller at the main office and at each branch office. Each domain
controller is configured as a DNS server.
You can log on to the network from client computers in the branch offices at any time. However, users in
the branch offices report that they cannot log on to the network during peak hours.
You need to allow users to log on to the network from branch office computers. You do not want to affect
the performance of the branch office domain controllers. You need to minimize Active Directory replication
traffic across the WAN connections.
What should you do?
A.Use Active Directory Sites and Services to enable universal group membership caching for each branch
office site.
B.Use the DNS console to configure the branch office DNS servers to forward requests to a DNS server in
the main office.
C.Use Active Directory Sites and Services to configure each branch office domain controller as a global
catalog server.
D.Use the DNS console to configure the branch office DNS servers to use an Active Directory-integrated
zone.
Answer:A

Microsoft   70-293   certification 70-293   70-293

NO.18 You are a network administrator for a consulting company. You need to create a wireless network that
will be used by consultants from your company at a customer location. The wireless network will consist of
nine portable computers, three servers, and four wireless digital cameras. All computers and cameras can
use either static or dynamic IP addressing. The cameras do not support data encryption. Both the portable
computers and the servers must be able to initiate communication over the Internet to VPN servers in
your company's main data center. Only the wireless access point is connected to the customer's
corporate network.You need to plan the wireless IP network so that it minimizes the risk of unauthorized
use of the wireless network and prevents unsolicited communication from the Internet to the hosts on the
network.What should you do?To answer, drag the appropriate configuration settings to the Wireless
Network Configuration.
Answer:

NO.19 You are the administrator for your company. The company has a new server which runs Windows
Server 2003 named Server1.
Server1 has two network connections. Internet connection is used to connect to the Internet and Local
Area Network connection is used to connect to the company network.
You need to ensure that company users can access the Internet through Server1. You also need to
prevent external, unauthorized users from accessing Server1 through the Internet. You must accomplish
this task by using the Routing and Remote Access Server Setup Wizard dialog box. Your operation must
not affect other settings on Server1.
Answer.CP1 AND CP2 AND CP3 AND CP4
Step #1.
Open the Routing and Remote Access console by clicking Start > Administrative Tools > Routing and
Remote Access.
Step #2.
Right click on Server1 and select Configure and Enable Routing and Remote Access.
Step #3.
The Routing and Remote Access Setup Wizard will open. Click Next.
Step #4.
Select Network address translation (NAT) and click Next.
Step #5.
Select "Internet Connection" as the public interface. Ensure that the "Enable security on the selected
interface...." checkbox is ticked. Then click Next.
Step #6.
Click Finish to close the wizard.
Step #7.
Close the Routing and Remote Access console.

NO.20 You are the network administrator for your company. The network consists of a single Active Directory
domain. The company's written security policy requires that computers in a file server role must have a
minimum file size for event log settings. In the past, logged events were lost because the size of the event
log files was too small. You want to ensure that the event log files are large enough to hold history. You
also want the security event log to be cleared manually to ensure that no security information is lost. The
application log must clear events as needed. You create a security template named Fileserver.inf to meet
the requirements. You need to test each file server and take the appropriate corrective action if needed.
You audit a file server by using Fileserver.inf and receive the results shown in the exhibit. (Click the
Exhibit button.) You want to make only the changes that are required to meet the requirements. Which two
actions should you take? (Each correct answer presents part of the solution. Choose two.)
A. Correct the Maximum application log size setting on the file server.
B. Correct the Maximum security log size setting on the file server.
C. Correct the Maximum system log size setting on the file server.
D. Correct the Retention method for application log setting on the file server.
E. Correct the Retention method for security log setting on the file server.
F. Correct the Retention method for system log setting for the file server.
Answer: B E

Microsoft   certification 70-293   70-293

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.